AK Wanted: Factory 4x4 Wheel Caps - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kilomanjaro · 10-03-2011, 11:28 PM

TTT...Still looking.....I will assemble a set if guys have 1 or 2 to sell.

I am looking for a complete set of four center wheel caps for a 72 chevy blazer 4x4. I need them to go on a stock 16" x 6" 6 lug steel wheel. I can measure the mounting diameter. I would be ok with a nice chrome set (prefered) or a nice white set. I am looking for the "dog dish" style with the blue bowtie in the middle. I am not looking for the full hub-cap style. Thanks and let me know what you have.
John

Posted via Mobile Device

70LonghornCST · 10-03-2011, 11:35 PM

You are looking for 2 of these, and two without the centers, correct? To be factory correct, make sure that the cap is concurved (curved upward), not concaved(curved down). The '73-up style looks similar, but is concaved like a bowl in the center. Some people have painted the center bowties to appear correct. I only have one for sale here.

kilomanjaro · 10-03-2011, 11:38 PM

That is exactly what I am looking for....I guess I need two with bow ties and two with an open center for the hub. Thanks for the tip on getting original ones...I didn't know that.
Posted via Mobile Device

**special-K** · 10-04-2011, 08:23 AM

FYI,that picture is a hubcap for the 8-lug wheels. All 5 and 6-lug caps will fit and are the same. Of course,all 4wd 1/2 tons are 6-lug.

Mt Man Chad · 10-04-2011, 08:51 AM

Get a hold of frank "pickmup" he might have what your looking for.

**Classic Bowties** · 10-04-2011, 08:54 AM

Quote:

Originally Posted by 70LonghornCST

You are looking for 2 of these, and two without the centers, correct? To be factory correct, make sure that the cap is concurved (curved upward), not concaved(curved down). The '73-up style looks similar, but is concaved like a bowl in the center. Some people have painted the center bowties to appear correct.

After reading and then re-reading John's post, you are correct about him needing two open w/o centers (front) and then two closed w/blue bowties (rear), but I dont think your pictured 12" 3/4 ton cap will work for him. He is wanting this set for a K/5 w/16" six lug, which should be the 10.5" type like I have pictured below, these would fit/be correct for the K/5-10 GM/Kelsey-Hayes type six lug centers in 15's, 16's & even the 16.5's. Unlike the larger 3/4 ton caps, both styles of these 1/2 ton chrome w/blue bowtie or stainless w/yellow bowtie caps were all stamped concave in the center no matter the color. Mel

70LonghornCST · 10-04-2011, 09:44 AM

Quote:

Originally Posted by Classic Bowties

After reading and then re-reading John's post, you are correct about him needing two open w/o centers (front) and then two closed w/blue bowties (rear), but I dont think your pictured 12" 3/4 ton cap will work for him. He is wanting this set for a K/5 w/16" six lug, which should be the 10.5" type like I have pictured below, these would fit/be correct for the K/5-10 GM/Kelsey-Hayes type six lug centers in 15's, 16's & even the 16.5's. Unlike the larger 3/4 ton caps, both styles of these 1/2 ton chrome w/blue bowtie or stainless w/yellow bowtie caps were all stamped concave in the center no matter the color. Mel

Great info, Mel!

viking427 · 10-04-2011, 06:01 PM

Kilo, how about a couple bright pics of those 16x6 6 lug 4x4 steelies. They're so rare, its probably the only way any of us will ever see what they look like

kilomanjaro · 10-05-2011, 12:08 AM

Mel, you set isn't for sale is it?

Viking, I assume you are kidding about these being rare

I can take a few pics if you were serious. I really don't know how common they are.
Posted via Mobile Device

kilomanjaro · 11-21-2011, 03:37 AM

TTT still looking. Willing to pay a good price for a nice set...they only need to be driver qualit though. Painted or chrome is fine.
Posted via Mobile Device

71 super · 11-21-2011, 07:46 PM

I have a pair of white NOS caps, no boxes but are very nice. Let me know if interested and I will post pictures.

kilomanjaro · 11-22-2011, 12:09 AM

I may be interested...are they fronts or backs? can you post a pic and price?
John
Posted via Mobile Device

**6t727t2** · 11-22-2011, 10:33 AM

John, would these work for you?
http://67-72chevytrucks.com/vboard/s...hlight=dogdish

kilomanjaro · 11-22-2011, 05:06 PM

I'll take them. Can you still do $50 shipped for me in Alaska? they would have to be shipped to a PO box so it would have to be by priority mail or parcel post. Let me know.
John
Posted via Mobile Device

kilomanjaro · 11-22-2011, 05:06 PM

Still need 2 white open ones for the front.
John
Posted via Mobile Device

**too much stuff** · 11-22-2011, 05:52 PM

Quote:

Originally Posted by kilomanjaro

Still need 2 white open ones for the front.
John
Posted via Mobile Device

I don't recall white, open 4x4 caps being made. I think they were chrome or stainless.
I might be able to put together a set of stainless if you are still looking.

10-03-2011, 11:28 PM	#1
kilomanjaro Senior Member Join Date: Mar 2001 Location: From Kansas now in Palmer, Alaska Posts: 807	Wanted: Factory 4x4 Wheel Caps TTT...Still looking.....I will assemble a set if guys have 1 or 2 to sell. I am looking for a complete set of four center wheel caps for a 72 chevy blazer 4x4. I need them to go on a stock 16" x 6" 6 lug steel wheel. I can measure the mounting diameter. I would be ok with a nice chrome set (prefered) or a nice white set. I am looking for the "dog dish" style with the blue bowtie in the middle. I am not looking for the full hub-cap style. Thanks and let me know what you have. John Posted via Mobile Device __________________ 63 Buick Wildcat 425 72 Chevy Blazer CST 72 Chevy C10 Cheyenne 00 Ford F-350 Super Duty 7.3L 09 Dodge Challenger SRT-8 10 Ford Expedition Limited Last edited by kilomanjaro; 11-21-2011 at 03:36 AM.

