Hey yall im new here. And i have a few questions

[chevybuilder18]

Hello there fellow truck owners, im new to this site so id like to introduce my self. My names Alex.

I know what this sites about, and its all about chevy pick up trucks. Right place to be when you have one right? Well ill explain what i have, and im not bragging cause it needs serious TLC. The submodel is a 78 scottsdale, 2wd C10. The front clip however is for the silverado C10, no idea what year the clip is but looks pretty sharp. The bed is an old stepside, original cab and bed. The frame came off a 75 C10 short bed truck, the first frame was related to a car accident. The interior is all there, right down to the ceiling pristine. The gauges work, original 350 chevy and it runs pretty good. TH350 The rear brake line went out where the splitter connects, so we had to block em off for temparory till i get that fixed. I have 12 bolt full floater rear end, and the back plate looks like a big GM 14 bolt. Idk what gears are in the 12 bolt, was thinking bout putting a semi floater 92 G20 Van 10 bolt rear in with 3.42s, but before that i gotta figure out what i have now and decide if these ring and pinions would help save gas and make it move.

Any ideas on what this rear end has in it.? It has to be a 75, it cant be original.
Posted via Mobile Device

[chevybuilder18]

well i guess it aint a scottsdale, its a c10 silverado. Thought the end year for this submodel with a stepside was a 77, but its a 78. bed floor is all wood. But the woods rotted out of it. Can you help me with this? Im trying to figure out what i have. Im also planing on lowering this and customizing it a lil any opinions on the drop spindles, and lowering of the rear would be helpful. Plan on doing some other things like another 1 and 1/2 on the fender flares since the insides of the fenders are rotted and holy too, plus thatd give me some room to place some 15X10 rims with P305/65R15s.
Posted via Mobile Device

[broey]

welcome to the sight. take some pics and post em up!

[chevybuilder18]

heres some photos of my baby, she aint much but i plan on doing her some good

and the hoods a lil bent out of shape. When i got it, it wasnt bolted on so we laid it down and i ran it over testing the brakes. It then got a new master cylinder.
But im still being positive, since the old hood wont shut and is pretty much gone gonna reuse it for my rear fenders
Posted via Mobile Device

[chevybuilder18]

heres some more
Posted via Mobile Device

[chevybuilder18]

fun parts
Posted via Mobile Device

[Corts60]

The contrast between how nice the cab is and how bad the cab is is incredible. Welcome to the site! What are your plans for it?

Also I would recommend not driving it until you get the rear brakes working again. That is dangerous not only to you but to other drivers as well.

[chevybuilder18]

some more....
Posted via Mobile Device

[chevybuilder18]

Originally Posted by Corts60

The contrast between how nice the cab is and how bad the cab is is incredible. Welcome to the site! What are your plans for it?

Also I would recommend not driving it until you get the rear brakes working again. That is dangerous not only to you but to other drivers as well.

Thank you for welcoming me. To answer your first qeustion. I plan on fixing the brakes, dropping a lil muscle in it, 406 sbc with large port bowties to sit atop. Serpentine belt drive and reverse style water pump with a G20 van 2 core aluminum radiator. Other plans fix the cab rockers, driver side cab corner and left side rocker. Then im gonna keep original carpet and clean it up a bit, lay some diomond plate in the floor boards. Then patch the steps on the bed with some fiber glass resin kit, lay some diomond plate on them.. The paint scheme would be a 2 tone hot rod red and jet black. Idk which way to put it but im thinking high up black and 75 percent at the bottom being hot rod red. Then im gonna keep the bowtie center caps and mount em on some 15X8s up front and some rear 15X10 cragars.... then i plan on patching the bed up, and dropping some polished wood in the bed, paint the frame, and drop her more like 3 inchs. Install some ladder bars. Interior: Keep the bench and make some sorta arm rest for it. I love an arm rest
Posted via Mobile Device

[76Charlie]

TLC? Clear coat it, throw some glasspacks on her and roar down the street!

