Another Cab Mount Question; How many are there? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TIMSPEED · 10-07-2003, 08:03 AM

Are there only two cab mounts? (One on each side; outside the framerail, just under the doors.) My gf's dad said it's EASY to replace cab mounts, and from the looks of it, there's only two!
But I think I remember someone saying, each side has two bushings...an upper and a lower. Is this correct?

bigblock73 · 10-07-2003, 08:07 AM

There are four, two in front and two in the rear...I believe there are a total of eight bushings (2 for each mount) though.

-Jeff

TIMSPEED · 10-07-2003, 08:14 AM

Where are the other two? Under the radiator??

bigblock73 · 10-07-2003, 08:25 AM

the two in front are right about where your feet rest (one on the left, the other on the right), and the two in the rear are at the very back of the cab (in the same location as the front).

Crawl under and have a peek...the bolts bolt from under the cab and thread into the cab thru the bushings.

-Jeff

TIMSPEED · 10-07-2003, 08:32 AM

Hmm ok..hopefully this fix my CRAPPY ride, as well as my leaning problem.
But then I'll have a new problem..I'll have to drop the front another inch or so

**Captkaos** · 10-07-2003, 09:50 AM

Quote:

Originally posted by bigblock73
the two in front are right about where your feet rest (one on the left, the other on the right), and the two in the rear are at the very back of the cab (in the same location as the front).

Actually, the 2 rear ones are on the inside of the framerail whereas the front is on the outside of the framerail.
here is a pic from the front. The first set outiside the framerail and in front of the crossmemeber is the core support, the second set outside framerail and behind the crossmember is the front cab mount, and the one in front of the rear crossmember and inside the framerail is the rear cab mount.

If you are replacing the cab bushings, you need to replace the core support bushings. Unless you replace them with rubber, you ride quality will be STIFFER.

Low87on20s · 10-07-2003, 05:26 PM

not to hi-jack a thread, but how much (in inches) would bad/failing cab mounts cause a truck to lean?

**Captkaos** · 10-07-2003, 05:47 PM

No more than about 1/2" I would say (PICKUPs). Typically the top bushing is about 3/4" tall, and it has a 1/4" Washer/support cup holding it on the later models.

TIMSPEED · 10-07-2003, 05:53 PM

Quote:

Originally posted by Captkaos
No more than about 1/2" I would say (PICKUPs). Typically the top bushing is about 3/4" tall, and it has a 1/4" Washer/support cup holding it on the later models.

Ehh..I think mine's actually leaning about 3/4"...I'll let yall know after I replace my bushings...

TIMSPEED · 10-07-2003, 05:57 PM

So the mounts are only located, where the arrows are pointing, right?

Low87on20s · 10-07-2003, 06:01 PM

Hey TIMSPEED, is your truck leaning on the passenger side or the driver side? I guess if it was both, you either couldn't tell or wouldn't care unless the ride was just that bad?

bigblock73 · 10-07-2003, 06:09 PM

Quote:

Originally posted by TIMSPEED
So the mounts are only located, where the arrows are pointing, right?

No, the very front ones are the core support mounts. Look at mine, you can see the front ones right behind the engine (outside of frame), and the rear ones are further back inside the frame.

Hope this helps.

BTW - Chris, your rear mounts look waaaaay too far back in the pic...do you have a limo or something?? Just kiddin, probabally just the way the photo turned out.

-Jeff

Low87on20s · 10-07-2003, 06:15 PM

Quote:

Originally posted by bigblock73

BTW - Chris, your rear mounts look waaaaay too far back in the pic...do you have a limo or something?? Just kiddin, probabally just the way the photo turned out.

-Jeff

I was thinking it was a frame for a crew-cab short bed.

TIMSPEED · 10-07-2003, 06:22 PM

Well, I went out and snapped a picture of my cab mounts (directly under the sides of the cab) Here's what they look like...
Is there any EASY way to get to the rear cab mounts, without taking the bed off??
Also, (last question, I promise) I just take out this big bolt going through the bushing, then jack up the cab, and slide out the old bushings and in the new, right?

bigblock73 · 10-07-2003, 06:26 PM

Quote:

Originally posted by TIMSPEED
Well, I went out and snapped a picture of my cab mounts (directly under the sides of the cab) Here's what they look like...
Is there any EASY way to get to the rear cab mounts, without taking the bed off??
Also, (last question, I promise) I just take out this big bolt going through the bushing, then jack up the cab, and slide out the old bushings and in the new, right?

