Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
11-16-2011, 12:48 PM | #1 |
Registered User
Join Date: Mar 2010
Location: Monroe, Mi
Posts: 3
|
what should i look for and.....
What should I look for rust wise, and what kind of price would you put on it if it end up clean?
Theres the question now heres the info. From what I can see its a '60 or '61 chevy by the front end. Its sitting off the road about 50 yards in a barn for years. I keep driving by drooling. They owner of the house has put the house up for rent. My wife wants to look at the house and ask them about buying or rent to own and I would like to roll the truck into the conversation. From the road I can tell it has good glass the front sheet metal, fenders and hood, appear to be rust free. Its a real faded yellow. I have been driving past it every day for at least 6 years now. It has not moved an inch. What appears to be a piece of wood from the barn fell against it in a storm we had in spring. It was never removed from the truck. It looks like a thin plank about 6 ft tall with a broken end. I would assume its a piece of the wall of the barn. most likely put a dent in it. I found this picture on here and its the same color as the truck in this picture (truck on the left): It has this front end: |
11-16-2011, 01:42 PM | #2 |
meowMEOWmeowMEOW
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
|
Re: what should i look for and.....
biggest places to look for rust are;
front lip of the hood (one of the worse and hardest to repair) lower rear of fenders (by the door crease) door bottoms/inside door bottoms floor it also helps to check the cab and bed mounts to make sure they aren't broken, if the cab or bed sat on broken mounts a while, you'll notice that panel gaps will take some work to get straight. What engine and trans does it have? Is it stock/original etc? More pics might help. Also, does it sit like that second truck you posted? That one looks either like a frame swapped/lifted truck, or a NAPCO conversion 4wd. That would change the price.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
|
11-16-2011, 02:02 PM | #3 |
Registered User
Join Date: Jan 2009
Location: bean station tennessee
Posts: 398
|
Re: what should i look for and.....
rust wise everywhere because these trucks are notorious for rust.over the windshield inside and out,cab corners,rocker panels,kick panels,a and b pillars,cab supports,firewall panel,up and under the dash on both sides(most of these trucks i've seen leak under the dash when in a heavy rain),lower rear part of the back cab panel in between the cab and bed,front of hood inside and out,rear corners of the hood inside and out,inner front fenders,front fenders,radiator support where it mounts to frame,lower part of tailgate,bedsides around wheel well panels inside and out,stake pocket area on bedsides,tail lamp panels on fleetsides,lip where wood mounts to bedsides,and check the frame out also.good luck on the truck.
|
11-16-2011, 02:21 PM | #4 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: what should i look for and.....
Make sure to run the VIN for the correct year. Many trucks have different hoods or grills on them. The winshield will only give you the 60-63 or 64-66 cab years.
|
11-17-2011, 12:58 AM | #5 | |
meowMEOWmeowMEOW
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
|
Re: what should i look for and.....
Quote:
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
|
|
11-17-2011, 01:48 PM | #6 | |
Registered User
Join Date: Mar 2010
Location: Monroe, Mi
Posts: 3
|
Re: what should i look for and.....
Quote:
|
|
11-17-2011, 02:31 PM | #7 |
meowMEOWmeowMEOW
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
|
Re: what should i look for and.....
please do, might help a bit.
There is also a chance it could be a c20 or c30, as the sheetmetal would be the same.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
|
11-17-2011, 04:28 PM | #8 |
Registered User
Join Date: Aug 2010
Location: Burbank CA
Posts: 3,055
|
Re: what should i look for and.....
As far as rust goes, I would be more concerned with areas that are not removable and replaceable. Good parts are cheap compared to good labor. If you see a scary amount of cab rust, just forget about it and move on to the next truck. Can you tell I live in the Southwest?
|
11-17-2011, 08:29 PM | #9 | |
Registered User
Join Date: Jan 2009
Location: bean station tennessee
Posts: 398
|
Re: what should i look for and.....
Quote:
|
|
11-17-2011, 11:05 PM | #10 |
meowMEOWmeowMEOW
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
|
Re: what should i look for and.....
^i got lucky, even though my truck sat in florida, the sand in the quarter panels did a nice job wickking moisture away.
I won't disagree with you tho; I've been down your way and seen that heavy dirt/mud get EVERYWHERE on my truck.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
|
11-18-2011, 10:52 AM | #11 |
Registered User
Join Date: Mar 2010
Location: Monroe, Mi
Posts: 3
|
Re: what should i look for and.....
here are the pics as promised. i should have pulled the camera out sooner. it appears to have a fleet side bed and that is what the wood is leaning against. I would also like the point out that that plate on the front bumper was only made for 1976. they were allowed to be used in 77 and 78 then had to be removed.
From the road: Zoomed all the way in: "Red and blue base, white numbers/letters. All passenger plates were aluminum. Two license plates (front and rear) were required. Stickers were issued for 1977 and 1978." Last edited by squeak003; 11-18-2011 at 10:59 AM. |
11-18-2011, 11:37 AM | #12 |
Registered User
Join Date: Nov 2009
Location: Galt, Calif
Posts: 2,437
|
Re: what should i look for and.....
Hell stop in and ask, all he can do is say no....Str8axle bought his truck in New Jersey and he has`nt any rust, all original truck. Sometimes you get lucky.
__________________
`64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip |
11-18-2011, 01:38 PM | #13 |
meowMEOWmeowMEOW
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
|
Re: what should i look for and.....
def looks like a 60-61 to me. Paint color seems original (i don't know who would re paint a car that color lol).
From the distance the hood looks to be in ok shape. I can see a couple of maybe softball size dents on the side where the wood is. The ride height looks stock, and I would assume it still has an engine since the springs aren't unloaded. I can't tell if the grill insert is original. If its been sitting there for a while, just talk to the guy. You may be able to find out when it last ran etc. Heck if the tires hold air, and the drums aren't seized or leaking, you could pull her right out and try to run it. A little penetrating oil, starting fluid and plugs can put a smile on your face if she was cared for before she sat. YOU NEED TO SAVE THAT POOR TRUCKS LIFE!
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
|
Bookmarks |
|
|