Gas gauge not reading right??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

63CHEVY62GMC · 10-27-2011, 09:50 PM

i just filled my 63 chevy truck up and the gas gauge still reads that a quarter tank is left. i checked the ground on the back of the cab behind the seat and it was ok. help please?

**ChiefRocka** · 10-27-2011, 09:59 PM

Pull the wire off the terminal, and touch it directly to ground, then check guage...with key on of course

63CHEVY62GMC · 10-27-2011, 10:01 PM

Quote:

Originally Posted by ChiefRocka

Pull the wire off the terminal, and touch it directly to ground, then check guage...with key on of course

ok ill try that in auto tech tomarrow. thank you.

**MisterC** · 10-28-2011, 12:06 AM

I recently replaced my sending unit and it worked great. The first time that I filled my tank, it was only showing a quarter of a tank. Turns out that the sending unit I installed had a pinhole in the float. I purchased yet another new sending unit, installed it and now it works great.

Moral of the story is that sometime you get bad sending units.

63CHEVY62GMC · 10-28-2011, 08:09 AM

Quote:

Originally Posted by MisterC

I recently replaced my sending unit and it worked great. The first time that I filled my tank, it was only showing a quarter of a tank. Turns out that the sending unit I installed had a pinhole in the float. I purchased yet another new sending unit, installed it and now it works great.

Moral of the story is that sometime you get bad sending units.

thanks i will look into that. that's what my dad said it might be (a hole it the float).

10-27-2011, 09:50 PM	#1
63CHEVY62GMC Registered User Join Date: Oct 2011 Location: forest city NC Posts: 84	Gas gauge not reading right??? i just filled my 63 chevy truck up and the gas gauge still reads that a quarter tank is left. i checked the ground on the back of the cab behind the seat and it was ok. help please?

10-27-2011, 09:59 PM	#2
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: Gas gauge not reading right??? Pull the wire off the terminal, and touch it directly to ground, then check guage...with key on of course __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

10-28-2011, 12:06 AM	#4
MisterC Senior Member Join Date: Sep 2011 Location: Hanford, CA Posts: 1,027	Re: Gas gauge not reading right??? I recently replaced my sending unit and it worked great. The first time that I filled my tank, it was only showing a quarter of a tank. Turns out that the sending unit I installed had a pinhole in the float. I purchased yet another new sending unit, installed it and now it works great. Moral of the story is that sometime you get bad sending units. __________________ Poor and content is Rich...and Rich enough! - William Shakespeare 1966 C10 Custom Cab "Luigi" Big Window - SWB Fleetside 350 V-8 - Powerglide My not so much a build thread as a "Slow Progression Thread":http://67-72chevytrucks.com/vboard/s...d.php?t=486894



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.