10-03-2011, 11:35 PM	#2
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Wanted: Factory 4x4 Wheel Caps You are looking for 2 of these, and two without the centers, correct? To be factory correct, make sure that the cap is concurved (curved upward), not concaved(curved down). The '73-up style looks similar, but is concaved like a bowl in the center. Some people have painted the center bowties to appear correct. I only have one for sale here. Attached Images __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal Last edited by 70LonghornCST; 10-03-2011 at 11:37 PM. Reason: edit details

10-03-2011, 11:38 PM	#3
kilomanjaro Senior Member Join Date: Mar 2001 Location: From Kansas now in Palmer, Alaska Posts: 807	Re: Wanted: Factory 4x4 Wheel Caps That is exactly what I am looking for....I guess I need two with bow ties and two with an open center for the hub. Thanks for the tip on getting original ones...I didn't know that. Posted via Mobile Device __________________ 63 Buick Wildcat 425 72 Chevy Blazer CST 72 Chevy C10 Cheyenne 00 Ford F-350 Super Duty 7.3L 09 Dodge Challenger SRT-8 10 Ford Expedition Limited

10-04-2011, 08:23 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Wanted: Factory 4x4 Wheel Caps FYI,that picture is a hubcap for the 8-lug wheels. All 5 and 6-lug caps will fit and are the same. Of course,all 4wd 1/2 tons are 6-lug. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-04-2011, 08:51 AM	#5
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,864	Re: Wanted: Factory 4x4 Wheel Caps Get a hold of frank "pickmup" he might have what your looking for. __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread

10-04-2011, 06:01 PM	#8
viking427 Registered User Join Date: Aug 2011 Location: Dallas TX Posts: 225	Re: Wanted: Factory 4x4 Wheel Caps Kilo, how about a couple bright pics of those 16x6 6 lug 4x4 steelies. They're so rare, its probably the only way any of us will ever see what they look like

10-05-2011, 12:08 AM	#9
kilomanjaro Senior Member Join Date: Mar 2001 Location: From Kansas now in Palmer, Alaska Posts: 807	Re: Wanted: Factory 4x4 Wheel Caps Mel, you set isn't for sale is it? Viking, I assume you are kidding about these being rare I can take a few pics if you were serious. I really don't know how common they are. Posted via Mobile Device __________________ 63 Buick Wildcat 425 72 Chevy Blazer CST 72 Chevy C10 Cheyenne 00 Ford F-350 Super Duty 7.3L 09 Dodge Challenger SRT-8 10 Ford Expedition Limited

11-21-2011, 03:37 AM	#10
kilomanjaro Senior Member Join Date: Mar 2001 Location: From Kansas now in Palmer, Alaska Posts: 807	Re: Wanted: Factory 4x4 Wheel Caps TTT still looking. Willing to pay a good price for a nice set...they only need to be driver qualit though. Painted or chrome is fine. Posted via Mobile Device __________________ 63 Buick Wildcat 425 72 Chevy Blazer CST 72 Chevy C10 Cheyenne 00 Ford F-350 Super Duty 7.3L 09 Dodge Challenger SRT-8 10 Ford Expedition Limited

11-21-2011, 07:46 PM	#11
71 super Registered User Join Date: Sep 2005 Location: Canton North carolina Posts: 3,080	Re: Wanted: Factory 4x4 Wheel Caps I have a pair of white NOS caps, no boxes but are very nice. Let me know if interested and I will post pictures. __________________ 67 blue step side- bb 68 gold and white swb cst anniversary 68 custom swb hot rod Ls swap 69 swb cst 6 cylinder/ overdrive 69 black/black cst bb swb 70 orange and white cst Canada built truck swb bb 71 black and white super swb bb 71 red and white super swb 72 green and white super swb 4x4 62 nova wagon 400 series Ls swapped 68 Camaro 327/4 speed- 1 owner, original paint 66 Volkswagen bettle 69 auto stick Volkswagen Beetle

11-22-2011, 12:09 AM	#12
kilomanjaro Senior Member Join Date: Mar 2001 Location: From Kansas now in Palmer, Alaska Posts: 807	Re: Wanted: Factory 4x4 Wheel Caps I may be interested...are they fronts or backs? can you post a pic and price? John Posted via Mobile Device __________________ 63 Buick Wildcat 425 72 Chevy Blazer CST 72 Chevy C10 Cheyenne 00 Ford F-350 Super Duty 7.3L 09 Dodge Challenger SRT-8 10 Ford Expedition Limited

11-22-2011, 10:33 AM	#13
6t727t2 Active Member Join Date: Dec 2004 Location: NJ Posts: 6,456	Re: Wanted: Factory 4x4 Wheel Caps John, would these work for you? http://67-72chevytrucks.com/vboard/s...hlight=dogdish

11-22-2011, 05:06 PM	#14
kilomanjaro Senior Member Join Date: Mar 2001 Location: From Kansas now in Palmer, Alaska Posts: 807	Re: Wanted: Factory 4x4 Wheel Caps I'll take them. Can you still do $50 shipped for me in Alaska? they would have to be shipped to a PO box so it would have to be by priority mail or parcel post. Let me know. John Posted via Mobile Device __________________ 63 Buick Wildcat 425 72 Chevy Blazer CST 72 Chevy C10 Cheyenne 00 Ford F-350 Super Duty 7.3L 09 Dodge Challenger SRT-8 10 Ford Expedition Limited



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.