Project: "Full Metal Yellow Jacket" Build Thread - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1Bad62Pro/Street · 07-31-2012, 09:28 AM

Well Bud,

No updates but heart aches..

It seems my transmission needs to be rebuilt.

http://www.youtube.com/watch?v=v3VCl3yBURs

So now its who I can trust to rebuild it and rebuild it right or just buy a new one with a warranty.
The transmission came out of a 1970 Chevrolet C-10 or a C-20 Custom Camper Special Long Wheel Base Pickup my dad had at the time.

So checked with Jegs and Summit and it seems Summit is cheaper on shipping.
JEGS Performance Products 60300 - $792.98
http://www.jegs.com/i/JEGS-Performan...oductId=750882

(Short 6" Tail Shaft)
Summit Racing SUM-700300 - $771.90
http://www.summitracing.com/parts/SUM-700300/
(Truck Freight: Terminal Pickup)
Summit® transmissions have been remanufactured with all-new clutches, kevlar band, seals, bushings, and thrust washers, plus a brand-new performance separator plate. Other features include a rebuilt front pump, a recalibrated manual/automatic valve body, and high-quality seals and gaskets. You get all these quality upgrades, plus reliable performance that can handle up to 450 hp.

I got a new Summit Racing Trans Pan that will match.
Anyhoot she will be down untill I get the new trans.
I just dread taking the old trans out and installing the new one in.
All I have is jack stands.... and the truck is low

Cool videos:

Flexplate - How Flexplates Work vs Flywheel ...

Extend Transmission Life With TCI® Products \|...

66-PMD-GMC · 07-31-2012, 03:03 PM

Quote:

Originally Posted by 1Bad62Pro/Street

No updates but heart aches..

It seems my transmission needs to be rebuilt.
So now its who I can trust to rebuild it and rebuild it right or just buy a new one with a warranty.

I know you didn't ask but here is a word of advice...
TH400....

I don't care what anyone says, the TH350 can not match a solid TH400 in any way, shape or form....
Nearly $800 should get you a nice beefed up 400, matching driveshaft and the better 1st gear...
TH400 would be a win win win proposition in every way...
I have a Chevy TH400 outside in the build area that I paid $400 for, came with a 1 year warranty AND has been beefed up to handle anything any small block can throw at it...
So check around bud... seriously...
Just my 2 pennies worth

1Bad62Pro/Street · 07-31-2012, 04:29 PM

Yea, I know. You see'em in alot in Big Blocks too.
They are supremely durable and hold up better under alot of torque.
Well if I did go with a TH400 I would have to change the crossmember.
Right now I just don't wanna change anymore stuff on my truck right now.
TH350 will be fine for her. I'll hang on to the old trans because it's a heavy duty TH350 out of a truck. I also need to get a new radiator. The one I have now is ok but it's a matter of time when it's gonna rust trough at the bottom. I had it re-cored years ago. Money is tight right now and I have to watch the green stamps. I am gonna have positive traction on her one day. Got to get the bed done, Cadillac lights frenged in, doors fixed, new wiring, inner fender wells, tilt steering, and a few others before she is ready for paint. I want to make sure everything is done and fully operational before she's painted. Because after she's painted I just want to drive her and that's it.

No more working on her. Ha ha

Yea, that will never happen.

So now for the rest of the year we will drive dads car to the shows.
Gives me a chance to drive her... teehee. I love driving it when pops lets me.
By the way she gets 5 miles to the gallon tacking 3,000 rpm @ 55mph

66-PMD-GMC · 07-31-2012, 06:02 PM

Quote:

Originally Posted by 1Bad62Pro/Street

Well if I did go with a TH400 I would have to change the crossmember.
Right now I just don't wanna change anymore stuff on my truck right now.
TH350 will be fine for her.

Mine was only advise.
Not sure why you would need to change the cross member???
You move it back a few inches and bolt her in.. and with the trans already out, a slightly shorter driveshaft.
Personally I wouldn't pay 800 cents for a TH350. With big rear tires and the other stresses they just won't live.
I had a 350 behind my 400 pontiac.. lasted 3 runs and broke.. dumped $400 into it and it lasted 9 more runs and broke. TH350's are never an option in any V8 build I do. Maybe a 6 cylinder.
BUT!
It's your rig my friend... build it your way..

