Reveille - Questions..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DevilDog Aggie · 08-03-2012, 09:36 AM

Here is the SPID from her. Apparently the previous owner updated her to electronic ignition. Included a pic of the distributer cap/rotor. It was worn to crap. Replaced plugs/wires etc. Planned on replacing cap/rotor/coil etc, but not 100% sure where to proceed to find replacements for what is installed. Main goal right now is to get it in decent running order then go from there. Also need to replace the trans filters and gaskets. I'm pretty sure I have the turbo 400 trans based on the SPID (M49). The cover based on what I've read fits that description (Longer than wide). Although, I have seen other threads where M49 could be the 350 as well.

Any help you folks could give would be great!!!

Robert

CC69Rat · 08-03-2012, 09:52 AM

13 bolts on the trans pan?

turp mcspray · 08-03-2012, 09:59 AM

TH400 pan, kinda looks like Texas.

bonnieclyde100 · 08-03-2012, 10:19 AM

the cap and rotor is from any mid 80's chevy truck HEI

DevilDog Aggie · 08-03-2012, 10:21 AM

Thanks gentlemen! I had seen the TX shape comment before too. That is based on the back end shape of the pan correct? Added some pics I took this morning before I left for work. Not great I know.

I'm at work now, but I'll see if I can't talk my wife into climbing under her to count the bolts on the pan! Hopefully she loves me that much!

Rob

CC69Rat · 08-03-2012, 10:23 AM

Naa man .. don't do that. Just check when you get home.

DevilDog Aggie · 08-03-2012, 11:46 AM

LOL!! Apparently she does love me!!! She looked but couldn't figure it out. Filter's and gasket's are cheap, so I asked her to pick up both and I'll return the one I don't need.

On the other note, what about the Dist Cap/Rotor/Condenser etc.. Any thoughts? Calling my local parts guy that I trust/know, but wanted some other opinions!

Thanks again!

Rob

CC69Rat · 08-03-2012, 11:51 AM

There is no way my wife would ever crawl under my truck. Not happenin. That's funny man.

DevilDog Aggie · 08-03-2012, 12:33 PM

I honestly didn't think she would either!!!

bonnieclyde100 · 08-03-2012, 12:44 PM

cap and rotor are from any mid 80's chevy truck HEI

DevilDog Aggie · 08-03-2012, 02:30 PM

Quote:

Originally Posted by bonnieclyde100

the cap and rotor is from any mid 80's chevy truck HEI

Thanks!!!!

PanelDeland · 08-03-2012, 03:37 PM

Quote:

Originally Posted by DevilDog Aggie

I honestly didn't think she would either!!!

Must be a Native Texan your wife I mean...

CC69Rat · 08-03-2012, 04:31 PM

My wife is Taiwanese and doesn't really understand why I'd even want to drive an old truck, much less pay big bucks for the parts to restore it. Where she grew up (Brazil) the cars get old and they just stack them up. Mostly VW Bugs..

She just let's me do whatever but there is no way she'd ever crawl under it .. she's a keeper man!

brianthelion02 · 08-03-2012, 06:09 PM

Looks like t-350 to me

Posted via Mobile Device

brianthelion02 · 08-03-2012, 06:11 PM

Looks like t-350 to me

I just asked my wife if she would crawl under the truck and I did not even get a response,lol!
Posted via Mobile Device

black_sheep454 · 08-03-2012, 07:05 PM

Easiest way to tell on the trans is if it has a kick down cable it's a 350/ electric switch it's a 400
Posted via Mobile Device

DevilDog Aggie · 08-04-2012, 02:06 AM

Unfortunately it is a 350. Was really hoping it would be a 400. But oh, well. The good news is that she lives! :-) I'll post the video shortly. Nothing great, but she does sound good! Still have a little bit of an issue with dying while on a hill, but that may be a fuel pickup issue. I HOPE! :-)

cubber · 08-04-2012, 12:13 PM

Good morning, Miss Reveille, ma'am!!

DevilDog Aggie · 08-22-2012, 09:44 AM

Thx Cubber!!! She isn't too happy right now sitting on jack stands, but she will be rubber down tonight! :-)

GASoline71 · 08-22-2012, 10:40 AM

There's nothing wrong with a TH350. They are the bread and butter transmission that the General made. Probably more built than any other tranny in the GM line. I've built them from bone stock and also to handle over 400 HP.

The TH400 actually robs a bit of HP to turn it... it was designed to go behind big block engines.

