Brake lines. What is wrong with this picture - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gysgtc · 12-03-2011, 07:56 AM

From inline tube. Does this look right? Should I bend the passenger side line so it fits? This is on a 67 c10. I should have listened and bought else where

sporty1200xlc · 12-03-2011, 08:15 AM

Im no help here. Just throwing this out there. The middle one isnt turned backwards is it.

**lolife99** · 12-03-2011, 08:29 AM

Bend it.

gysgtc · 12-03-2011, 08:37 AM

Thanks Keith. You always have the answer. The kit I bought also runs the lines on the outside of the frame. This makes the "T" real close to the A arm.

**lolife99** · 12-03-2011, 08:44 AM

I've found that most of these kits require a little bit of "tweaking".
You should be able to "twist" the right side brake line to make it work.
Take your time and don't kink the lines.

gysgtc · 12-03-2011, 10:37 AM

Keith, thanks for the help. I am taking pictures as I go in case others need to know which line is which. I just held the rear lines up to the rear axle and those need to be bent too.
Wayne

ItsRandy · 12-03-2011, 09:12 PM

Quote:

Originally Posted by gysgtc

From inline tube. Does this look right? Should I bend the passenger side line so it fits? This is on a 67 c10. I should have listened and bought else where

Your's fit better than mine did (Inline tubes)!

PanelDeland · 12-03-2011, 09:35 PM

Maybe I'm glad they just dropped my order.I waiited almost 6 months and 3 phone calls before cancelling.Looks like the ones I rebent are closer than that.

pritch · 12-03-2011, 09:37 PM

Mine came the same way. I altered things to fit, but I'm not too happy with the look. You can kinda see what I did in this picture:

The part I don't like is the line that comes across the cross member, which I don't have a good picture of.

Sport/Truck · 12-04-2011, 02:02 PM

Inline Tube has the worst costumer service, if you try to inform them that something is wrong they'll just try to blame your truck not being correct.

I had a similar problem with their SS transmission cooler lines. I tried a few other brands but the Inline Tube was the best product quality - just had to make them fit.

z10kl · 12-04-2011, 03:44 PM

I had to twist one of mine 180 degrees. It's like they bent one end and then the other end. With no attention to the clocking of the ends to each other. I had to drive over to a buddies to look at his project truck just to figure out what the problem was.

mightymouse · 12-04-2011, 03:53 PM

guess i got lucky for once . my inline tubeing fit no problems anywhere

blkcorvair · 12-04-2011, 07:43 PM

All mine from inline tube fit excellent (Standard Steel Lines) with the exception of the Fuel line from the pump to carb on my 6. Was just the wrong line altogether, But I made my own and was happy never the less

12-03-2011, 07:56 AM	#1
gysgtc Registered User Join Date: Apr 2010 Location: Sutton, WV Posts: 340	Brake lines. What is wrong with this picture From inline tube. Does this look right? Should I bend the passenger side line so it fits? This is on a 67 c10. I should have listened and bought else where Attached Images

12-03-2011, 08:15 AM	#2
sporty1200xlc Registered User Join Date: Sep 2010 Location: Richmond IN Posts: 50	Re: Brake lines. What is wrong with this picture Im no help here. Just throwing this out there. The middle one isnt turned backwards is it.

12-03-2011, 08:29 AM	#3
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Brake lines. What is wrong with this picture Bend it. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-03-2011, 08:37 AM	#4
gysgtc Registered User Join Date: Apr 2010 Location: Sutton, WV Posts: 340	Re: Brake lines. What is wrong with this picture Thanks Keith. You always have the answer. The kit I bought also runs the lines on the outside of the frame. This makes the "T" real close to the A arm.

12-03-2011, 08:44 AM	#5
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Brake lines. What is wrong with this picture I've found that most of these kits require a little bit of "tweaking". You should be able to "twist" the right side brake line to make it work. Take your time and don't kink the lines. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-03-2011, 10:37 AM	#6
gysgtc Registered User Join Date: Apr 2010 Location: Sutton, WV Posts: 340	Re: Brake lines. What is wrong with this picture Keith, thanks for the help. I am taking pictures as I go in case others need to know which line is which. I just held the rear lines up to the rear axle and those need to be bent too. Wayne

12-03-2011, 09:35 PM	#8
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: Brake lines. What is wrong with this picture Maybe I'm glad they just dropped my order.I waiited almost 6 months and 3 phone calls before cancelling.Looks like the ones I rebent are closer than that. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

12-03-2011, 09:37 PM	#9
pritch Registered User Join Date: Mar 2004 Location: Hoytsville, Utah Posts: 3,365	Re: Brake lines. What is wrong with this picture Mine came the same way. I altered things to fit, but I'm not too happy with the look. You can kinda see what I did in this picture: The part I don't like is the line that comes across the cross member, which I don't have a good picture of. __________________ '68 Panel Project Boogie Chillin' '68 C-10 Ol' Green

12-04-2011, 02:02 PM	#10
Sport/Truck Sierra Grande Club Join Date: Jan 2007 Location: New Mexico USA Posts: 2,433	Re: Brake lines. What is wrong with this picture Inline Tube has the worst costumer service, if you try to inform them that something is wrong they'll just try to blame your truck not being correct. I had a similar problem with their SS transmission cooler lines. I tried a few other brands but the Inline Tube was the best product quality - just had to make them fit. __________________ 1971 GMC Sierra Grande, 1/2 ton short wide, original 4 bolt 010 020 block & heads. (matching #'s). 383 stroker, SMI q jet 750 cfm, Lunati Voodoo 60102 cam, Scorpion roller rockers, Spin Tech pro street mufflers with X pipe.

12-04-2011, 03:44 PM	#11
z10kl Registered User Join Date: Oct 2006 Location: denver nc Posts: 97	Re: Brake lines. What is wrong with this picture I had to twist one of mine 180 degrees. It's like they bent one end and then the other end. With no attention to the clocking of the ends to each other. I had to drive over to a buddies to look at his project truck just to figure out what the problem was. __________________ 70 CST Bunch of old Camaros

12-04-2011, 03:53 PM	#12
mightymouse Registered User Join Date: Feb 2011 Location: Crowley TX Posts: 979	Re: Brake lines. What is wrong with this picture guess i got lucky for once . my inline tubeing fit no problems anywhere

12-04-2011, 07:43 PM	#13
blkcorvair Registered User Join Date: May 2011 Location: Long Island NY Posts: 787	Re: Brake lines. What is wrong with this picture All mine from inline tube fit excellent (Standard Steel Lines) with the exception of the Fuel line from the pump to carb on my 6. Was just the wrong line altogether, But I made my own and was happy never the less



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.