NM WTB No-spin Eaton locker - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DeadheadNM** · 10-09-2011, 10:35 PM

Decided to keep the HO52 so hoping to find a no-spin locker. Can anyone help me out?

Thanks, Pete

Ozark Tim · 10-10-2011, 03:40 PM

I have one I would sell but have no idea what ratio it serves.
Is there a number on it that verifies what it will work with??
I just have the locker unit itself, no 3rd member or carrier, no ring& pinion.
I thought it was for 4:10's but how to tell???

**DeadheadNM** · 10-10-2011, 07:18 PM

Tim, thanks for the reply. That's all I need is the locker itself. I suspect any HO52 locker will work regardless of ratio but that's just a guess. Let me post the question on the drivetrain forum and try to find out. I'll post back here when I know.

Is the locker in good shape?

**w314speed** · 10-10-2011, 08:10 PM

I have a complete H052/H072 from a 72 3/4 ton 4X4. It is a 4:10.
If you don't need, maybe someone else will see it in the thread. I need $300 plus shipping or local pick-up. Thanks, Dan

**DeadheadNM** · 10-10-2011, 08:17 PM

Thanks Dan. Just to clarify, is that a complete rear end or the no-spin locker?

**DeadheadNM** · 10-10-2011, 08:37 PM

Ozark Tim - Another member tells me the no-spin locker will work with any series gear ratio. Let me know how much you want for the locker when you can. Thanks.

**w314speed** · 10-10-2011, 09:02 PM

It's the pumpkin that loads into the front of the housing. Ring and pinion,posi unit, case and yoke. Thanks for clearing that up. Dan

**DeadheadNM** · 10-11-2011, 07:16 PM

Dan - Any chance you'd sell just the locker?

I imagine shipping costs on the whole pumpkin would be very pricey.

**PICKMUP** · 10-11-2011, 10:32 PM

It is usually a lot easier to install the whole center pumpkin with all the gears set & the patterns "run in"...if the gear ratio is right for you.

**DeadheadNM** · 10-11-2011, 10:48 PM

Quote:

Originally Posted by PICKMUP

It is usually a lot easier to install the whole center pumpkin with all the gears set & the patterns "run in"...if the gear ratio is right for you.

Frank, I believe it. I hope to save some $ over outfitting the Eaton with a 14 bolt diff and axles. I'd like to have Dan's pumpkin but considering the potential shipping cost of such a heavy piece of steel I suspect I wouldn't save much. Maybe I'm wrong.

*RUSHNBOBO* · 10-11-2011, 11:09 PM

Quote:

Originally Posted by DeadheadNM

Frank, I believe it. I hope to save some $ over outfitting the Eaton with a 14 bolt diff and axles. I'd like to have Dan's pumpkin but considering the potential shipping cost of such a heavy piece of steel I suspect I wouldn't save much. Maybe I'm wrong.

I want to do the same thing with my 4.56 HO72 pumpkin...I've been trying to do some research to see if a Lockright mini type locker will work with the Eaton/14 bolt hybrid....it would have to fit in the Eaton carrier or use a 14 bolt open carrier, haven't seen one yet but don't see why it wouldn't work.

Did find some awesome disc brake brackets which are cut just for Eatons and need no spacers of any kind .....they use '77 14 bolt 3/4 ton rotors and calipers.

HeavyMetalChevy · 10-12-2011, 09:17 AM

I just want a limited slip/posi trac setup for my eaton52...Any suggestions??? I think its 4.11 gear but can get numbers they are worn too bad... I know the ring gear has 41 teeth though but cant have the ration without the other gear number and I dont really feel like pulling it out at the moment..lol

Ozark Tim · 10-12-2011, 10:47 AM

Sent you a p.m.

**DeadheadNM** · 10-12-2011, 08:41 PM

Rushnbobo - Where did you get the disk brake brackets and what calipers did you go with? I was planning on using a kit from Blackbirds Custom Trucks: http://www.blackbirdscustomtrucks.com/index.html

Tim - Thanks for the PM

*RUSHNBOBO* · 10-12-2011, 09:34 PM

Quote:

Originally Posted by DeadheadNM

Rushnbobo - Where did you get the disk brake brackets and what calipers did you go with? I was planning on using a kit from Blackbirds Custom Trucks: http://www.blackbirdscustomtrucks.com/index.html

Tim - Thanks for the PM

http://www.ruffstuffspecialties.com/...g/EHO5272.html

**DeadheadNM** · 10-12-2011, 09:39 PM

Nice! Thank you...

*RUSHNBOBO* · 10-12-2011, 09:54 PM

Quote:

Originally Posted by DeadheadNM

Nice! Thank you...

no problem....

Ozark Tim · 10-17-2011, 02:52 PM

Here are the pictures

**DeadheadNM** · 10-17-2011, 07:28 PM

Tim- From what I can tell that's a fine piece of steel. Do you know if I need the side springs to install this? Do you have these too? (pic w springs is borrowed from an old board post). I want to buy it just making sure I have everything I'm going to need for the install.

Thanks for the pics. Pete

Ozark Tim · 10-18-2011, 08:44 AM

I know there are springs or spring inside which is why the long bolt and nut are on it to keep it from flying into 3 or more pieces. If you need me to dissasemble and take more pictures just let me know.

