Fan Help Please ! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

landon4421 · 09-07-2003, 11:28 PM

I am looking for a fan for our 1969 burb ! Could someone tell me what kind I should buy ! Or can I get a used one ? I was looking for a pic or two of the fan and schroud used please ! Thank You in advance Landon

Longhorn Man · 09-07-2003, 11:44 PM

Aftermarket...you can get new ones.
I hear van ones work if your combo is right.
Remember most inline trucks had no shroud, and then the V 6 trucks and big block trucks were almost the same, and then there is another part number for small block...

landon4421 · 09-08-2003, 10:38 AM

I wanted to put a schroud on it ! The schroud I have now is 19 3/8 " across the opening ! So that is what I need. Thanks for the input Longhorn Man !

landon4421 · 09-09-2003, 12:02 AM

Ok one more question is this a stock fan schroud? For the 69 or something? I want to use it on the 69 burb and it is a 2wd with the 350 and A/C. So will this work ?

Thanks for the help Landon

crazy longhorn · 09-09-2003, 12:18 AM

that looks like the one I had on my sb powered longhorn.....

9teen69 · 09-09-2003, 12:32 AM

Not sure if it will help but here's the one on my 69 truck without a/c.

teeitup · 09-09-2003, 06:45 PM

try again

landon4421 · 09-09-2003, 08:25 PM

how much for the fan wiht more than 4 blades? how much and what dose it mesure out to from fan tip to fan tip? thanks Landon

teeitup · 09-09-2003, 10:06 PM

Landon, I'll measure it tomorrow after work.

landon4421 · 09-09-2003, 10:22 PM

thanks randy !

teeitup · 09-10-2003, 08:47 PM

Its 19 1/2 wide Landon.

landon4421 · 09-11-2003, 10:03 AM

OK randy that will probally work, let me go and double check and I will let you know ! how much $$ do you want for the fan?

teeitup · 09-11-2003, 01:07 PM

Its priceless Landon!!

I'll find a box and you pay shipping hows that sound? Pm me your address. Thanks Randy

landon4421 · 09-11-2003, 01:51 PM

what come around goes around. you da man, I will hook you up one day. thanks a lot randy. Landon

PM SENT..

busterwivell · 09-12-2003, 01:11 PM

That looks like the same fan I put on my 71 402.

09-07-2003, 11:28 PM	#1
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	Fan Help Please ! I am looking for a fan for our 1969 burb ! Could someone tell me what kind I should buy ! Or can I get a used one ? I was looking for a pic or two of the fan and schroud used please ! Thank You in advance Landon __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

09-08-2003, 10:38 AM	#3
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	I wanted to put a schroud on it ! The schroud I have now is 19 3/8 " across the opening ! So that is what I need. Thanks for the input Longhorn Man ! __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

09-09-2003, 12:02 AM	#4
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	Ok one more question is this a stock fan schroud? For the 69 or something? I want to use it on the 69 burb and it is a 2wd with the 350 and A/C. So will this work ? Thanks for the help Landon Attached Images __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

09-09-2003, 12:18 AM	#5
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	that looks like the one I had on my sb powered longhorn..... __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

09-09-2003, 12:32 AM	#6
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Not sure if it will help but here's the one on my 69 truck without a/c. __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

09-07-2003, 11:44 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Aftermarket...you can get new ones. I hear van ones work if your combo is right. Remember most inline trucks had no shroud, and then the V 6 trucks and big block trucks were almost the same, and then there is another part number for small block...

09-09-2003, 06:45 PM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	try again __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-09-2003, 08:25 PM	#8
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	how much for the fan wiht more than 4 blades? how much and what dose it mesure out to from fan tip to fan tip? thanks Landon __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

09-09-2003, 10:06 PM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Landon, I'll measure it tomorrow after work. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-09-2003, 10:22 PM	#10
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	thanks randy ! __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

09-10-2003, 08:47 PM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Its 19 1/2 wide Landon. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-11-2003, 10:03 AM	#12
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	OK randy that will probally work, let me go and double check and I will let you know ! how much $$ do you want for the fan? __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

09-11-2003, 01:07 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Its priceless Landon!! I'll find a box and you pay shipping hows that sound? Pm me your address. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-11-2003, 01:51 PM	#14
landon4421 Life is Good ! Join Date: Mar 2002 Location: Hollister, Ca. Posts: 1,992	what come around goes around. you da man, I will hook you up one day. thanks a lot randy. Landon PM SENT.. __________________ '72 Chevy C10 4x4 shortbed "Project" '71 Chevy C10 2wd longbed "partsrunner" '91 Chevy Burb 4x4 "kidrunner" '14 Honda Accord Sport "commuter"

09-12-2003, 01:11 PM	#15
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	That looks like the same fan I put on my 71 402. __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.