What did you get done 10/8/2011 edition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old Rusty C10** · 10-09-2011, 05:13 PM

I got my column upper and lower installed today and I dropped off my seat to an upholsterer to put the LMC Cover on.My new dash pad has some cracks that developed since i bought it a week ago and i am getting a cover for it
how about you all?

PS i was very happy to see not only did the Yankees lose but the phillies did too their first round of the playoffs... I think im rooting for the Brewers and the Tigers for the series

lanconcj · 10-09-2011, 05:41 PM

I put my new motor in. It is bolted up at the fly wheel and block. Motor mounts are tight. I am trying to remember how all these brackets go back together.
Posted via Mobile Device

notyo_cheez · 10-09-2011, 05:52 PM

Scored a bench seat, a pair of seatbelts in decent shape and a dash pad in fair condition. Rain today and nothing else. Getting some AllMetal filler this week so I can finish the cab prep.

S10Fan · 10-09-2011, 06:48 PM

Took my '50 on it's first road trip Saturday. Drove two and a half hours up to Fredricksburg Va for the 2011 Rockabilly HotRod Rumble. The show drew well over 300 cars this year. As always the Central Virginia chapter of the Karb Kings did an outstanding job running the event.

Today I gave the Heap a much needed bath and mild detailing.

Show pics and a short "Cruising" video......

http://s430.photobucket.com/albums/q...0Rod%20Rumble/

17North - YouTube

S10Fan · 10-09-2011, 07:37 PM

Fixed the picture link

cjlinkster · 10-09-2011, 08:11 PM

I scored a pair of factory stainless steel side mirrors from the junk yard along with a factory tire jack (it bug me that I didn't have a factory jack).

I need to post the pics of the mirrors, they look so much better than the dented, faded, and pitted aftermarket chromed mirrors. I discovered that my aftermarket mirrors were actually plastic.

StrokinRat · 10-09-2011, 08:55 PM

I was packing up my trucks and headed home from 5 days at Cruisin the Coast. There were over 5,400 antique cars/trucks registered and a ton of others that brought there rides to just cruise around. If you've never been to this show and are some what close to the coast of Mississippi t
is one show that should be on you bucket list. If you can dream it then its probable there.
Posted via Mobile Device

jitteryguy · 10-09-2011, 09:14 PM

spent the weekend at Jumeirah beach, got sun burnt but still had a good time

85burb · 10-09-2011, 09:39 PM

I "tested" out the new truetrac a few times. Got quite a bit sideways one time. Also i fixed a power steering leak, bolted down passenger side seat half way. The truck has bucket seats and did not come with them so PO only bolted the out side track down. I have the front mount i still need to install. It is sad it has taken me over 4 years to install one bolt... Also sealed a vaccum fitting in my intake.

chrohm · 10-09-2011, 10:19 PM

farted with trying to get the S spring into place with the door on...wound up bending the hell out of it and throwing my hands up...went and washed my truck instead and noticed one of my 22" boss rims is bent in one area just a bit...not a good day

I did dremel the door panels so the door locks and electric window switches set flush, the previous owner had them sticking out a bit

TJBrown · 10-09-2011, 10:22 PM

Big Weekend. Worked on the truck this weekend out at my dads. Well, needless to say, she made it to the house today. 45 Minute drive to the house and it was awesome. Windows down and the Sliding Glass open. Radio doesn't work yet but i got to listen to the duals all the way to the house.

875.3CHEVY · 10-09-2011, 10:24 PM

made my bed pretty much useless

68GMC_Dan · 10-09-2011, 10:36 PM

Slapped on some rattle can to the Driving Project!

Before:

After:

sethv · 10-09-2011, 10:42 PM

That looks awesome!

I love rattle can paint jobs.

Today I played around with 4 lo. Got to the bottom of my driveway and just let off the clutch. The truck climbed up it (slowly. lol) but on its own. It was pretty cool.

68GMC_Dan · 10-09-2011, 11:00 PM

Quote:

Originally Posted by sethv

That looks awesome!

I love rattle can paint jobs.
.

Thanks. Think it gives it that classy look for rinsing off mud!!!

SCOTI · 10-10-2011, 01:32 AM

Quote:

Originally Posted by old Rusty C10

I got my column upper and lower installed today and I dropped off my seat to an upholsterer to put the LMC Cover on.My new dash pad has some cracks that developed since i bought it a week ago and i am getting a cover for it
how about you all?

PS i was very happy to see not only did the Yankees lose but the phillies did too their first round of the playoffs... I think im rooting for the Brewers and the Tigers for the series

I did a 'dry' install of all the various accesories for the dually's bbc. I'm diggin 'em.... Sat, I worked on some basic fluids maint for another truck (coolant, trans, & rear-end fluid flushes) but was rushed to get it done as I had a seat @ Game-1 for the ALCS between the Texas Rangers & Detroit.

