Where to Buy Vacuum Control Switch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

coop34 · 11-30-2011, 01:54 AM

Anyone know where I can buy a vacuum control switch that attaches to the rear of an a/c heater control assembly? And also, the little round clips that connect the sliders to the levers? Thanks.

coop34 · 11-30-2011, 01:48 PM

Here is a picture of what I need:

coop34 · 11-30-2011, 04:06 PM

Do I have to buy the complete a/c assembly just to get the vacuum switch?

**leddzepp** · 11-30-2011, 04:20 PM

Go to a pick n pull yard. I see A/C controls there all the time. You can pull this switch off of one.

coop34 · 11-30-2011, 05:46 PM

Thanks for the suggestion Zepp. Not many good pick n pulls where I'm from though. I was hoping to find a vendor that sells them. Guess, I'm outta luck.

PT'S 70 CST · 11-30-2011, 05:51 PM

Call GmcPaul, Pickmup (Frank) 360-956-7170 or (Wes) Classicheartbeat 888-338-2502 and ask one of these guys where to find one. One of them is bound to know.

PT

coop34 · 11-30-2011, 06:02 PM

Good idea PTS, but I just called Wes and he says that they aren't sold separetly. I'd have to buy the whole darn a/c control assembly

PT'S 70 CST · 11-30-2011, 06:11 PM

I will do some searching for you and see if I can find you one. You may have to buy a used one and hope it works or buy a whole used unit with a broken leaver cheap and get one that way. You can find them on ebay. I will look and see if I have one but it will be a few days, I am on 12 hr. nights for the next few nights.

PT

into69z · 11-30-2011, 06:47 PM

i have one and I will look for it in the morning-what's wrong with yours?

coop34 · 11-30-2011, 07:03 PM

What's wrong with mine is it's missing!

I recently converted my non a/c truck to stock a/c and the control unit I bought was missing one. If you can find one, that would help me out a ton, since it appears they are not sold separately.

into69z · 12-01-2011, 11:46 AM

Coop-I have what you need and will send it to you, just shoot me an address.

I tried to take a few pictures but the camera( or operator) just can't focus for what is needed. I have included the little screws that hold it in place. The only thing you will need to make everything complete is a plastic "collar" that goes on the pin that rests in the grove on the control arm. The pin is on the backside of the valve(opposite the side with the part number in your picture) and I made one for my truck out of something I had in my junkbox. The "collar" or plastic sleeve takes up the slack from the pin to the groove in the control arm so make it just tight enough for everything to move freely-lube with white grease. Hope it helps! Steve

**LockDoc** · 12-01-2011, 12:01 PM

-
Nice gesture... This is a great place to be a part of...

LockDoc

coop34 · 12-01-2011, 12:55 PM

Absolutely a nice gesture! I will be sure to pass the kindness along when the opportunity presents itself. Thanks Steve! I'll pm you my address.

11-30-2011, 01:54 AM	#1
coop34 Registered User Join Date: Sep 2009 Location: Visalia, CA Posts: 247	Where to Buy Vacuum Control Switch Anyone know where I can buy a vacuum control switch that attaches to the rear of an a/c heater control assembly? And also, the little round clips that connect the sliders to the levers? Thanks.

11-30-2011, 01:48 PM	#2
coop34 Registered User Join Date: Sep 2009 Location: Visalia, CA Posts: 247	Re: Where to Buy Vacuum Control Switch Here is a picture of what I need: Attached Images

11-30-2011, 04:06 PM	#3
coop34 Registered User Join Date: Sep 2009 Location: Visalia, CA Posts: 247	Re: Where to Buy Vacuum Control Switch Do I have to buy the complete a/c assembly just to get the vacuum switch?

11-30-2011, 04:20 PM	#4
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 20,018	Re: Where to Buy Vacuum Control Switch Go to a pick n pull yard. I see A/C controls there all the time. You can pull this switch off of one. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man RIP FleetsidePaul

11-30-2011, 05:46 PM	#5
coop34 Registered User Join Date: Sep 2009 Location: Visalia, CA Posts: 247	Re: Where to Buy Vacuum Control Switch Thanks for the suggestion Zepp. Not many good pick n pulls where I'm from though. I was hoping to find a vendor that sells them. Guess, I'm outta luck.

11-30-2011, 05:51 PM	#6
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Where to Buy Vacuum Control Switch Call GmcPaul, Pickmup (Frank) 360-956-7170 or (Wes) Classicheartbeat 888-338-2502 and ask one of these guys where to find one. One of them is bound to know. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

11-30-2011, 06:02 PM	#7
coop34 Registered User Join Date: Sep 2009 Location: Visalia, CA Posts: 247	Re: Where to Buy Vacuum Control Switch Good idea PTS, but I just called Wes and he says that they aren't sold separetly. I'd have to buy the whole darn a/c control assembly

11-30-2011, 06:11 PM	#8
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: Where to Buy Vacuum Control Switch I will do some searching for you and see if I can find you one. You may have to buy a used one and hope it works or buy a whole used unit with a broken leaver cheap and get one that way. You can find them on ebay. I will look and see if I have one but it will be a few days, I am on 12 hr. nights for the next few nights. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

11-30-2011, 06:47 PM	#9
into69z "brand new second-hand" Join Date: Feb 2007 Location: White House, Tennessee Posts: 526	Re: Where to Buy Vacuum Control Switch i have one and I will look for it in the morning-what's wrong with yours? __________________ Steve 69 3/4t custom camper tilt,am/fm,speed warning,air gauge,buddy buckets,aux battery, big block,p/s,p/b,a/c 67 Camaro 96 Impala ss-sold 04 hybrid Honda-saving gas for the blue truck!:b69:

11-30-2011, 07:03 PM	#10
coop34 Registered User Join Date: Sep 2009 Location: Visalia, CA Posts: 247	Re: Where to Buy Vacuum Control Switch What's wrong with mine is it's missing! I recently converted my non a/c truck to stock a/c and the control unit I bought was missing one. If you can find one, that would help me out a ton, since it appears they are not sold separately.

12-01-2011, 11:46 AM	#11
into69z "brand new second-hand" Join Date: Feb 2007 Location: White House, Tennessee Posts: 526	Re: Where to Buy Vacuum Control Switch Coop-I have what you need and will send it to you, just shoot me an address. I tried to take a few pictures but the camera( or operator) just can't focus for what is needed. I have included the little screws that hold it in place. The only thing you will need to make everything complete is a plastic "collar" that goes on the pin that rests in the grove on the control arm. The pin is on the backside of the valve(opposite the side with the part number in your picture) and I made one for my truck out of something I had in my junkbox. The "collar" or plastic sleeve takes up the slack from the pin to the groove in the control arm so make it just tight enough for everything to move freely-lube with white grease. Hope it helps! Steve __________________ Steve 69 3/4t custom camper tilt,am/fm,speed warning,air gauge,buddy buckets,aux battery, big block,p/s,p/b,a/c 67 Camaro 96 Impala ss-sold 04 hybrid Honda-saving gas for the blue truck!:b69:

12-01-2011, 12:01 PM	#12
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,633	Re: Where to Buy Vacuum Control Switch - Nice gesture... This is a great place to be a part of... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

12-01-2011, 12:55 PM	#13
coop34 Registered User Join Date: Sep 2009 Location: Visalia, CA Posts: 247	Re: Where to Buy Vacuum Control Switch Absolutely a nice gesture! I will be sure to pass the kindness along when the opportunity presents itself. Thanks Steve! I'll pm you my address.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.