The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-03-2012, 05:59 PM   #1
bowhunter65
Registered User
 
Join Date: Jun 2012
Location: saint charles missouri
Posts: 97
newbie here. 4x4 frame question.

I just started a frame off restore on a 71 short bed 4x4. I want to disassemble the entire frame, by removing all rivots. this would allow me to blast all hidden areas. Has any one out there done this. If So, Any suggestions if its a good idea or bad idea. I intend to bolt the frame back together with grade 8 stainless bolts.
bowhunter65 is offline   Reply With Quote
Old 07-03-2012, 06:28 PM   #2
1972RedNeck
Registered User
 
1972RedNeck's Avatar
 
Join Date: Jan 2011
Location: Townsend MT
Posts: 1,725
Re: newbie here. 4x4 frame question.

Use lock tight on all the bolts and hope they don't come loose. That ride might get interesting.
__________________
1966 F250 4X4 416
1972 K20 350 4 OTF
Quote:
Originally Posted by GASoline71 View Post
I once pulled an intake manifold for a cam swap... ended up with a full on drag car that ran in the 11's.
1972RedNeck is offline   Reply With Quote
Old 07-03-2012, 09:04 PM   #3
liftmeup
Registered User
 
Join Date: Jan 2009
Location: Pittsburg PA
Posts: 246
Re: newbie here. 4x4 frame question.

stainless bolts = you truck flying apart, drill all holes out to the next larger size as the bolts will be thinner than the rivet bodies, use fine thread bolts with lock nut.(crush type)
__________________
lifted, locked, rockin
liftmeup is offline   Reply With Quote
Old 07-04-2012, 03:05 PM   #4
Joesjunk
Senior Member
 
Joesjunk's Avatar
 
Join Date: May 2001
Location: Independence MO.
Posts: 7,705
Re: newbie here. 4x4 frame question.

I sure wouldnt remove anything that is riveted on.......
__________________
72 3/4t Custom Deluxe 402/auto 66k Original paint
71 3/4t 4x4 Custom Deluxe 10k original miles Original paint
71 3/4t Cheyenne 402 70k original paint
72 3/4t 4x4 Custom deluxe
72 3/4t 4x4 Custom deluxe 91k original paint
72 Cheyenne/30 Dually
69 Camaro SS396 4-speed
13 GMC 2500HD Duramax I bought new
05 Jeep Wrangler "Willys Edition" 12k miles (I bought new)
85 3/4 ton 4x4 Scottsdale 33k miles original paint
86 1 ton 4x4 SRW Silverado 454 restored
80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint
95 GMC 1 ton dually 4x4 my dad bought new
95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles
2002 2500HD 4x4 regular cab 6.0L 67k miles
2002 2500HD 4x4 regular cab 8.1L 28k miles
2003 GMC 2500HD 4x4 regular cab Diesel 93k miles

67-72 Parts for sale
Joesjunk is offline   Reply With Quote
Old 07-04-2012, 03:39 PM   #5
SS Tim
Registered User
 
SS Tim's Avatar
 
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,503
Re: newbie here. 4x4 frame question.

Quote:
Originally Posted by Joesjunk View Post
I sure wouldnt remove anything that is riveted on.......
X2, Rivets and bolts don't just interchange under shear loads. Grade, type, size, and material are all factors. If this is foreign to you, then your best bet would be to check the bare frame X,Y and Z axis. True and repair as needed then blast and prime it.
SS Tim is offline   Reply With Quote
Old 07-05-2012, 05:46 PM   #6
bowhunter65
Registered User
 
Join Date: Jun 2012
Location: saint charles missouri
Posts: 97
Re: newbie here. 4x4 frame question.

Its got some pretty bad rust,in a couple areas. those parts are gonna have to be replaced. I suppose I could just replace those parts. using grade 8 steel bolts with lock washers and loc-tite. I just know theres rust behind those riveted parts, that the blaster cant get to. Thanks For Your opinions
bowhunter65 is offline   Reply With Quote
Old 07-05-2012, 05:56 PM   #7
70cst
Senior Member
 
70cst's Avatar
 
Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,373
Re: newbie here. 4x4 frame question.

Hey bowhunter65

to your new internet truck family and from Ohio.

Best of luck as you do your rebuild and don't forget we luv pics
__________________
A husband can be right...or...A husband can be happy.

67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk.

1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc

JOHN 17:3...The better side of "LIFE"


Remember: Everyday is a good day...Some are just gooder!
70cst is offline   Reply With Quote
Old 07-05-2012, 06:19 PM   #8
bowhunter65
Registered User
 
Join Date: Jun 2012
Location: saint charles missouri
Posts: 97
Re: newbie here. 4x4 frame question.

hey 70cst Thanks for the warm welcome. I made a rookie mistake. didnt take any pictures before starting the tear down. I have taken many Since Then. Will have to get the wife involved as I am computer stupid.
bowhunter65 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:54 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com