bedside skins

[jlaird]

are bedside(fleetside) outer skins reproduced? Not the whole bedside, but just the outer skin.

[GASoline71]

Yep.

Gary

[bcutt]

Do you have a link or anything? Ive never seen them but i would like to..

Originally Posted by GASoline71

Yep.

Gary

[longbed67]

http://www.lmctruck.com/features/cb/...htm#partsTable

[longbed67]

heres some if you have a long bed


http://www.classicindustries.com/truck/parts/17173.html

[bcutt]

He is asking if just the outer bedskin is reproduced, that is the complete bedside.
Posted via Mobile Device

[longbed67]

bcutt your right... I apologize i read over that part... I know they make them.... I will have to call keystone maybe they carry them.

[jlaird]

yes, just the outer skin. thanks

[mbgmike]

no one i know of sells a 1 piece skin .We sell an american made 2 piece skin you have to weld together. Let me know if interested

[mbgmike]

Originally Posted by longbed67

bcutt your right... I apologize i read over that part... I know they make them.... I will have to call keystone maybe they carry them.

Keystone does not carry them JFI

[jlaird]

Originally Posted by mbgmike

no one i know of sells a 1 piece skin .We sell an american made 2 piece skin you have to weld together. Let me know if interested

more info please.

[mbgmike]

Originally Posted by jlaird

more info please.

The front panel is 55 inches long and 34 inches tall int the front. The rear is 53 inches long and 35 inches tall in the back. they wrap around the back 4 inches but no taillight openings.

[jlaird]

Originally Posted by mbgmike

The front panel is 55 inches long and 34 inches tall int the front. The rear is 53 inches long and 35 inches tall in the back. they wrap around the back 4 inches but no taillight openings.

do you have any pictures? Sounds like it would have to be welded together? When you said two piece, I was thinking the outer skin as one piece, and the inner skin as the second piece.

[72gmcshorty]

Originally Posted by jlaird

do you have any pictures? Sounds like it would have to be welded together? When you said two piece, I was thinking the outer skin as one piece, and the inner skin as the second piece.

take the outer skin and cut it in half right at the top of the wheel arch. thats where the weld seam is.

[mbgmike]

this is the only pic i have right now. its the backside

[jlaird]

Do you have 67's with no marker hole? How much do these cost?

[Tim Christian]

Why would you do this? You would have more money in parts, time, and body supplies this way then just buying a bed side???? Just wondering

[mbgmike]

Originally Posted by jlaird

Do you have 67's with no marker hole? How much do these cost?

No. we just weld in the fillers from Infinati. the panels are $135.00 each. so its 270.00 PER SIDE. Like Tim says you would be better off time and money replacing the side. We are set up to do this kind of stuff so its easy for us. but if it was my truck i would use the complete sides. The repros are a good part. I am one of those wierdos who like working with sheetmetal so cost is not always the driving factor. You could maybe drive down to Top Banana and pick them up

JFI when we ship bedsides to germany we have to cut them in half anyway to comply with their laws so the two piece panels make sense. These guys don't mind welding them.

[72gmcshorty]

how do you make the area for the tailights work with this panel?

[jlaird]

Originally Posted by Tim Christian

Why would you do this? You would have more money in parts, time, and body supplies this way then just buying a bed side???? Just wondering

I am going to make a custom bed, dont need the inner skin at all. I will be fabricating that. So I either disassemble my bedsides and repair the rust areas on the bottom of the outer skin, or just source rust free outer skins. So at this point, my options are weld the two piece skin together which I don't want to do, buy new bedsides and disassemble those, or work with what I have. Lately I've been working with what I have and swearing at my self in the process for doing so

[mbgmike]

Originally Posted by jlaird

I am going to make a custom bed, dont need the inner skin at all. I will be fabricating that. So I either disassemble my bedsides and repair the rust areas on the bottom of the outer skin, or just source rust free outer skins. So at this point, my options are weld the two piece skin together which I don't want to do, buy new bedsides and disassemble those, or work with what I have. Lately I've been working with what I have and swearing at my self in the process for doing so

I would just use what you have if they are repairable. post some pics when finished

[mbgmike]

Originally Posted by 72gmcshorty

how do you make the area for the tailights work with this panel?

i made a 2 piece die to roll the edges over. used a little heat. Not exact like oem but it works.

[Tim Christian]

Ok I understand now. I did not realize you did not need inners at all. Mike should be able to take care of you with his panels. If you have to weld two together the marker hole will be a breze to fill.