1Bad62Pro/Street · 07-31-2012, 09:28 PM

Quote:

Originally Posted by 66-PMD-GMC

Mine was only advise.
Not sure why you would need to change the cross member???
You move it back a few inches and bolt her in.. and with the trans already out, a slightly shorter driveshaft.
Personally I wouldn't pay 800 cents for a TH350. With big rear tires and the other stresses they just won't live.
I had a 350 behind my 400 pontiac.. lasted 3 runs and broke.. dumped $400 into it and it lasted 9 more runs and broke. TH350's are never an option in any V8 build I do. Maybe a 6 cylinder.
BUT!
It's your rig my friend... build it your way..

No problem Bud.
My cross member is welded in.
Posted via Mobile Device

1Bad62Pro/Street · 08-29-2012, 09:24 AM

Think I'm going to go with this paint scheme...
Have some air brushing added to her as well.
I may do my own outline of the flames.
If I do I will take pics or videos.
White to yellow to orange to red with some blue and white.
Thinking Glossy Black with Glossy Flames.
Match-Tip flame style is my favorite.
Not that I don't like flat or suede paint. Kinda growing on me.
I not set in stone with this.... Still like my Bright Yellow with flames!
What do you guys think????

Yellow with Flames or Black with Flames?
http://67-72chevytrucks.com/vboard/s...d.php?t=539465

Fast Freddy Bad-Ass Pickup Truck, Pro Mod 2012 -...

Fast Freddy , First run 2012, In&Outside...

Worlds Fastest Pickup truck! - Fast Freddy -...

1Bad62Pro/Street · 10-31-2012, 10:00 PM

Well seeing everyone working on their trucks here lately made me do a little tinkering while she's down.

1Bad62Pro/Street · 10-31-2012, 10:01 PM

Last pic.

1Bad62Pro/Street · 11-01-2012, 02:44 PM

A few more today...
I'm using Cold Drawn Steel. All steel used on my truck is Cold Drawn Steel.
Will add more of the progress later.

1Bad62Pro/Street · 11-02-2012, 09:10 AM

Lil' more work yesterday.

1Bad62Pro/Street · 11-02-2012, 09:13 AM

Continued.

1Bad62Pro/Street · 11-02-2012, 09:20 AM

Continued.

1Bad62Pro/Street · 11-02-2012, 02:29 PM

Continuation from today.

1Bad62Pro/Street · 11-02-2012, 02:39 PM

More.

1Bad62Pro/Street · 11-02-2012, 02:55 PM

Last ones:

McMurphy · 11-02-2012, 03:00 PM

I am so going to do some of this to my rig... hope you dont mind.
You didnt copyright this did you?

1Bad62Pro/Street · 11-02-2012, 03:11 PM

Quote:

Originally Posted by McMurphy

I am so going to do some of this to my rig... hope you dont mind.
You didnt copyright this did you?

Ha ha... Nope.
Thanks Bud.

1Bad62Pro/Street · 11-02-2012, 03:17 PM

http://www.customclassic.com/products/lights/caddy.htm

1Bad62Pro/Street · 11-07-2012, 10:49 AM

American Muscle Car Episode: Ram Air! -...

1Bad62Pro/Street · 11-13-2012, 11:46 AM

Finished and got'er all primer'ed up!

1Bad62Pro/Street · 11-13-2012, 12:07 PM

More

1Bad62Pro/Street · 11-13-2012, 12:14 PM

Last ones:
When ever I install the Caddy lights she will look even better.
But for now she will stay like this.
Oh yes..... The tailgate
Well you will have to wait and find out how I will do that!

66-PMD-GMC · 11-13-2012, 03:47 PM

1Bad62Pro/Street · 11-13-2012, 05:08 PM

Quote:

Originally Posted by 66-PMD-GMC

Thanks Bud!

She's ready for Hibernation now till Spring.

1Bad62Pro/Street · 11-14-2012, 05:01 PM

Old School Cool

TDR Vintage Drag Racing 60's-70's Thompson...

