KS 72 cheyenne getting parted now - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

coop34 · 09-21-2011, 01:08 PM

Randy, Is that a tilt column?

**29od1** · 09-21-2011, 01:25 PM

Randy does the passenger door have any rust issues? If not, I would take it for $60. I can't tell exactly by the picture but I would assume it's got the screw under the wing window (as all 72s do).

Thanks,
David

72SWBChevy · 09-21-2011, 02:28 PM

Looking for a set of rear bumper brackets(with coil springs/fleetside/ sport bumper)
Shipping to 77018
Thanks,
Craig

bollybib · 09-21-2011, 03:32 PM

Can you tell what color the floor mat is ? (hard to tell with the dirt). ? I'm looking for an original saddle colored one that I can cut pieces from to patch mine. Thanks.

bguild · 09-21-2011, 05:28 PM

Randy what about the cab is it good? If so how much?

ChevyLvr4Life · 09-21-2011, 07:04 PM

Randy, Interested in the outside mirrors, what's the condition of the mirror heads themselves? Also put me in line for wing windows if tanman passes on the one. I know you said they had some pitting (how bad), would they be suitable on a driver? I'm assuming by the A/C that they are tinted?
Thanks

shouldaknown · 09-21-2011, 07:20 PM

Randy, how much for the complete grille with the headlight bezels? Any difference in the mounting between the 72 and my 69? thanks

yfs200p · 09-21-2011, 07:27 PM

Hi randy, how much for the mirrors on that honey? shipped to 11937. you just sent me a radiator pipe and PS brackets, too bad i didnt know you had this one coming it could have all been one box.
Thanks

**Dieselwrencher** · 09-21-2011, 08:18 PM

Randy, I'll get in line for the mirrors and I want any of the cab interior hard ware you want to sell shipped to 50169. Thanks Ryan.

Chevtruckguy · 09-21-2011, 08:19 PM

Hello,I was just wondering if you haven't sold the exhaust manifolds,if you could put me in line. I need the right side for sure,mine is blown out.

Thanks

teeitup · 09-21-2011, 10:26 PM

Coop, sorry no tilt

29od1, David, not bad some bubbles on the outside corner, pics will be posted here in a bit. I forgot to look and see if it was a 72 door but I don't think it is

72SWBchevy, Craig, sorry none right now

Bollybib, its black sorry

Bguild, its rusty, I'll have to crawl under it and check it out, it will be Fri after work

Chevylvr4life, the pass mirror head, the seal is coming out, I'll get better pics of both, $35 plus shipping on them. Your in line on the wings, they would good for a driver

Shouldaknown, Brandon, $60 for complete grill, they mount the same, but don't have turn signal housing in it

yfs200p, your 2nd on mirrors, $35 plus ship

dieselwrencher, Ryan, your 3rd in line on mirrors. What are you needing on cab stuff?

Chevtruckguy, I think I have a pass side one out there off another truck $25 plus shipping

Thanks Randy

Chevtruckguy · 09-21-2011, 10:36 PM

pm sent, thanks

teeitup · 09-21-2011, 10:40 PM

Got some of the stuff off

teeitup · 09-21-2011, 10:42 PM

71111111111111111

teeitup · 09-21-2011, 10:43 PM

76666666666

teeitup · 09-21-2011, 10:44 PM

8111111111111

teeitup · 09-21-2011, 10:52 PM

Pete, all that is there is the switch

Sean, dash pad is bad, it had a hard plastic cover over it. Also I'd like to keep clips with visors, sorry

Chevbuldr, guessing shipping at $25 for manifolds, but can get a firm quote is still interested?

camaro_nut, pic of the outer ones on here now still haven't got center out yet, the chrome is faded on it, $36 shipped for all 3

Thanks Randy

Isanti Lawn Man · 09-21-2011, 10:57 PM

Randy,

Is that a black steering wheel..........put me in line for it if its in decent shape. If you could let me know if it is indeed black and what shape it is in.

Thanks!

-Mike

Hubscrub · 09-21-2011, 11:06 PM

Randy i'm interested in the steering column if in good shape, sway bar.

teeitup · 09-21-2011, 11:11 PM

Insanti lawn man, Mike, its not original steering wheel, sorry

Hubscrub, I'll check it out once its taken out. I'll hopefully get to parting it some more Fri after work and Sun morning

Thanks Randy

bmfm64 · 09-21-2011, 11:35 PM

Let me know if he passes on the aux switch and how much for it and the mirrors from other thread and what you would need for the cd player as well if it works. Thanks!

**DeadheadNM** · 09-21-2011, 11:48 PM

Randy, what about the wiring harness, floor pan mounted rock protector for two way valve, and the valve itself? Any of this still there?