The traffic was lousy but we made it & even endured the rain delays. The Rangers did what everyone thought was not possible & got the win against Detroits ace. I was supposed to go again tonight but ma' nature had other plans & we definitely needed some rain. Rained off/on most of the afternoon so not much else accomplished.

Quick, crappy cell phone pic while playing around Friday night & a random pic from the game. I really liked that guys sign....

ghettoluxury · 10-10-2011, 11:37 AM

Got the front calipers ground down on the Dana 60, now it will clear 15" rims.

bigwheel15 · 10-10-2011, 08:26 PM

Painted my door panels and searched for plasti-dip but came up empty handed.

chrohm · 10-11-2011, 01:01 AM

Quote:

Originally Posted by jitteryguy

spent the weekend at Jumeirah beach, got sun burnt but still had a good time

anyone ever call you...."The Dude"?

gofastbobby · 10-11-2011, 05:27 PM

I made lemonade out of lemons this weekend.

I took advantage of the great weather saturday and took the truck out for some junkyard cruising. Found a couple good parts trucks and a few nice boneyards that are off the beaten path. on the way back with a bed full of parts the transmission failed. 250 miles was all i got out of it. I parked it in a buddies back yard, started a campfire and drank his beer until he got home from work. Turned out to be a great weekend.

73gmc454 · 10-11-2011, 08:04 PM

ran about 150 bucks worth of gas through the truck and had a great time doin it !

99-LS1-SS · 10-11-2011, 08:20 PM

Sorry, wrong place to post....

10-09-2011, 05:13 PM	#1
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	What did you get done 10/8/2011 edition I got my column upper and lower installed today and I dropped off my seat to an upholsterer to put the LMC Cover on.My new dash pad has some cracks that developed since i bought it a week ago and i am getting a cover for it how about you all? PS i was very happy to see not only did the Yankees lose but the phillies did too their first round of the playoffs... I think im rooting for the Brewers and the Tigers for the series __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

10-09-2011, 05:41 PM	#2
lanconcj Registered User Join Date: May 2011 Location: Anahuac Tx Posts: 111	Re: What did you get done 10/8/2011 edition I put my new motor in. It is bolted up at the fly wheel and block. Motor mounts are tight. I am trying to remember how all these brackets go back together. Posted via Mobile Device

10-09-2011, 05:52 PM	#3
notyo_cheez Registered User Join Date: Apr 2011 Location: corpus christi, tx - america's fattest city Posts: 253	Re: What did you get done 10/8/2011 edition Scored a bench seat, a pair of seatbelts in decent shape and a dash pad in fair condition. Rain today and nothing else. Getting some AllMetal filler this week so I can finish the cab prep.

10-09-2011, 07:37 PM	#5
S10Fan Old Heap Driver Join Date: Mar 2008 Location: Newport News, Va Posts: 2,642	Re: What did you get done 10/8/2011 edition Fixed the picture link __________________ _____________________________ Bryan '99 Silverado 1500, 4.3, 5-speed, reg cab, short bed '50 Chevy 2DR Hard Top, 350/350, M2 Front End, 3:08 gear, cruiser. '40 F**d Sedan, all Chevy power, Heidt's front end, TCI rear, nice driver.

10-09-2011, 08:11 PM	#6
cjlinkster Registered User Join Date: Jun 2011 Location: Atlanta ga Posts: 150	Re: What did you get done 10/8/2011 edition I scored a pair of factory stainless steel side mirrors from the junk yard along with a factory tire jack (it bug me that I didn't have a factory jack). I need to post the pics of the mirrors, they look so much better than the dented, faded, and pitted aftermarket chromed mirrors. I discovered that my aftermarket mirrors were actually plastic. __________________ 1984 C20, 454, 4 speed named "Gold Member"

10-09-2011, 08:55 PM	#7
StrokinRat Registered User Join Date: Jun 2009 Location: Clinton,MS Posts: 234	Re: What did you get done 10/8/2011 edition I was packing up my trucks and headed home from 5 days at Cruisin the Coast. There were over 5,400 antique cars/trucks registered and a ton of others that brought there rides to just cruise around. If you've never been to this show and are some what close to the coast of Mississippi t is one show that should be on you bucket list. If you can dream it then its probable there. Posted via Mobile Device __________________ 85 Chevy C-10 383 stroker

10-09-2011, 09:14 PM	#8
jitteryguy GoatLube Experss Join Date: Oct 2009 Location: clarksville, Tn. Posts: 1,337	Re: What did you get done 10/8/2011 edition spent the weekend at Jumeirah beach, got sun burnt but still had a good time Attached Images __________________ *Goat Lube Express*, locations in Qalat,Afghanistan & Clarksville, Tn. '87 R30 dually 454/TH400 '85 1/2 ton CCSB '92 S10 350/350 '84 MonteCarlo 383/PG/9"ford '78 Malibu wagon 350/350 '78 Cutlass (project family car) '96 S10 Jimmy (Moma's)

