AZ WTB: 67 or 68 dash harness for factory gauges - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mahanian · 04-30-2012, 12:08 AM

I'm looking for a 67 or 68 dash harness for factory gauges in great shape with no splices, burn marks, etc and the bulkhead/firewall plug in good shape. Please post pictures of what you have and how much you want for it

Jerry Jones · 04-30-2012, 12:47 AM

Quote:

Originally Posted by mahanian

I'm looking for a 67 or 68 dash harness for factory gauges in great shape with no splices, burn marks, etc and the bulkhead/firewall plug in good shape. Please post pictures of what you have and how much you want for it

I think I have a good one, but I will not be able to see until Friday. I am subscribing so I can check back to see how you did.

jessewebb · 04-30-2012, 07:57 AM

if you don't find a perfect one, I have one, but the plug for the cluster has been spliced from dummy lights to guages. $35 shipped

Chevy072 · 04-30-2012, 08:05 AM

I have two of them,but they are still under the dashes. I will get them out and get you some pics

mahanian · 04-30-2012, 12:50 PM

Quote:

Originally Posted by Chevy072

I have two of them,but they are still under the dashes. I will get them out and get you some pics

Thanks, if one of them is in great shape I'm definitely interested

*six-T-seven* · 04-30-2012, 12:55 PM

What's the difference in the years? I have a brand new one in the box, pretty sure it's made by M & H. PM if interested.

mahanian · 04-30-2012, 03:46 PM

Quote:

Originally Posted by six-T-seven

What's the difference in the years? I have a brand new one in the box, pretty sure it's made by M & H. PM if interested.

PM sent

mahanian · 05-04-2012, 11:54 AM

Quote:

Originally Posted by Chevy072

I have two of them,but they are still under the dashes. I will get them out and get you some pics

I'm still looking if you have a chance to double check the condition of the two you have and snap some pictures

Jerry Jones · 05-04-2012, 07:24 PM

I will try to get mine out this weekend as well.

mahanian · 05-05-2012, 03:33 PM

Quote:

Originally Posted by Jerry Jones

I will try to get mine out this weekend as well.

Sounds good, thanks

Chevy072 · 05-05-2012, 03:43 PM

Quote:

Originally Posted by mahanian

I'm still looking if you have a chance to double check the condition of the two you have and snap some pictures

Sorry for the delay. I will have pictures up this evening for you. Thanks

Chevy072 · 05-05-2012, 07:25 PM

Quote:

Originally Posted by mahanian

I'm looking for a 67 or 68 dash harness for factory gauges in great shape with no splices, burn marks, etc and the bulkhead/firewall plug in good shape. Please post pictures of what you have and how much you want for it

Finally have some pics for you. Harness is in real nice shape no frays or burns. The only cut wire is the one for the cig. lighter as seen in the picture. The fuse block has some corrosion on the out side tips of the fuse clamps,but when i rubbed it with my finger on a couple of them the rust came off and clips are clean. This is everything under the dash, main harness,heater,radio speaker etc. $60 shipped

04-30-2012, 12:08 AM	#1
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	WTB: 67 or 68 dash harness for factory gauges I'm looking for a 67 or 68 dash harness for factory gauges in great shape with no splices, burn marks, etc and the bulkhead/firewall plug in good shape. Please post pictures of what you have and how much you want for it __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

04-30-2012, 07:57 AM	#3
jessewebb Registered User Join Date: May 2010 Location: beckley, WV. Posts: 823	Re: WTB: 67 or 68 dash harness for factory gauges if you don't find a perfect one, I have one, but the plug for the cluster has been spliced from dummy lights to guages. $35 shipped Attached Images __________________ *Pete* The worst I ever had was wonderful *69 SWB* work in progress *97 Ranger* 6in. lift on 35's *04 325i* lady's ride

04-30-2012, 08:05 AM	#4
Chevy072 Registered User Join Date: Mar 2012 Location: Clermont, Florida Posts: 1,676	Re: WTB: 67 or 68 dash harness for factory gauges I have two of them,but they are still under the dashes. I will get them out and get you some pics

04-30-2012, 12:55 PM	#6
six-T-seven Account Suspended Join Date: Jan 2012 Location: Here and There. Posts: 100	Re: WTB: 67 or 68 dash harness for factory gauges What's the difference in the years? I have a brand new one in the box, pretty sure it's made by M & H. PM if interested.

05-04-2012, 07:24 PM	#9
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,408	Re: WTB: 67 or 68 dash harness for factory gauges I will try to get mine out this weekend as well. __________________ RIP El Jay! Love you brother!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.