SD GMC Hood, Cowl, Motor Mounts, Rally Rims, 71 c20 rear end - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

treveiger · 04-11-2012, 03:29 PM

Quote:

Originally Posted by HeavyMetalChevy

this banding right here works great because of the holes.

O yeah I've seen that stuff before.
How much would shipping be from 57106 to 93304 for the rear end?
Posted via Mobile Device

kriswvu1202 · 04-11-2012, 04:16 PM

That's shipping alone, or total with shipping?

treveiger · 04-11-2012, 04:40 PM

That's shipping alone, I asked twice if it was correct and I guess it was...
Posted via Mobile Device

kriswvu1202 · 04-11-2012, 05:59 PM

Yeeeeaaaahhhhh....I'm gonna have to pass on that. Lol
Posted via Mobile Device

treveiger · 04-12-2012, 12:09 AM

Quote:

Originally Posted by kriswvu1202

Yeeeeaaaahhhhh....I'm gonna have to pass on that. Lol
Posted via Mobile Device

Hey I understand, if you want I can split the tires up into pairs so it'd only be half the cost of the total price. The shipping is a killer.
Posted via Mobile Device

HeavyMetalChevy · 04-12-2012, 12:13 AM

at200 hun for the whole setup...that is a steal of a deal!!!!!!!!!!!!

treveiger · 04-12-2012, 12:42 AM

Quote:

Originally Posted by HeavyMetalChevy

at200 hun for the whole setup...that is a steal of a deal!!!!!!!!!!!!

Is that for the shipping? LOL I'm confused.
Posted via Mobile Device

kriswvu1202 · 04-12-2012, 05:12 AM

Hmm...so that comes out to $114 for 2 wheels shipped...Let me think on that for a day. I can probably do that.

tabarcus · 04-12-2012, 08:31 AM

I will take the wheels and tires, pending shipping costs to 22405 via Fed Ex Ground.
Fed Ex will accept four wheels without a pallet.

treveiger · 04-12-2012, 01:50 PM

Quote:

Originally Posted by kriswvu1202

Hmm...so that comes out to $114 for 2 wheels shipped...Let me think on that for a day. I can probably do that.

K sounds good.
Posted via Mobile Device

treveiger · 04-12-2012, 01:53 PM

Quote:

Originally Posted by tabarcus

I will take the wheels and tires, pending shipping costs to 22405 via Fed Ex Ground.
Fed Ex will accept four wheels without a pallet.

If the deal with kriswvu1202 doesn't work then your runner up an I'll get you a quote for all four but if it does I can get you a quote for the two if you desire.
Posted via Mobile Device

kriswvu1202 · 04-12-2012, 07:50 PM

Hey man, if someone wants all four, I'll give them first shot so you don't have to split them up. If that deal doesn't work out, let me know and we'll work something out on a pair.

HeavyMetalChevy · 04-12-2012, 08:12 PM

Quote:

Originally Posted by treveiger

Is that for the shipping? LOL I'm confused.
Posted via Mobile Device

I was saying for the your price on the wheels. Was just saying even with the shipping quote you gave that is still a good price for all four wheels and center caps

kriswvu1202 · 04-12-2012, 08:36 PM

You know what? Duane you convinced me. After I thought about it, that is a good price for 4 wheels. I'll take all 4. PM me with payment info... and if you can find a better quote on shipping that would be SWEEEET!

HeavyMetalChevy · 04-12-2012, 08:48 PM

Quote:

Originally Posted by treveiger

O yeah I've seen that stuff before.
How much would shipping be from 57106 to 93304 for the rear end?
Posted via Mobile Device

Quote:

Originally Posted by treveiger

The rear end is a 3.07 from a 71 Chevy cheynne, how would be the best way to secure it with a pallet?
Posted via Mobile Device

Still need the make of the rear end so I can get an accurate weight. Is it 12 bolt, Dana 44, Dana 60, etc. Thanks as soon as I get that I can have a quote within minutes for you sir!

treveiger · 04-12-2012, 10:48 PM

Quote:

Originally Posted by kriswvu1202

You know what? Duane you convinced me. After I thought about it, that is a good price for 4 wheels. I'll take all 4. PM me with payment info... and if you can find a better quote on shipping that would be SWEEEET!