10-09-2011, 09:39 PM	#9
85burb Registered User Join Date: Dec 2009 Location: lindale,tx Posts: 2,373	Re: What did you get done 10/8/2011 edition I "tested" out the new truetrac a few times. Got quite a bit sideways one time. Also i fixed a power steering leak, bolted down passenger side seat half way. The truck has bucket seats and did not come with them so PO only bolted the out side track down. I have the front mount i still need to install. It is sad it has taken me over 4 years to install one bolt... Also sealed a vaccum fitting in my intake. __________________ 82 c10 5.3/4l60 84 c20 5.3/sm465 85 chevy k10 suburban LQ4/4l60 91 chevy c10 suburban Lsa 5.3/4l60 2017 Silverado whipple 5.3 1964 Vw beetle 1974 vw beetle

10-09-2011, 10:19 PM	#10
chrohm Registered User Join Date: Sep 2011 Location: longview, texas Posts: 28	Re: What did you get done 10/8/2011 edition farted with trying to get the S spring into place with the door on...wound up bending the hell out of it and throwing my hands up...went and washed my truck instead and noticed one of my 22" boss rims is bent in one area just a bit...not a good day I did dremel the door panels so the door locks and electric window switches set flush, the previous owner had them sticking out a bit

10-09-2011, 10:22 PM	#11
TJBrown Registered User Join Date: Jul 2011 Location: Shreveport La Posts: 73	Re: What did you get done 10/8/2011 edition Big Weekend. Worked on the truck this weekend out at my dads. Well, needless to say, she made it to the house today. 45 Minute drive to the house and it was awesome. Windows down and the Sliding Glass open. Radio doesn't work yet but i got to listen to the duals all the way to the house. __________________ 85 Silverado SWB

10-09-2011, 10:24 PM	#12
875.3CHEVY Registered User Join Date: Sep 2008 Location: spinawheel sc Posts: 108	Re: What did you get done 10/8/2011 edition made my bed pretty much useless Attached Images

10-09-2011, 10:36 PM	#13
68GMC_Dan Registered User Join Date: Mar 2011 Location: Bakersfield, Ca Posts: 18	Re: What did you get done 10/8/2011 edition Slapped on some rattle can to the Driving Project! Before: After:

10-09-2011, 10:42 PM	#14
sethv Registered User Join Date: May 2011 Location: Bradford, PA Posts: 395	Re: What did you get done 10/8/2011 edition That looks awesome! I love rattle can paint jobs. Today I played around with 4 lo. Got to the bottom of my driveway and just let off the clutch. The truck climbed up it (slowly. lol) but on its own. It was pretty cool. __________________ 1981 K10 Scottsdale 305 ci \| TH350 \| NP208 \| 60k miles

10-10-2011, 11:37 AM	#17
ghettoluxury Registered User Join Date: Apr 2009 Location: Waynesfield Ohio Posts: 1,991	Re: What did you get done 10/8/2011 edition Got the front calipers ground down on the Dana 60, now it will clear 15" rims. __________________ 1949 Five Window, 1973 Step Side, 2000 Z71

10-10-2011, 08:26 PM	#18
bigwheel15 Registered User Join Date: Feb 2010 Location: Fort Worth, TX Posts: 727	Re: What did you get done 10/8/2011 edition Painted my door panels and searched for plasti-dip but came up empty handed.



Register or Log In To remove these advertisements.

10-11-2011, 05:27 PM	#20
gofastbobby Registered User Join Date: Mar 2011 Location: Kalamazoo, MI Posts: 120	Re: What did you get done 10/8/2011 edition I made lemonade out of lemons this weekend. I took advantage of the great weather saturday and took the truck out for some junkyard cruising. Found a couple good parts trucks and a few nice boneyards that are off the beaten path. on the way back with a bed full of parts the transmission failed. 250 miles was all i got out of it. I parked it in a buddies back yard, started a campfire and drank his beer until he got home from work. Turned out to be a great weekend. __________________ '76 C10 "BIG10" SWB 454/400 Mostly Stock.

10-11-2011, 08:04 PM	#21
73gmc454 Registered User Join Date: Dec 2010 Location: louisville ohio Posts: 375	Re: What did you get done 10/8/2011 edition ran about 150 bucks worth of gas through the truck and had a great time doin it ! __________________ my build 77 gmc shortbed big block, http://67-72chevytrucks.com/vboard/s...d.php?t=438237

10-11-2011, 08:20 PM	#22
99-LS1-SS Registered User Join Date: Mar 2011 Location: Oak Ridge NC Posts: 957	Re: What did you get done 10/8/2011 edition Sorry, wrong place to post....

Register or Log In To remove these advertisements.