![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Mar 2007
Location: tucson
Posts: 71
|
6 cylinder header question
Is there special spacers for 6 cylinder headers? I was given a header but it did not come with any hardware. I plan on using the stock intake and the #1 and #6 cylinder mounting blots are longer then the rest and I don't know what to use.
thanks |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jun 2011
Location: Monroe, WI
Posts: 1,415
|
Re: 6 cylinder header question
If no one on here knows tom will.
http://www.stoveboltengineco.com/
__________________
Adam My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706 |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,284
|
Re: 6 cylinder header question
You may have to modify some of the spacers to fit your application. One thing you want to do is replace is the mounting pins in front of Cylinder #1 and behind Cylinder #6 with either cap screws [bolts] or threaded studs. They will back out with WD-40 and a Vice Grips. They are threaded 3/8-16 UNC. Headers are less likely to leak that way. You may want to use all new bolts, or 3/8-16--3/8-24 long studs with securing nuts. The stock fasteners may not fit with the headers. What headers are you using?
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. |
![]() |
![]() |
![]() |
Bookmarks |
|
|