|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-23-2012, 04:55 PM
|
#1 |
|
Registered User
Join Date: Apr 2009
Location: Steelville mo
Posts: 52
|
Edelbrock 1406 and Cruise control
I've done a lot of searching and its turning up no definite answers. Is there a way to adapt the stock cruise control to a 1406 carb?
Here is a pic of the stock setup. I'm not even sure how the stock cruise works so i'm not sure what it would take to get it adapted. 
|
|
|
|
05-23-2012, 06:50 PM
|
#2 |
|
Enthusiast
Join Date: Jun 2010
Location: Graham, Wa.
Posts: 192
|
Re: Edelbrock 1406 and Cruise control
In a nutshell the actuator that's connected the linkage, uses a vacuum (provided and regulated by other devices) to hold the throttle position. To adapt to a edelbrock 1406, all you really need is the Edelbrock 1484 cruise control kit, which connects to the edelbrock linkage and allows the factory gm cruise linkage to connect.
http://www.oreillyauto.com/site/c/de...4.oap?pt=N1069 <- that's the kit and what it looks like
__________________
- Cole 1979 Chevy C30 w/ carb 454. 1992 Chevy K1500 w/ tbi 350. *Sold* 1997 Dodge Ram 1500 w/ Magnum 360 *Sold* "Good judgment comes from experience. Experience comes from poor judgment." - George Washington |
|
|
|
|
05-23-2012, 08:31 PM
|
#3 |
|
Registered User
Join Date: Apr 2009
Location: Steelville mo
Posts: 52
|
Re: Edelbrock 1406 and Cruise control
Thanks man. Think that will work along with the piece I have to put on for the throttle and tv cable linkage.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