Camaro_nut2001 · 09-21-2011, 11:50 PM

Quote:

Originally Posted by teeitup

Pete, all that is there is the switch

Sean, dash pad is bad, it had a hard plastic cover over it. Also I'd like to keep clips with visors, sorry

Chevbuldr, guessing shipping at $25 for manifolds, but can get a firm quote is still interested?

camaro_nut, pic of the outer ones on here now still haven't got center out yet, the chrome is faded on it, $36 shipped for all 3

Thanks Randy

Great price Randy but I think I may have bought a whole truck with an A/C cab so i'll have to pass on them but please keep me in mind on a good tailgate. Thank you, Ted.

shouldaknown · 09-22-2011, 12:13 AM

seriously? I'll take it! just let me know when you want me to come pick it up. what do you want for the door sill plates? might be interested in the hood too, if it's straight. getting tired of trying to pound the kink out of mine...

Vintage Windmills · 09-22-2011, 12:49 AM

Randy, were you able to test CD player and/or determine a price? Also, just wanted to point out I asked about cab on page 1. No rush on my behalf for anything. Take care,

Jud

09-21-2011, 01:08 PM	#26
coop34 Registered User Join Date: Sep 2009 Location: Visalia, CA Posts: 247	Re: 72 cheyenne getting parted now Randy, Is that a tilt column?

09-21-2011, 01:25 PM	#27
29od1 Registered User Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: 72 cheyenne getting parted now Randy does the passenger door have any rust issues? If not, I would take it for $60. I can't tell exactly by the picture but I would assume it's got the screw under the wing window (as all 72s do). Thanks, David

09-21-2011, 02:28 PM	#28
72SWBChevy Registered User Join Date: Jun 2004 Location: Houston Tx Posts: 753	Re: 72 cheyenne getting parted now Looking for a set of rear bumper brackets(with coil springs/fleetside/ sport bumper) Shipping to 77018 Thanks, Craig __________________ 1977 Camaro 468 BBC - SOLD - 1972 Chevy SWB....in the works!! 2006 Crew Cab Dmax/Allison Summit White-SOLD- 2009 Toyota Tacoma V6 Pre Runner - daily driver - my build thread -http://67-72chevytrucks.com/vboard/s...95#post4774595 Last edited by 72SWBChevy; 09-21-2011 at 03:32 PM. Reason: more info

09-21-2011, 03:32 PM	#29
bollybib Registered User Join Date: Nov 2010 Location: Carlsbad, CA Posts: 1,584	Re: 72 cheyenne getting parted now Can you tell what color the floor mat is ? (hard to tell with the dirt). ? I'm looking for an original saddle colored one that I can cut pieces from to patch mine. Thanks. __________________ - Jim - My Daily Driver is a 1969 Chevrolet Custom/20 Fleetside 350/TH400/Eaton H052 4.10 and its Project thread is here http://67-72chevytrucks.com/vboard/s...d.php?t=456911 Last edited by bollybib; 09-21-2011 at 06:40 PM.

09-21-2011, 05:28 PM	#30
bguild Registered User Join Date: Mar 2008 Location: kansas city mo Posts: 898	Re: 72 cheyenne getting parted now Randy what about the cab is it good? If so how much? __________________ Project "Edna Marie"http://www.67-72chevytrucks.com/vboa...74#post5998074 Toys: 2014 Dodge Ram 1967 SHORTBED

09-21-2011, 07:04 PM	#31
ChevyLvr4Life Registered User Join Date: Aug 2010 Location: Martinsville, VA Posts: 150	Re: 72 cheyenne getting parted now Randy, Interested in the outside mirrors, what's the condition of the mirror heads themselves? Also put me in line for wing windows if tanman passes on the one. I know you said they had some pitting (how bad), would they be suitable on a driver? I'm assuming by the A/C that they are tinted? Thanks __________________ 1970 Chevy C10 LWB 307 3OTT 3.73 gear

09-21-2011, 07:20 PM	#32
shouldaknown Registered User Join Date: Aug 2011 Location: Topeka, KS Posts: 25	Re: 72 cheyenne getting parted now Randy, how much for the complete grille with the headlight bezels? Any difference in the mounting between the 72 and my 69? thanks

09-21-2011, 07:27 PM	#33
yfs200p E.H.F.D Engine #2 Join Date: Feb 2003 Location: East Hampton, NY Long Island Posts: 916	Re: 72 cheyenne getting parted now Hi randy, how much for the mirrors on that honey? shipped to 11937. you just sent me a radiator pipe and PS brackets, too bad i didnt know you had this one coming it could have all been one box. Thanks __________________ -NICK '72 K10 SWB Fleetside. Avocado Highlander 350-4speed-NP205 Frame Off Re-Creation '89 GMC V3500 C/C Flatbed Plow Truck 454/SM465/Np205 '15 Chevy 2500HD CCSB High Country Duramax '22 Tahoe Premier Duramax