07-31-2012, 04:29 PM	#278
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Project: "Full Metal Yellow Jacket" Build Thread Yea, I know. You see'em in alot in Big Blocks too. They are supremely durable and hold up better under alot of torque. Well if I did go with a TH400 I would have to change the crossmember. Right now I just don't wanna change anymore stuff on my truck right now. TH350 will be fine for her. I'll hang on to the old trans because it's a heavy duty TH350 out of a truck. I also need to get a new radiator. The one I have now is ok but it's a matter of time when it's gonna rust trough at the bottom. I had it re-cored years ago. Money is tight right now and I have to watch the green stamps. I am gonna have positive traction on her one day. Got to get the bed done, Cadillac lights frenged in, doors fixed, new wiring, inner fender wells, tilt steering, and a few others before she is ready for paint. I want to make sure everything is done and fully operational before she's painted. Because after she's painted I just want to drive her and that's it. No more working on her. Ha ha Yea, that will never happen. So now for the rest of the year we will drive dads car to the shows. Gives me a chance to drive her... teehee. I love driving it when pops lets me. By the way she gets 5 miles to the gallon tacking 3,000 rpm @ 55mph __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

10-31-2012, 10:00 PM	#282
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Project: "Full Metal Yellow Jacket" Build Thread Well seeing everyone working on their trucks here lately made me do a little tinkering while she's down. Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

10-31-2012, 10:01 PM	#283
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Project: "Full Metal Yellow Jacket" Build Thread Last pic. Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

11-01-2012, 02:44 PM	#284
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Project: "Full Metal Yellow Jacket" Build Thread A few more today... I'm using Cold Drawn Steel. All steel used on my truck is Cold Drawn Steel. Will add more of the progress later. Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

11-02-2012, 09:10 AM	#285
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Project: "Full Metal Yellow Jacket" Build Thread Lil' more work yesterday. Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

11-02-2012, 09:13 AM	#286
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Project: "Full Metal Yellow Jacket" Build Thread Continued. Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

11-02-2012, 09:20 AM	#287
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Project: "Full Metal Yellow Jacket" Build Thread Continued. Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

11-02-2012, 02:29 PM	#288
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Project: "Full Metal Yellow Jacket" Build Thread Continuation from today. Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

11-02-2012, 02:39 PM	#289
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Project: "Full Metal Yellow Jacket" Build Thread More. Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

11-02-2012, 02:55 PM	#290
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Project: "Full Metal Yellow Jacket" Build Thread Last ones: Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

11-02-2012, 03:00 PM	#291
McMurphy Registered User Join Date: Sep 2011 Location: Tacoma, WA Posts: 2,425	Re: Project: "Full Metal Yellow Jacket" Build Thread I am so going to do some of this to my rig... hope you dont mind. You didnt copyright this did you? __________________ Michael McMurphy My 66 Stepside My 64 Tow Truck My 66 Tempest Table Of Contents Added to Page1

11-02-2012, 03:17 PM	#293
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Project: "Full Metal Yellow Jacket" Build Thread http://www.customclassic.com/products/lights/caddy.htm __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. Last edited by 1Bad62Pro/Street; 12-18-2012 at 09:17 AM.

11-13-2012, 11:46 AM	#295
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Project: "Full Metal Yellow Jacket" Build Thread Finished and got'er all primer'ed up! Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

11-13-2012, 12:07 PM	#296
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Project: "Full Metal Yellow Jacket" Build Thread More Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

11-13-2012, 12:14 PM	#297
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Project: "Full Metal Yellow Jacket" Build Thread Last ones: When ever I install the Caddy lights she will look even better. But for now she will stay like this. Oh yes..... The tailgate Well you will have to wait and find out how I will do that! Attached Images __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.



Register or Log In To remove these advertisements.

11-13-2012, 03:47 PM	#298
66-PMD-GMC The 60-66 GMC/Pontiac guy.... Join Date: Oct 2010 Location: Apache Junction, Arizona Posts: 1,306	Re: Project: "Full Metal Yellow Jacket" Build Thread __________________ Building Genuine Pontiac Firepowered cars and trucks for several decades. Why Pontiac?? That's just me daring to be different. Projects.. 63 C10 Short Wheel Base fleetside (The Pro-Street) currently under reconstruction. 440CID 2X4 Pontiac

Register or Log In To remove these advertisements.