Scrapes a bit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cochino12 · 08-27-2003, 09:38 AM

I've got a 5" drop in front and the control arm or maybe it's an A-arm scrapes sometimes. Obviously its not a good thing but HOW BAD is it when it rubs. Other than marking up the metal is something else gonna break? I really don't want to mess anything up. Also do I need to shave some of the front bumstop off or is it ok the way it is? Thanks for the help

phantom dually · 08-27-2003, 02:35 PM

I would shave the metal from the arm upwards as much as possible. Then take and use some flatstock to reinforce it. This will make it stronger and give you more clearance. I have a set of factory lower arms if you are interested.

loweredd · 08-28-2003, 07:11 PM

hmmmmm......how much?

I could beef them up and make them into skidplates!

phantom dually · 08-28-2003, 07:55 PM

Like $20 plus shipping from 40216. Let me know

08-27-2003, 09:38 AM	#1
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	Scrapes a bit I've got a 5" drop in front and the control arm or maybe it's an A-arm scrapes sometimes. Obviously its not a good thing but HOW BAD is it when it rubs. Other than marking up the metal is something else gonna break? I really don't want to mess anything up. Also do I need to shave some of the front bumstop off or is it ok the way it is? Thanks for the help __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually Last edited by cochino12; 08-27-2003 at 09:44 AM.

08-27-2003, 02:35 PM	#2
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	I would shave the metal from the arm upwards as much as possible. Then take and use some flatstock to reinforce it. This will make it stronger and give you more clearance. I have a set of factory lower arms if you are interested. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

08-28-2003, 07:55 PM	#4
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Like $20 plus shipping from 40216. Let me know __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

08-28-2003, 07:11 PM	#3
loweredd www.loweredd.com Join Date: Aug 2002 Location: Struble IA Posts: 808	hmmmmm......how much? I could beef them up and make them into skidplates!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.