**DeadheadNM** · 10-18-2011, 09:47 AM

Quote:

Originally Posted by Ozark Tim

I know there are springs or spring inside which is why the long bolt and nut are on it to keep it from flying into 3 or more pieces. If you need me to dissasemble and take more pictures just let me know.

That's good enough for me. I'll take it. Thanks Tim. Please send PM with payment details when possible.

Ozark Tim · 10-18-2011, 10:05 AM

shot you a pm

Beat68CST · 01-29-2012, 05:41 PM

Any chance any of you know have one still?

I'd like to get one right now since I just got my third member from another board member and the spider gears were broke, which I knew, I'd just like to find a locker before I put it back together.

10-09-2011, 10:35 PM	#1
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,424	WTB No-spin Eaton locker Decided to keep the HO52 so hoping to find a no-spin locker. Can anyone help me out? Thanks, Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

10-10-2011, 03:40 PM	#2
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: WTB No-spin Eaton locker I have one I would sell but have no idea what ratio it serves. Is there a number on it that verifies what it will work with?? I just have the locker unit itself, no 3rd member or carrier, no ring& pinion. I thought it was for 4:10's but how to tell???

10-10-2011, 07:18 PM	#3
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,424	Re: WTB No-spin Eaton locker Tim, thanks for the reply. That's all I need is the locker itself. I suspect any HO52 locker will work regardless of ratio but that's just a guess. Let me post the question on the drivetrain forum and try to find out. I'll post back here when I know. Is the locker in good shape? __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland Last edited by DeadheadNM; 10-10-2011 at 07:32 PM. Reason: text error

10-10-2011, 08:10 PM	#4
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,314	Re: WTB No-spin Eaton locker I have a complete H052/H072 from a 72 3/4 ton 4X4. It is a 4:10. If you don't need, maybe someone else will see it in the thread. I need $300 plus shipping or local pick-up. Thanks, Dan

10-10-2011, 08:17 PM	#5
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,424	Re: WTB No-spin Eaton locker Thanks Dan. Just to clarify, is that a complete rear end or the no-spin locker? __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

10-10-2011, 08:37 PM	#6
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,424	Re: WTB No-spin Eaton locker Ozark Tim - Another member tells me the no-spin locker will work with any series gear ratio. Let me know how much you want for the locker when you can. Thanks. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

10-10-2011, 09:02 PM	#7
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,314	Re: WTB No-spin Eaton locker It's the pumpkin that loads into the front of the housing. Ring and pinion,posi unit, case and yoke. Thanks for clearing that up. Dan

10-11-2011, 07:16 PM	#8
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,424	Re: WTB No-spin Eaton locker Dan - Any chance you'd sell just the locker? I imagine shipping costs on the whole pumpkin would be very pricey. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

10-11-2011, 10:32 PM	#9
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,139	Re: WTB No-spin Eaton locker It is usually a lot easier to install the whole center pumpkin with all the gears set & the patterns "run in"...if the gear ratio is right for you. __________________ Email: frankeham@comcast.net Phone: 360-956-7170

10-12-2011, 09:17 AM	#12
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: WTB No-spin Eaton locker I just want a limited slip/posi trac setup for my eaton52...Any suggestions??? I think its 4.11 gear but can get numbers they are worn too bad... I know the ring gear has 41 teeth though but cant have the ration without the other gear number and I dont really feel like pulling it out at the moment..lol __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

10-12-2011, 10:47 AM	#13
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: WTB No-spin Eaton locker Sent you a p.m.

10-12-2011, 08:41 PM	#14
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,424	Re: WTB No-spin Eaton locker Rushnbobo - Where did you get the disk brake brackets and what calipers did you go with? I was planning on using a kit from Blackbirds Custom Trucks: http://www.blackbirdscustomtrucks.com/index.html Tim - Thanks for the PM __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

10-12-2011, 09:39 PM	#16
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,424	Re: WTB No-spin Eaton locker Nice! Thank you... __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

10-17-2011, 02:52 PM	#18
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: WTB No-spin Eaton locker Here are the pictures Attached Images

10-17-2011, 07:28 PM	#19
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,424	Re: WTB No-spin Eaton locker Tim- From what I can tell that's a fine piece of steel. Do you know if I need the side springs to install this? Do you have these too? (pic w springs is borrowed from an old board post). I want to buy it just making sure I have everything I'm going to need for the install. Thanks for the pics. Pete Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland



Register or Log In To remove these advertisements.

10-18-2011, 08:44 AM	#20
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: WTB No-spin Eaton locker I know there are springs or spring inside which is why the long bolt and nut are on it to keep it from flying into 3 or more pieces. If you need me to dissasemble and take more pictures just let me know.

10-18-2011, 10:05 AM	#22
Ozark Tim Registered User Join Date: Aug 2004 Location: Oakville, MO Posts: 1,018	Re: WTB No-spin Eaton locker shot you a pm

01-29-2012, 05:41 PM	#23
Beat68CST Registered User Join Date: Oct 2010 Location: Buckeye Arizona Posts: 470	Re: WTB No-spin Eaton locker Any chance any of you know have one still? I'd like to get one right now since I just got my third member from another board member and the spider gears were broke, which I knew, I'd just like to find a locker before I put it back together.

Register or Log In To remove these advertisements.