Gary

DevilDog Aggie · 08-22-2012, 10:52 AM

Thanks for the info Gas! Just figured bigger is always better! :-)

Steve Hafner · 08-22-2012, 12:27 PM

. . . .

Another " Interesting " SPID . . .

It has the HIGHLANDER gray plaid seats . . .

The PA1 Deluxe wheel covers, found on a Highlander . . .

But doesn't list the YG6,7 or 8 "Spec Promotion Package".

. . . .

DevilDog Aggie · 08-22-2012, 12:49 PM

Quote:

Originally Posted by Steve Hafner

. . . .

Another " Interesting " SPID . . .

It has the HIGHLANDER gray plaid seats . . .

The PA1 Deluxe wheel covers, found on a Highlander . . .

But doesn't list the YG6,7 or 8 "Spec Promotion Package".

. . . .

Steve,

What do you mean "interesting"? The seat has been swapped and I don't have the wheel covers. What are the other packages you mentioned? Since I am a newbie to these, I want to learn as much as I can.

Thanks! Rob

Steve Hafner · 08-22-2012, 01:53 PM

Quote:

Originally Posted by DevilDog Aggie

Steve,

What do you mean "interesting"? The seat has been swapped and I don't have the wheel covers. What are the other packages you mentioned? Since I am a newbie to these, I want to learn as much as I can.

Thanks! Rob

Rob,

I'm certainly NOT an expert on the highlander . . . I only have the wheel covers on my C-10 . . . other people who will read this will tell you in more detail. It was a promotional package added towards the end of 1972 to help boost sales ( from what I've heard ) There were three different packages, A B C. Below, are pictures of some of the details in the packages and a picture of someone else's SPID with the package listed. I've seen at least one more SPID like yours on this website ( didn't list any packages, but had the plaid seat or wheel covers etc ) That's what I meant by "interesting" !!!

Steve H.

. . . .

DevilDog Aggie · 08-22-2012, 02:19 PM

Quote:

Originally Posted by Steve Hafner

Rob,

I'm certainly NOT an expert on the highlander . . . I only have the wheel covers on my C-10 . . . other people who will read this will tell you in more detail. It was a promotional package added towards the end of 1972 to help boost sales ( from what I've heard ) There were three different packages, A B C. Below, are pictures of some of the details in the packages and a picture of someone else's SPID with the package listed. I've seen at least one more SPID like yours on this website ( didn't list any packages, but had the plaid seat or wheel covers etc ) That's what I meant by "interesting" !!!

Steve H.

. . . .

Cool! Thanks for the info. I did some googling, since I had not heard of the Highlander package. Even though it doesn't have the package listed, it does have all the options of the C package. Since I don't have the body molding, I can't be certain.

08-03-2012, 09:36 AM	#1
DevilDog Aggie Registered User Join Date: Jul 2012 Location: Mansfield, TX Posts: 147	Reveille - Questions..... Here is the SPID from her. Apparently the previous owner updated her to electronic ignition. Included a pic of the distributer cap/rotor. It was worn to crap. Replaced plugs/wires etc. Planned on replacing cap/rotor/coil etc, but not 100% sure where to proceed to find replacements for what is installed. Main goal right now is to get it in decent running order then go from there. Also need to replace the trans filters and gaskets. I'm pretty sure I have the turbo 400 trans based on the SPID (M49). The cover based on what I've read fits that description (Longer than wide). Although, I have seen other threads where M49 could be the 350 as well. Any help you folks could give would be great!!! Robert Attached Images

08-03-2012, 09:52 AM	#2
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,211	Re: Reveille - Questions..... 13 bolts on the trans pan? __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

08-03-2012, 09:59 AM	#3
turp mcspray Registered User Join Date: May 2007 Location: Rapid City South Dakota Posts: 2,359	Re: Reveille - Questions..... TH400 pan, kinda looks like Texas. __________________ Turp Mcspray New life for an old 2wd, farm blazer http://67-72chevytrucks.com/vboard/s...d.php?t=505987 My Blazer build http://67-72chevytrucks.com/vboard/s...d.php?t=342299

08-03-2012, 10:19 AM	#4
bonnieclyde100 Registered User Join Date: Jan 2012 Location: Henderson,TX Posts: 336	Re: Reveille - Questions..... the cap and rotor is from any mid 80's chevy truck HEI

