The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-15-2012, 11:51 AM   #1
blackdawg
Blackdawg
 
Join Date: Aug 2010
Location: North Delta ,British Columbia
Posts: 213
automatic transmission not engaging

I had my turbo 400 rebuilt a while back.finally got everything in.the problem i"m having is the transmission is not engaging.I had a transmission leak from the line that was dropping a bunch of fluid.I have tightened that up as well as the pan bolts.the vacuam line is running from the modulater to a port on my edelbrock carb.the sensor which i guess would be for transmission pressure is not hooked up.I topped the tranny up last week and left it after chasing leaks.so this morning i will start the truck and make sure the level is up.what else can i check for if this thing doesn"t move getting very frusterated.truck is a 1966 chevy stepside with a 350 and turbo 400 with b&m shift kit.thanks
__________________
LIFE NEEDS NO RED LIGHTS !!

1966 chevy stepside. Aka Bella.
1998 chevy s-10 4x4 daily driver.

my build thread http://67-72chevytrucks.com/vboard/s...d.php?t=467164
blackdawg is offline   Reply With Quote
Old 07-15-2012, 07:40 PM   #2
fleetman
Registered User
 
Join Date: May 2010
Location: dunedin, fl
Posts: 173
Re: automatic transmission not engaging

Quote:
Originally Posted by blackdawg View Post
I had my turbo 400 rebuilt a while back.finally got everything in.the problem i"m having is the transmission is not engaging.I had a transmission leak from the line that was dropping a bunch of fluid.I have tightened that up as well as the pan bolts.the vacuam line is running from the modulater to a port on my edelbrock carb.the sensor which i guess would be for transmission pressure is not hooked up.I topped the tranny up last week and left it after chasing leaks.so this morning i will start the truck and make sure the level is up.what else can i check for if this thing doesn"t move getting very frusterated.truck is a 1966 chevy stepside with a 350 and turbo 400 with b&m shift kit.thanks
get one of those turbo 400 transmission books. they are invaluable. they have a great diagnostic/troubleshoot section. try barnes and noble or amazon if you want to get it.
but you are on the right track to hunt down your problem. it will always slip if you are seriously a leaker. also any vacuum leak to the trans will cause it to slip or not work. neutral switchs can problem sometimes. i assume you checked that linkage is working proper. closely inspect for any obvious problems.
hth
fleetman is offline   Reply With Quote
Old 07-15-2012, 07:43 PM   #3
blackdawg
Blackdawg
 
Join Date: Aug 2010
Location: North Delta ,British Columbia
Posts: 213
Re: automatic transmission not engaging

actually i was able to move it this afternoon.runs very rough right now.Going to have a buddy of mine set her up a bit.But drove her it was very exciting drove like a bucket of bolt but it nice to see her move.
__________________
LIFE NEEDS NO RED LIGHTS !!

1966 chevy stepside. Aka Bella.
1998 chevy s-10 4x4 daily driver.

my build thread http://67-72chevytrucks.com/vboard/s...d.php?t=467164
blackdawg is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:59 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com