IN Blasted 2wd Saginaw Power Steer Box - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyMetalChevy · 02-08-2012, 04:03 PM

Quote:

Originally Posted by longhorn70gmc

Hello,
Is this still available? I am interested. What year and model did it exactly come out of? I am looking at installing it in my 1 ton Chevy Longhorn and it should work. The spline where the steering column connects/slides on, is it the smaller/30 or larger/36 spline? Did it have a pitman arm? Let me know,
R/

I bought a few of these in bulk a while back. I know it is for our year trucks just not sure what exact year. I purchased some 4x4 boxes too a while back. It is a 30 spline and I do not currently have any extra pitman arms...

Thanks,
Duane

mahanian · 02-08-2012, 04:56 PM

That looks great, how do you insure you don't get any sand past the input or output shaft seals?

HeavyMetalChevy · 02-08-2012, 05:01 PM

Quote:

Originally Posted by mahanian

That looks great, how do you insure you don't get any sand past the input or output shaft seals?

I did not directly blast those parts. Degreaser and acid compound works wonders!!!

longhorn70gmc · 02-09-2012, 06:26 PM

I'll Take it.
Thanks for getting back to me. I am going to go the Money order route. I will get that done up and let ya know. I looked at the steering box in the truck last night and it looked so dirty and grimmy. I already have the tools to swap the pieces over, so I am ahead of the game. Talk to you soon.
R/

HeavyMetalChevy · 02-09-2012, 09:45 PM

Quote:

Originally Posted by longhorn70gmc

I'll Take it.
Thanks for getting back to me. I am going to go the Money order route. I will get that done up and let ya know. I looked at the steering box in the truck last night and it looked so dirty and grimmy. I already have the tools to swap the pieces over, so I am ahead of the game. Talk to you soon.
R/

Sounds good! thanks much!!!

longhorn70gmc · 02-14-2012, 09:12 PM

Hey Bro,
I PMed ya and wanted you to know it is on its way to you. Talk to you soon.
R/

02-08-2012, 04:56 PM	#27
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Blasted 2wd Saginaw Power Steer Box That looks great, how do you insure you don't get any sand past the input or output shaft seals?

02-09-2012, 06:26 PM	#29
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Blasted 2wd Saginaw Power Steer Box I'll Take it. Thanks for getting back to me. I am going to go the Money order route. I will get that done up and let ya know. I looked at the steering box in the truck last night and it looked so dirty and grimmy. I already have the tools to swap the pieces over, so I am ahead of the game. Talk to you soon. R/ __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

02-14-2012, 09:12 PM	#31
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Blasted 2wd Saginaw Power Steer Box Hey Bro, I PMed ya and wanted you to know it is on its way to you. Talk to you soon. R/ __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.