You shouldn't need to touch the bed, the mounts are directly below the rear of the cab.

Yes, remove the bolt, jack up the cab a little, remove the old mounts. The bolts might be stubborn, lots of weight, stress, and years on them.

BTW - your bushings don't look too bad.

-Jeff

*1FaastC10* · 10-07-2003, 06:32 PM

Jeff, you have to consider that those are the lower bushings he's showing, so they're not bearing any weight. i bet the top ones are smooshed to hell.

BaggedC10 · 10-07-2003, 09:56 PM

TIMSPEED, bring your truck up to my place and I'll replace them. I'm installing PST ones on my truck because otherwise, they'll just sit in the box. You can also get your leaf springs.....for free.

TIMSPEED · 10-07-2003, 10:38 PM

Quote:

Originally posted by BaggedC10
You can also get your leaf springs.....for free.

DAMN! I'M THERE!

BaggedC10 · 10-07-2003, 10:47 PM

Quote:

Originally posted by TIMSPEED
DAMN! I'M THERE!

I am being serious too.

PM me if you are interested in doing that.

MylilBowTie · 10-08-2003, 02:42 PM

I want pictures removal and instaltion

I will need to do this also sooner or later!!

Do you think we should start some tech articles? On things like this?

10-07-2003, 08:03 AM	#1
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Another Cab Mount Question; How many are there? Are there only two cab mounts? (One on each side; outside the framerail, just under the doors.) My gf's dad said it's EASY to replace cab mounts, and from the looks of it, there's only two! But I think I remember someone saying, each side has two bushings...an upper and a lower. Is this correct? __________________ I have a few cars... See Them Here

10-07-2003, 08:14 AM	#3
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Where are the other two? Under the radiator?? __________________ I have a few cars... See Them Here

10-07-2003, 08:32 AM	#5
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Hmm ok..hopefully this fix my CRAPPY ride, as well as my leaning problem. But then I'll have a new problem..I'll have to drop the front another inch or so __________________ I have a few cars... See Them Here

10-07-2003, 05:26 PM	#7
Low87on20s Live from Atlanta Join Date: May 2003 Location: Atlanta, GA Posts: 511	not to hi-jack a thread, but how much (in inches) would bad/failing cab mounts cause a truck to lean? __________________ Paul

10-07-2003, 05:47 PM	#8
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	No more than about 1/2" I would say (PICKUPs). Typically the top bushing is about 3/4" tall, and it has a 1/4" Washer/support cup holding it on the later models. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

10-07-2003, 08:07 AM	#2
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	There are four, two in front and two in the rear...I believe there are a total of eight bushings (2 for each mount) though. -Jeff

10-07-2003, 08:25 AM	#4
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	the two in front are right about where your feet rest (one on the left, the other on the right), and the two in the rear are at the very back of the cab (in the same location as the front). Crawl under and have a peek...the bolts bolt from under the cab and thread into the cab thru the bushings. -Jeff

10-07-2003, 05:57 PM	#10
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	So the mounts are only located, where the arrows are pointing, right? Attached Images __________________ I have a few cars... See Them Here

10-07-2003, 06:01 PM	#11
Low87on20s Live from Atlanta Join Date: May 2003 Location: Atlanta, GA Posts: 511	Hey TIMSPEED, is your truck leaning on the passenger side or the driver side? I guess if it was both, you either couldn't tell or wouldn't care unless the ride was just that bad? __________________ Paul

10-07-2003, 06:22 PM	#14
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Well, I went out and snapped a picture of my cab mounts (directly under the sides of the cab) Here's what they look like... Is there any EASY way to get to the rear cab mounts, without taking the bed off?? Also, (last question, I promise) I just take out this big bolt going through the bushing, then jack up the cab, and slide out the old bushings and in the new, right? Attached Images __________________ I have a few cars... See Them Here

10-07-2003, 06:32 PM	#16
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	Jeff, you have to consider that those are the lower bushings he's showing, so they're not bearing any weight. i bet the top ones are smooshed to hell.

10-07-2003, 09:56 PM	#17
BaggedC10 Under construction! Join Date: Aug 2002 Location: NorCal Posts: 1,065	TIMSPEED, bring your truck up to my place and I'll replace them. I'm installing PST ones on my truck because otherwise, they'll just sit in the box. You can also get your leaf springs.....for free. __________________ 2001 Silverado bagged on 22's. Sold

10-08-2003, 02:42 PM	#20
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	I want pictures removal and instaltion I will need to do this also sooner or later!! Do you think we should start some tech articles? On things like this? __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.