![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
![]() Join Date: Sep 2009
Location: Lubbock Texas
Posts: 1,049
|
![]()
We were working on Jason's show truck (which we do not get around to very often) and found some differences on the driver inner fender and would like to get some knowledgable input. The hole for the clip that holds the emergency brake cable is lower and has a welded square nut on the back side and a dimple where the previous yrs hole was located. Also there is a factory indention with a hole , lower front, to hold the clip for the alt wire. We saw this on a 72 but do not know what other yrs are like this. HA.. now we need a NOS inner fender as described above as the one we have will not work on this build.
Even an old dog can learn new stuff.... Paul and Jason
__________________
You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually |
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Sep 2009
Location: Lubbock Texas
Posts: 1,049
|
Re: question on inner renders
ttt
__________________
You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually |
![]() |
![]() |
![]() |
#3 |
Active Member
![]() Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: question on inner fenders
bump for you.
What year is Jason's truck? Gonna be hard to find a new old stock of any part on these trucks. If you post a "want to buy" in the parts section you may be able to find a decent used one. |
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Sep 2009
Location: Lubbock Texas
Posts: 1,049
|
Re: question on inner fenders
His show truck is a 72 swb bb hard loaded one owner cheyenne super.
__________________
You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually |
![]() |
![]() |
![]() |
#5 |
Active Member
![]() Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: question on inner fenders
|
![]() |
![]() |
![]() |
#6 |
Senior Member
![]() Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 6,286
|
Re: question on inner fenders
Paul, my 70 has the square nut and the hole for the alt wire harness like you describe. Hope this helps. I saw an ad for a pair of NOS inner fenders on here the other day.
Mark
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear |
![]() |
![]() |
![]() |
#7 | |
Registered User
![]() Join Date: Sep 2009
Location: Lubbock Texas
Posts: 1,049
|
Re: question on inner fenders
Quote:
Paul
__________________
You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually |
|
![]() |
![]() |
![]() |
#8 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,858
|
Re: question on inner fenders
Yes,the driver side 67/68s are different due to the different emergency brake design/location. The same goes for the alternator wire mount. So,you are saying what you have is the 67/68 one? It sounds like you have and are describing the later design in your first post.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
#9 | |
Registered User
![]() Join Date: Sep 2009
Location: Lubbock Texas
Posts: 1,049
|
Re: question on inner fenders
Quote:
Always appreciate you Paul
__________________
You can shear a sheep every year, but you can only skin it once The person dealing with facts is never at the mercy of the person dealing with theory 1972 Cheyenne Super 402 400 A/c bucket seat tilt custom camper Longhorn 1975 Silverado 454 Crew cab camper special dually |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|