I dont no what I am building haha - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dinos63 · 01-05-2012, 12:22 AM

dang!! we have to wait till the weekend to see pics

**superflysteiny** · 01-05-2012, 11:52 AM

Sorry guys I am collecting parts. Just ordered the patch panels yesterday. Mario and I talked yesterday we are going to try to keep the budget at 15000k. That will be tough but we will see. This truck will be satin. I have never had a satin truck. It will be tough not to make it base clear but if I want to stay in the budget this is the way it has to be. HA HA it is going to be tough

I just keep

because this is really going to be tough. Mario said thats why he is here to keep me in line.

PBFAB.COM · 01-05-2012, 12:06 PM

Quote:

Originally Posted by superflysteiny

Sorry guys I am collecting parts. Just ordered the patch panels yesterday. Mario and I talked yesterday we are going to try to keep the budget at 15000k. That will be tough but we will see. This truck will be satin. I have never had a satin truck. It will be tough not to make it base clear but if I want to stay in the budget this is the way it has to be. HA HA it is going to be tough

I just keep

because this is really going to be tough. Mario said thats why he is here to keep me in line.

I say do all you can to keep it under budget. That's part of the fun! It will be cool to see you finish within the budget. It will also force you to find "deals" and get creative where necessary.

**superflysteiny** · 01-05-2012, 12:06 PM

I just wanted to show you guys how clean this door is. I am running the one ton grill. I have been itching to put this grill on something

Delmo · 01-05-2012, 12:11 PM

Those grilles are so sick.

**67cheby** · 01-05-2012, 12:32 PM

yep that is a SUPER COOL grill, in the 15000 are you counting the cost of the body, frame , wheels and tires , engine ?? unless you are getting tons of stuff sponsored that budget blows my mind !

**superflysteiny** · 01-05-2012, 12:35 PM

Quote:

Originally Posted by Delmo

Those grilles are so sick.

Could not agree more. Love these grills but they are tough to find.
Posted via Mobile Device

**superflysteiny** · 01-05-2012, 12:36 PM

Quote:

Originally Posted by porterbuilt

I say do all you can to keep it under budget. That's part of the fun! It will be cool to see you finish within the budget. It will also force you to find "deals" and get creative where necessary.

For sure it will take a ton of work but will be different. Should be fun too
Posted via Mobile Device

**superflysteiny** · 01-05-2012, 12:42 PM

Quote:

Originally Posted by 67cheby

yep that is a SUPER COOL grill, in the 15000 are you counting the cost of the body, frame , wheels and tires , engine ?? unless you are getting tons of stuff sponsored that budget blows my mind !

Have motor trans already. Frame 4000, have wildwood rear brakes already, 3800 wheels tires 1000. Paint sponsored but body panels and parts 500. Interior 1000. Body prep and body work 2500. I think it can be done. I wonder what it will be worth finished.
Posted via Mobile Device

aggie91 · 01-08-2012, 03:46 PM

Just had some time to read and catch up on your new project. I am real interested and amazed at your past work. A buddy of mine is doing a Burb also, and I will be helping him with the frame/suspension. He is leaning towards the Scott's set up at this time, he is just hung up on running 24x14 wheels with the super wide pirelli tire out back...

When do we get to see the top off?

**superflysteiny** · 01-08-2012, 08:01 PM

Should be really cool if he goes with the big rear wheels
Posted via Mobile Device

70-Shorty · 01-08-2012, 08:12 PM

i would think it would be way cool to shorten the thing as if Chevy made a two-door blazer in that body style....just an early model roadster truck!
Tim

stickelspeed · 01-08-2012, 09:04 PM

I couldn't picture what this would look like .. so I took a crack (hack) at rendering one option for it.. tried to keep it low budget based on your build description..

**67cheby** · 01-08-2012, 09:07 PM

That is sick
Posted via Mobile Device

64shortc10 · 01-08-2012, 09:38 PM

Quote:

Originally Posted by stickelspeed

I couldn't picture what this would look like .. so I took a crack (hack) at rendering one option for it.. tried to keep it low budget based on your build description..

That looks SICK! I say that's perfect, but that doesnt look budget. I see lots of $$$$$$ to build that. But say do it! I also was wondering if you could post more pics of pops porterbuilt build of the finished inside of the bed? Or do I have to wait for it to come out in street trucks? Keep them pics coming!
Tony from Norcal
Posted via Mobile Device

jbclassix · 01-09-2012, 12:35 AM

Quote:

Originally Posted by stickelspeed

I couldn't picture what this would look like .. so I took a crack (hack) at rendering one option for it.. tried to keep it low budget based on your build description..

What number is "low-budget" for Superfly?

**superflysteiny** · 01-09-2012, 01:30 AM

Quote:

Originally Posted by stickelspeed

I couldn't picture what this would look like .. so I took a crack (hack) at rendering one option for it.. tried to keep it low budget based on your build description..

Thanks for doing that I love it. That really helps me too. This is going to be so cool
Posted via Mobile Device

Lolyin58 · 01-09-2012, 01:43 AM

Eric, that is totally you. Time to kick it up a notch!!!!!!!!!!!!!

**superflysteiny** · 01-09-2012, 10:52 AM

I did not get anything done on the truck this weekend because I am building a frame jig for this truck. I plan on doing a ton of welding on this truck frame so I want to make sure it does not change shape from all the heat.
Posted via Mobile Device

**superflysteiny** · 01-09-2012, 10:55 AM

Quote:

Originally Posted by stickelspeed

I couldn't picture what this would look like .. so I took a crack (hack) at rendering one option for it.. tried to keep it low budget based on your build description..