Alright man let me call a few more places tomorrow to see if they can maybe do it cheaper. I'll pm you after I get a for sure that the shipping is as low as possible.
Posted via Mobile Device

treveiger · 04-12-2012, 10:55 PM

Quote:

Originally Posted by HeavyMetalChevy

Still need the make of the rear end so I can get an accurate weight. Is it 12 bolt, Dana 44, Dana 60, etc. Thanks as soon as I get that I can have a quote within minutes for you sir!

It's a 12 bolt rear end that is 5 lug.
Posted via Mobile Device

HeavyMetalChevy · 04-12-2012, 11:20 PM

Quote:

Originally Posted by treveiger

O yeah I've seen that stuff before.
How much would shipping be from 57106 to 93304 for the rear end?
Posted via Mobile Device

Be about 250 lbs. Does not need to be on pallet. class 100 freight. $167.95

HeavyMetalChevy · 04-12-2012, 11:22 PM

so with your price on it that is still a very affordable nice shape rear end to his door.

DesertCat · 04-12-2012, 11:32 PM

Quote:

Originally Posted by HeavyMetalChevy

a very affordable nice shape rear end

something we all could use

treveiger · 04-13-2012, 04:48 PM

Quote:

Originally Posted by HeavyMetalChevy

so with your price on it that is still a very affordable nice shape rear end to his door.

Hey thanks man ill tell him right now. What shipping company do you have?
Posted via Mobile Device

HeavyMetalChevy · 04-13-2012, 04:59 PM

It's a logistics company. I "know" the regional sales manager. They work with all the largest freight carriers.. Roadway, UPS, YRC, Estes, R&L, etc

treveiger · 04-13-2012, 05:09 PM

Quote:

Originally Posted by HeavyMetalChevy

It's a logistics company. I "know" the regional sales manager. They work with all the largest freight carriers.. Roadway, UPS, YRC, Estes, R&L, etc

Oo ok, so if I do ship it where would I take this beast? O an thanks again!
Posted via Mobile Device

HeavyMetalChevy · 04-13-2012, 05:13 PM

Quote:

Originally Posted by treveiger

Oo ok, so if I do ship it where would I take this beast? O an thanks again!
Posted via Mobile Device

I can provide a freight terminal within reasonable distance... Or you could take it to a local hardware or any Commercial business if you knew someone who worked there or just talked to a manager. I have done it many times before and they don't usually mind helping.

Residential delivery/pickup is always available too but there is always a surcharge around $30. That is typical for any carrier. Any business address and/or freight terminal run the same rate.

treveiger · 04-13-2012, 05:23 PM

Quote:

Originally Posted by HeavyMetalChevy

I can provide a freight terminal within reasonable distance... Or you could take it to a local hardware or any Commercial business if you knew someone who worked there or just talked to a manager. I have done it many times before and they don't usually mind helping.

Residential delivery/pickup is always available too but there is always a surcharge around $30. That is typical for any carrier. Any business address and/or freight terminal run the same rate.

O ok I live on Sioux falls so there should be somethin here lol.
Posted via Mobile Device

04-11-2012, 04:16 PM	#27
kriswvu1202 Registered User Join Date: Sep 2011 Location: Morgantown, WV Posts: 111	Re: GMC Hood, Cowl, Motor Mounts, Rally Rims, 71 c20 rear end That's shipping alone, or total with shipping? __________________ "And when you discover what you will be in your life, set out to do it as if God Almighty called you at this particular moment in history to do it. Don't just set out to do a good job. Set out to do such a good job that the living, the dead or the unborn couldn't do it any better." -MLK

