Lets see everybody's gauge clusters - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hotrod100 · 04-18-2012, 08:28 AM

Here's mine. A repurposed glove box door.

sixtyeightchevykid · 04-18-2012, 08:38 AM

here is mine. nothing fancy..
didnt realize that it was that bad of a pic.

smokinstang70 · 04-18-2012, 11:25 AM

I am doing an LS swap on my truck and will be needing an electronic gauge for speedometer... however I really want to maintain the stock look to my guages. Has anyone ever seen one of our stock speedometers converted to electric? can it be done?

Thanks as always guys

davepl · 04-18-2012, 12:54 PM

I don't see any GMC Sierra Grande ones in here (ie: colored), so here's mine.

**gmc 2500 4x4** · 11-23-2014, 05:08 PM

old post, nice dashes!!!

twistedchevy · 01-11-2015, 02:50 AM

Has anyone seen or know anything about an ac gauge cluster with a rear ac switch, like this one?

**TBONE1964** · 01-11-2015, 03:12 AM

Quote:

Originally Posted by twistedchevy

Has anyone seen or know anything about an ac gauge cluster with a rear ac switch, like this one?

I need to look into this one. I have never seen a set up like that and never seen a bezel with a hole (factory) there as well.

Thank you for posting.

88fordf150 · 01-11-2015, 07:59 AM

Quote:

Originally Posted by Mudder

You can pick up Autometers on Ebay pretty resonable at times if you watch for them.

Nice job, I like the look.

*Fitz* · 01-11-2015, 09:19 AM

Quote:

Originally Posted by jiggityjoe87

Well I'm looking for some inspiration on what I may want my future gauge cluster to look like, so what better place to look than right here in the forum. So everybody feel free to post up pics of how you have your gauges mounted in your trucks.

Stock? Whazzat?

Steve Hafner · 01-11-2015, 09:27 AM

Quote:

Originally Posted by TBONE1964

I need to look into this one. I have never seen a set up like that and never seen a bezel with a hole (factory) there as well.

Thank you for posting.

It's just a gauge cluster from a Suburban with the rear air conditioning unit over the back door or tailgate.

That lower position can be used for the manual throttle from the factory or dealer.

fp1967 · 01-11-2015, 09:56 AM

Here is one that I put together back in 1984. The tach is out of a 64 or 65 80 series truck. It is a Sun brand and uses the transmitter box under the hood. If I remember correctly, the transmitter uses 1.4 volt mercury batteries. I bought new ones for it, but never could get it to work properly.

**DaHos** · 01-11-2015, 10:30 AM

Freshened up this one last night.........

**TBONE1964** · 01-11-2015, 12:55 PM

Quote:

Originally Posted by DaHos

Freshened up this one last night.........

Very nice Dave

Don Quixote · 01-12-2015, 07:49 AM

You see... when I say I have a 67-72 Chevy/GMC, it really is a 67-72 Chevy/GMC, this is a 67 tach and vacuum dash I picked up a few years ago. I prefer a manual choke and that's the only way I could get it without hacking up the dash. I found out the hard way the tach does NOT like HEI systems so that got the driveway update. My volt guage is beside my CB and the amp guage actually works but it tracks the current going through my trailer brake. Someday I'll make her right...

Andy4639 · 01-12-2015, 10:41 AM

Here is my 2. The first one I had all the gauges + a clock.

Then when I did the 6.0 LS swap I went to Speed Hut gauges. GPS speedometer and all the electronic gauges.

04-18-2012, 08:28 AM	#51
hotrod100 Registered User Join Date: Aug 2009 Location: Bullhead City, AZ. Posts: 88	Re: Lets see everybody's gauge clusters Here's mine. A repurposed glove box door. __________________ My build thread.

04-18-2012, 08:38 AM	#52
sixtyeightchevykid Registered User Join Date: Jan 2010 Location: Stillwater, Oklahoma Posts: 194	Re: Lets see everybody's gauge clusters here is mine. nothing fancy.. didnt realize that it was that bad of a pic. Attached Images __________________ 1968 chevy c10 lwb, 250 inline6, 4 speed,

04-18-2012, 11:25 AM	#53
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: Lets see everybody's gauge clusters I am doing an LS swap on my truck and will be needing an electronic gauge for speedometer... however I really want to maintain the stock look to my guages. Has anyone ever seen one of our stock speedometers converted to electric? can it be done? Thanks as always guys __________________ "Love Affair" Build Thread

04-18-2012, 12:54 PM	#54
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Re: Lets see everybody's gauge clusters I don't see any GMC Sierra Grande ones in here (ie: colored), so here's mine. Attached Images __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

11-23-2014, 05:08 PM	#55
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,973	Re: Lets see everybody's gauge clusters old post, nice dashes!!!

01-11-2015, 02:50 AM	#56
twistedchevy Registered User Join Date: Jan 2015 Location: napa, ca Posts: 249	ac gauge cluster Has anyone seen or know anything about an ac gauge cluster with a rear ac switch, like this one?

01-11-2015, 09:56 AM	#61
fp1967 Registered User Join Date: Aug 2012 Location: U.P. of Michigan Posts: 115	Re: Lets see everybody's gauge clusters Here is one that I put together back in 1984. The tach is out of a 64 or 65 80 series truck. It is a Sun brand and uses the transmitter box under the hood. If I remember correctly, the transmitter uses 1.4 volt mercury batteries. I bought new ones for it, but never could get it to work properly.

01-11-2015, 10:30 AM	#62
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,860	Re: Lets see everybody's gauge clusters Freshened up this one last night......... Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations

01-12-2015, 07:49 AM	#64
Don Quixote Registered User Join Date: May 2008 Location: Woodlawn, TN Posts: 275	Re: Lets see everybody's gauge clusters You see... when I say I have a 67-72 Chevy/GMC, it really is a 67-72 Chevy/GMC, this is a 67 tach and vacuum dash I picked up a few years ago. I prefer a manual choke and that's the only way I could get it without hacking up the dash. I found out the hard way the tach does NOT like HEI systems so that got the driveway update. My volt guage is beside my CB and the amp guage actually works but it tracks the current going through my trailer brake. Someday I'll make her right... Attached Images __________________ Rocinante: 1972 GMC C25, 292, SM465, 14 bolt, power nothing, 440k and still handles my PCS moves Jorge: Kia Roller-skate with lots of buttons for the wife Wovoka: 2017 Indian Chief Vintage, better on gas but not much So far, this is the oldest I've ever been.

01-12-2015, 10:41 AM	#65
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Lets see everybody's gauge clusters Here is my 2. The first one I had all the gauges + a clock. Then when I did the 6.0 LS swap I went to Speed Hut gauges. GPS speedometer and all the electronic gauges. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.