[chevybuilder18]

Originally Posted by 76Charlie

TLC? Clear coat it, throw some glasspacks on her and roar down the street!

ive gotta set of thrush muffs sittin on her, i cut this lip out of the outlet, but left the lip on the inlet so itd keep back pressure out at low engine speeds, but also reduce the flow blockage in the muffs. soon ill have headers outta 78 chevy nova. Guy wants my manifolds, and i know someone with a 72 taking his ramhorn manis off and replacing em with headers.... I told him if he does get rid of those to let me buy em
Posted via Mobile Device

[1977cheyenne_C10]

welcome aboard Alex

[76Charlie]

PSSSSSH back pressure! I got some 1 1/2 foot pipe with true dual 18" cherry bomb glassers dump right under your tookus...on a big block 454...ALL DAY!..........I'm lucky I haven't been pulled over haha!

[mud.man.rj]

Welcome to the site, looks like you have your hands full on this truck, only work though and they get nothing but better in time.

[shipma2]

my 12 bolt is 4.11 gear from the stamp . GM offered a bunch of different gear ratios though for the 12 bolt. somewhere on the axle would say what gear ratio it is. I can not rightly remember as its been ages sense i looked at my stamp. PS nice truck those stepsides are cool

[chevybuilder18]

Originally Posted by 1977cheyenne_C10

welcome aboard Alex

thank you for welcoming me, its a pleasure. Before i didnt know what i wanted to rod out,(im chevy dude all the way so it had to be a chevy) but this is something i couldnt resist. Stepsides are great lookin when done right. Plan on doing her right
Posted via Mobile Device

[chevybuilder18]

Originally Posted by 76Charlie

PSSSSSH back pressure! I got some 1 1/2 foot pipe with true dual 18" cherry bomb glassers dump right under your tookus...on a big block 454...ALL DAY!..........I'm lucky I haven't been pulled over haha!

now you sound like my uncle, 318 with a chevrolet drive shaft cut in half for home made glass packs
Naw but the nova headers odda make it sound mean even with the muffs
Posted via Mobile Device

[76Charlie]

i aint got no headers sadly

[chevybuilder18]

Originally Posted by mud.man.rj

Welcome to the site, looks like you have your hands full on this truck, only work though and they get nothing but better in time.

thank you for the welcoming
Yea pretty much got em full especially with all the rust holes on the bed fenders. Base part notta slight bubble of rust.
Posted via Mobile Device

[chevybuilder18]

Originally Posted by shipma2

my 12 bolt is 4.11 gear from the stamp . GM offered a bunch of different gear ratios though for the 12 bolt. somewhere on the axle would say what gear ratio it is. I can not rightly remember as its been ages sense i looked at my stamp. PS nice truck those stepsides are cool

wow!! 4.11s are a bit granny, but if i gotta ill swap that old ten bolt with 3.42s. That odda be enough to move the truck and save some gas... Sheesh. Needa find me a 200R4 or a T56, thatd be fun to do.
And thank you, i really love the look of a stepside also. Hard to beat for $300
Posted via Mobile Device

[chevybuilder18]

Charlie, think chevelle headers for BBC would work perfectly, i see some on craigs, or in the summit book, not the same price as sbc headers, but way worth it.
Posted via Mobile Device

[76Charlie]

Yeah I just finished the bbc build, I'm getting ready for college and completely out of cash haha! But one day, if I don't swap in a diesel

[chevybuilder18]

Check google for this part number on BBC headers. PTE-H8012. These are patriots long tube, $197 and there huggers. For chevelle, camaro, and Nova. Should fit a truck with no problems
Posted via Mobile Device

[76Charlie]

the problem with headers like those is they have a tendency to leak, I couldn't feel comfortable getting headers for anything less than $500 :\

[chevybuilder18]

Got the tail lights fixed, new round trailer lights so its road worthy. I dont have a photo of that now but will later
Posted via Mobile Device