Did you rake the window frame on the rendering. It looks like you did
Posted via Mobile Device

stickelspeed · 01-09-2012, 11:36 AM

Quote:

Originally Posted by superflysteiny

Did you rake the window frame on the rendering. It looks like you did
Posted via Mobile Device

ya... I set the windshield back a fair amount.

here is the original photo I used as a starting point..

and here is an overlay so you can see the amount of rake..

with 3 school aged kids ... you'd think I could find a stray protractor to measure the sweep... but.. sorry can't find one.

I'd say it's laid back approx. 15 degrees maybe.. not sure.

**superflysteiny** · 01-09-2012, 12:38 PM

Quote:

Originally Posted by stickelspeed

ya... I set the windshield back a fair amount.

here is the original photo I used as a starting point..

and here is an overlay so you can see the amount of rake..

with 3 school aged kids ... you'd think I could find a stray protractor to measure the sweep... but.. sorry can't find one.

I'd say it's laid back approx. 15 degrees maybe.. not sure.

Thanks for the info and the rendering. I cant wait to get the top off this burb

chevy2racr · 01-09-2012, 12:47 PM

Quote:

Originally Posted by superflysteiny

Thanks for the info and the rendering. I cant wait to get the top off this burb

Me too! We're all sitting on the edge of our seats!

glos55 · 01-09-2012, 01:37 PM

OK...... Now I'm Hooked Too! It needs highback buckets with sm. chrome roll bar behind.

**superflysteiny** · 01-09-2012, 07:43 PM

Quote:

Originally Posted by glos55

OK...... Now I'm Hooked Too! It needs highback buckets with sm. chrome roll bar behind.

funny you shoud say that I was considering putting very small roll bars behind each seat.

01-05-2012, 12:22 AM	#51
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: I dont no what I am building haha dang!! we have to wait till the weekend to see pics __________________ CHEVY ONLY... Nothin Else !

01-05-2012, 11:52 AM	#52
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: I dont no what I am building haha Sorry guys I am collecting parts. Just ordered the patch panels yesterday. Mario and I talked yesterday we are going to try to keep the budget at 15000k. That will be tough but we will see. This truck will be satin. I have never had a satin truck. It will be tough not to make it base clear but if I want to stay in the budget this is the way it has to be. HA HA it is going to be tough I just keep because this is really going to be tough. Mario said thats why he is here to keep me in line. __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

01-05-2012, 12:06 PM	#54
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: I dont no what I am building haha I just wanted to show you guys how clean this door is. I am running the one ton grill. I have been itching to put this grill on something __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

01-05-2012, 12:11 PM	#55
Delmo Registered User Join Date: Feb 2003 Location: Burbank CA Posts: 1,226	Re: I dont no what I am building haha Those grilles are so sick.

01-05-2012, 12:32 PM	#56
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: I dont no what I am building haha yep that is a SUPER COOL grill, in the 15000 are you counting the cost of the body, frame , wheels and tires , engine ?? unless you are getting tons of stuff sponsored that budget blows my mind ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-08-2012, 03:46 PM	#60
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: I dont no what I am building haha Just had some time to read and catch up on your new project. I am real interested and amazed at your past work. A buddy of mine is doing a Burb also, and I will be helping him with the frame/suspension. He is leaning towards the Scott's set up at this time, he is just hung up on running 24x14 wheels with the super wide pirelli tire out back... When do we get to see the top off? __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

01-08-2012, 08:01 PM	#61
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: I dont no what I am building haha Should be really cool if he goes with the big rear wheels Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

01-08-2012, 08:12 PM	#62
70-Shorty Registered User Join Date: Jul 2010 Location: Ontario CA Posts: 317	Re: I dont no what I am building haha i would think it would be way cool to shorten the thing as if Chevy made a two-door blazer in that body style....just an early model roadster truck! Tim __________________ Ontario CA•70 Chevy Shortbed Fleetside C-10 71 Chevy Longbed Fleetside C-20 (sold ) 63 Chevy II Nova SS 02 Ford F-150 Harley-Davidson supercharged 5.4 2000 Harley Roadking Hot Bike Baggers Mag Shoot http://s263.photobucket.com/albums/i...oot/?start=all some truck lettering & flame jobs http://www.flickr.com/photos/4950319...7602894916215/

01-08-2012, 09:04 PM	#63
stickelspeed Registered User Join Date: Jul 2009 Location: Calgary Alberta Posts: 130	Re: I dont no what I am building haha I couldn't picture what this would look like .. so I took a crack (hack) at rendering one option for it.. tried to keep it low budget based on your build description.. __________________ Here's my Worlds Slowest Dropmember Build and, you can check me out on Instagram as @stickelspeed and @digitalc10

01-08-2012, 09:07 PM	#64
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: I dont no what I am building haha That is sick Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-09-2012, 01:43 AM	#68
Lolyin58 Registered User Join Date: Mar 2008 Location: Calgary,Alberta,Canada Posts: 372	Re: I dont no what I am building haha Eric, that is totally you. Time to kick it up a notch!!!!!!!!!!!!!

01-09-2012, 10:52 AM	#69
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: I dont no what I am building haha I did not get anything done on the truck this weekend because I am building a frame jig for this truck. I plan on doing a ton of welding on this truck frame so I want to make sure it does not change shape from all the heat. Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

01-09-2012, 01:37 PM	#74
glos55 Registered User Join Date: Nov 2010 Location: Kalamazoo, MI Posts: 1,008	Re: I dont no what I am building haha OK...... Now I'm Hooked Too! It needs highback buckets with sm. chrome roll bar behind.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.