09-21-2011, 08:18 PM	#34
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: 72 cheyenne getting parted now Randy, I'll get in line for the mirrors and I want any of the cab interior hard ware you want to sell shipped to 50169. Thanks Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-21-2011, 08:19 PM	#35
Chevtruckguy Registered User Join Date: Apr 2011 Location: Omaha NE Posts: 13	Re: 72 cheyenne getting parted now Hello,I was just wondering if you haven't sold the exhaust manifolds,if you could put me in line. I need the right side for sure,mine is blown out. Thanks

09-21-2011, 10:26 PM	#36
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 cheyenne getting parted now Coop, sorry no tilt 29od1, David, not bad some bubbles on the outside corner, pics will be posted here in a bit. I forgot to look and see if it was a 72 door but I don't think it is 72SWBchevy, Craig, sorry none right now Bollybib, its black sorry Bguild, its rusty, I'll have to crawl under it and check it out, it will be Fri after work Chevylvr4life, the pass mirror head, the seal is coming out, I'll get better pics of both, $35 plus shipping on them. Your in line on the wings, they would good for a driver Shouldaknown, Brandon, $60 for complete grill, they mount the same, but don't have turn signal housing in it yfs200p, your 2nd on mirrors, $35 plus ship dieselwrencher, Ryan, your 3rd in line on mirrors. What are you needing on cab stuff? Chevtruckguy, I think I have a pass side one out there off another truck $25 plus shipping Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-21-2011, 10:36 PM	#37
Chevtruckguy Registered User Join Date: Apr 2011 Location: Omaha NE Posts: 13	Re: 72 cheyenne getting parted now pm sent, thanks

09-21-2011, 10:40 PM	#38
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 cheyenne getting parted now Got some of the stuff off Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-21-2011, 10:42 PM	#39
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 cheyenne getting parted now 71111111111111111 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-21-2011, 10:43 PM	#40
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 cheyenne getting parted now 76666666666 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

09-21-2011, 10:44 PM	#41
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 cheyenne getting parted now 8111111111111 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-21-2011, 10:52 PM	#42
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 cheyenne getting parted now Pete, all that is there is the switch Sean, dash pad is bad, it had a hard plastic cover over it. Also I'd like to keep clips with visors, sorry Chevbuldr, guessing shipping at $25 for manifolds, but can get a firm quote is still interested? camaro_nut, pic of the outer ones on here now still haven't got center out yet, the chrome is faded on it, $36 shipped for all 3 Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-21-2011, 10:57 PM	#43
Isanti Lawn Man Registered User Join Date: Oct 2010 Location: Isanti, MN Posts: 75	Re: 72 cheyenne getting parted now Randy, Is that a black steering wheel..........put me in line for it if its in decent shape. If you could let me know if it is indeed black and what shape it is in. Thanks! -Mike __________________ - Mike 2004 Chevy Silverado 1999 Chevy Suburban 1972 Custom Deluxe 10 1973 Cheyenne 10

09-21-2011, 11:06 PM	#44
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: 72 cheyenne getting parted now Randy i'm interested in the steering column if in good shape, sway bar. __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14

09-21-2011, 11:11 PM	#45
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 72 cheyenne getting parted now Insanti lawn man, Mike, its not original steering wheel, sorry Hubscrub, I'll check it out once its taken out. I'll hopefully get to parting it some more Fri after work and Sun morning Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-21-2011, 11:35 PM	#46
bmfm64 Registered User Join Date: May 2011 Location: Covington, Wa Posts: 5,240	Re: 72 cheyenne getting parted now Let me know if he passes on the aux switch and how much for it and the mirrors from other thread and what you would need for the cd player as well if it works. Thanks!

09-21-2011, 11:48 PM	#47
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,446	Re: 72 cheyenne getting parted now Randy, what about the wiring harness, floor pan mounted rock protector for two way valve, and the valve itself? Any of this still there? __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

09-22-2011, 12:13 AM	#49
shouldaknown Registered User Join Date: Aug 2011 Location: Topeka, KS Posts: 25	Re: 72 cheyenne getting parted now seriously? I'll take it! just let me know when you want me to come pick it up. what do you want for the door sill plates? might be interested in the hood too, if it's straight. getting tired of trying to pound the kink out of mine...

09-22-2011, 12:49 AM	#50
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 72 cheyenne getting parted now Randy, were you able to test CD player and/or determine a price? Also, just wanted to point out I asked about cab on page 1. No rush on my behalf for anything. Take care, Jud __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

Register or Log In To remove these advertisements.