TX column- parts for sale...

[77chris03]

i have the column i was gonna use for sale..i bought it from Randy(TEEITUP) for 75 bucks and i repainted and rebuilt it. right now it is disassembled, but all there. i will sell pieces if needed. everything is in very good shape. I installed new upper and lower bearings, i have the shifter lever very clean for oem, turn signal lever also very clean for oem. the splines on the shaft are not worn or missing...let me know

[Clyde65]

tilt?

[jaros44sr]

How much for the shift lever

[coop34]

How much for the whole thing?

[77chris03]

Originally Posted by Clyde65

tilt?

No not a tilt sorry

Originally Posted by jaros44sr

How much for the shift lever

25 shipped.

Originally Posted by coop34

How much for the whole thing?

It's disassembled right now.....so 120 plus shipping. It would ship in the box my new one came in.
Posted via Mobile Device

It's gonna have to be touched up or can be painted the color u want. I'm using it for measurements for my nss location. The upper and lower bearings are new gm bearings original horn switch that's clean the turn switch is 100% complete with the hazard button in good condition. Canceling cam is new. I disassembled the entire column degreased, regreased, assembled, clean all electrical connections and applied dielectric grease to all connections. Just the small parts cost me quite a bit of time and money.

[77chris03]

I will post pics asap. Not at my storage unit right now so its a little hard.
Posted via Mobile Device

[77chris03]

open to offers too....

[77chris03]

its been well over 24 hrs...so if anyone wants it, speak now...

i will seperate everything if needed. shifter, signal levers, gear indicator, tube, shaft with horn piece and a steering wheel adapter thats already on the shaft, upper bearing, lower bearing, i have several steering shafts...also have the lower rag joint for 80 model gearbox in good condition. if this doesnt sell, everything will go to scrap and the signal cables will be cut up and used on another project.

[newmaac]

I am interested in the turn signal lever and switch.
Are the harness wires cut, or does it still have the plug?
Shipped to 95014.

Thanks,
Mike

[77chris03]

Originally Posted by newmaac

I am interested in the turn signal lever and switch.
Are the harness wires cut, or does it still have the plug?
Shipped to 95014.

Thanks,
Mike

looking for 75 shipped. or make an offer
The harness is in like new condition. When I bought the column I rebuilt the whole thing. It has a new cancelling cam and springs. The harness looks new.
Posted via Mobile Device

[77chris03]

heres a few pics of the harness, etc..

[tooter]

How much for just the switch If he passes ?

[77chris03]

Heres the shifter lever with the pin and the turn signal lever..

[77chris03]

Heres the upper and lower bearings...these are new OEM bearings. They were in GM plastic bags when i installed them...
these i will let go for 45 shipped. they are new and have never seen .0001 miles. i paid i think about 60 for both of them.

[mr.wilson]

I'm interested in the switch/harness as well.
Posted via Mobile Device
Posted via Mobile Device

[77chris03]

Originally Posted by tooter

How much for just the switch If he passes ?

70 shipped

[tooter]

I'll pass might get a whole column
Posted via Mobile Device

[mr.wilson]

I'll pass as well.
Posted via Mobile Device

[newmaac]

Chris, I found what I need locally.
Thanks anyway.

[77chris03]

whats it worth then guys?

[77chris03]

harness with new turn camber and turn signal lever 55 shipped...or entire column for 100 plus shipping.

[77chris03]

nobody take this as trying to rip anyone off...parts that i have are clean and all you have to do is install. the turn signal cam is 15 bucks new and its already installed...

[77chris03]

prices reduced...gf said i need to get these out of her house....so no reasonable offer refused.....

[KSCHEVYUP]

Do you still have the complete column / parts for sale?
Ron

[77chris03]

Yup. What do u need
Posted via Mobile Device