04-11-2012, 04:40 PM	#28
treveiger Senior Member Join Date: Jul 2010 Location: South Dakota Posts: 4,110	Re: GMC Hood, Cowl, Motor Mounts, Rally Rims, 71 c20 rear end That's shipping alone, I asked twice if it was correct and I guess it was... Posted via Mobile Device __________________ 1969 Chevy c20(Miss Hackjob)

04-11-2012, 05:59 PM	#29
kriswvu1202 Registered User Join Date: Sep 2011 Location: Morgantown, WV Posts: 111	Re: GMC Hood, Cowl, Motor Mounts, Rally Rims, 71 c20 rear end Yeeeeaaaahhhhh....I'm gonna have to pass on that. Lol Posted via Mobile Device __________________ "And when you discover what you will be in your life, set out to do it as if God Almighty called you at this particular moment in history to do it. Don't just set out to do a good job. Set out to do such a good job that the living, the dead or the unborn couldn't do it any better." -MLK

04-12-2012, 12:13 AM	#31
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: GMC Hood, Cowl, Motor Mounts, Rally Rims, 71 c20 rear end at200 hun for the whole setup...that is a steal of a deal!!!!!!!!!!!! __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

04-12-2012, 05:12 AM	#33
kriswvu1202 Registered User Join Date: Sep 2011 Location: Morgantown, WV Posts: 111	Re: GMC Hood, Cowl, Motor Mounts, Rally Rims, 71 c20 rear end Hmm...so that comes out to $114 for 2 wheels shipped...Let me think on that for a day. I can probably do that. __________________ "And when you discover what you will be in your life, set out to do it as if God Almighty called you at this particular moment in history to do it. Don't just set out to do a good job. Set out to do such a good job that the living, the dead or the unborn couldn't do it any better." -MLK

04-12-2012, 08:31 AM	#34
tabarcus 72ChevyStep Join Date: Jun 2009 Location: Fredericksburg, VA Posts: 545	Re: GMC Hood, Cowl, Motor Mounts, Rally Rims, 71 c20 rear end I will take the wheels and tires, pending shipping costs to 22405 via Fed Ex Ground. Fed Ex will accept four wheels without a pallet.

04-12-2012, 07:50 PM	#37
kriswvu1202 Registered User Join Date: Sep 2011 Location: Morgantown, WV Posts: 111	Re: GMC Hood, Cowl, Motor Mounts, Rally Rims, 71 c20 rear end Hey man, if someone wants all four, I'll give them first shot so you don't have to split them up. If that deal doesn't work out, let me know and we'll work something out on a pair. __________________ "And when you discover what you will be in your life, set out to do it as if God Almighty called you at this particular moment in history to do it. Don't just set out to do a good job. Set out to do such a good job that the living, the dead or the unborn couldn't do it any better." -MLK

04-12-2012, 08:36 PM	#39
kriswvu1202 Registered User Join Date: Sep 2011 Location: Morgantown, WV Posts: 111	Re: GMC Hood, Cowl, Motor Mounts, Rally Rims, 71 c20 rear end You know what? Duane you convinced me. After I thought about it, that is a good price for 4 wheels. I'll take all 4. PM me with payment info... and if you can find a better quote on shipping that would be SWEEEET! __________________ "And when you discover what you will be in your life, set out to do it as if God Almighty called you at this particular moment in history to do it. Don't just set out to do a good job. Set out to do such a good job that the living, the dead or the unborn couldn't do it any better." -MLK

04-12-2012, 11:22 PM	#44
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: GMC Hood, Cowl, Motor Mounts, Rally Rims, 71 c20 rear end so with your price on it that is still a very affordable nice shape rear end to his door. __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

04-13-2012, 04:59 PM	#47
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: GMC Hood, Cowl, Motor Mounts, Rally Rims, 71 c20 rear end It's a logistics company. I "know" the regional sales manager. They work with all the largest freight carriers.. Roadway, UPS, YRC, Estes, R&L, etc __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.