08-03-2012, 10:21 AM	#5
DevilDog Aggie Registered User Join Date: Jul 2012 Location: Mansfield, TX Posts: 147	Re: Reveille - Questions..... Thanks gentlemen! I had seen the TX shape comment before too. That is based on the back end shape of the pan correct? Added some pics I took this morning before I left for work. Not great I know. I'm at work now, but I'll see if I can't talk my wife into climbing under her to count the bolts on the pan! Hopefully she loves me that much! Rob Attached Images

08-03-2012, 10:23 AM	#6
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,211	Re: Reveille - Questions..... Naa man .. don't do that. Just check when you get home. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

08-03-2012, 11:46 AM	#7
DevilDog Aggie Registered User Join Date: Jul 2012 Location: Mansfield, TX Posts: 147	Re: Reveille - Questions..... LOL!! Apparently she does love me!!! She looked but couldn't figure it out. Filter's and gasket's are cheap, so I asked her to pick up both and I'll return the one I don't need. On the other note, what about the Dist Cap/Rotor/Condenser etc.. Any thoughts? Calling my local parts guy that I trust/know, but wanted some other opinions! Thanks again! Rob

08-03-2012, 11:51 AM	#8
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,211	Re: Reveille - Questions..... There is no way my wife would ever crawl under my truck. Not happenin. That's funny man. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

08-03-2012, 12:33 PM	#9
DevilDog Aggie Registered User Join Date: Jul 2012 Location: Mansfield, TX Posts: 147	Re: Reveille - Questions..... I honestly didn't think she would either!!!

08-03-2012, 12:44 PM	#10
bonnieclyde100 Registered User Join Date: Jan 2012 Location: Henderson,TX Posts: 336	Re: Reveille - Questions..... cap and rotor are from any mid 80's chevy truck HEI

08-03-2012, 04:31 PM	#13
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,211	Re: Reveille - Questions..... My wife is Taiwanese and doesn't really understand why I'd even want to drive an old truck, much less pay big bucks for the parts to restore it. Where she grew up (Brazil) the cars get old and they just stack them up. Mostly VW Bugs.. She just let's me do whatever but there is no way she'd ever crawl under it .. she's a keeper man! __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

08-03-2012, 06:09 PM	#14
brianthelion02 Overdrive club Join Date: Sep 2007 Location: apache junction, arizona Posts: 819	Re: Reveille - Questions..... Looks like t-350 to me Posted via Mobile Device __________________ 1971 c-10 1951 3100 chevy 1970 chevy c-30 Sold!

08-03-2012, 06:11 PM	#15
brianthelion02 Overdrive club Join Date: Sep 2007 Location: apache junction, arizona Posts: 819	Re: Reveille - Questions..... Looks like t-350 to me I just asked my wife if she would crawl under the truck and I did not even get a response,lol! Posted via Mobile Device __________________ 1971 c-10 1951 3100 chevy 1970 chevy c-30 Sold!

08-03-2012, 07:05 PM	#16
black_sheep454 Registered User Join Date: May 2011 Location: Lebanon, Mo. Posts: 1,315	Re: Reveille - Questions..... Easiest way to tell on the trans is if it has a kick down cable it's a 350/ electric switch it's a 400 Posted via Mobile Device __________________ 1968 chevy lwb, getting ready to join forces with the 70 gmc 1970 gmc swb, getting ready to be a 68 chevy swb 1971 gmc lwb 2500 2wd Sierra Grande 1988 chevy 1-ton crew cab 2wd waiting for a 12v cummins

08-04-2012, 02:06 AM	#17
DevilDog Aggie Registered User Join Date: Jul 2012 Location: Mansfield, TX Posts: 147	Re: Reveille - Questions..... Unfortunately it is a 350. Was really hoping it would be a 400. But oh, well. The good news is that she lives! :-) I'll post the video shortly. Nothing great, but she does sound good! Still have a little bit of an issue with dying while on a hill, but that may be a fuel pickup issue. I HOPE! :-)



Register or Log In To remove these advertisements.

08-04-2012, 12:13 PM	#18
cubber Registered User Join Date: Mar 2012 Location: Leanna, TN Posts: 2,061	Re: Reveille - Questions..... Good morning, Miss Reveille, ma'am!! __________________ =MATTHEW 69 Stepper...Stroked & Bagged GONE BUT NOT FORGOTTEN 2003 Chevrolet Z71 Ext. Cab 1995 Cavalier gas saver!

08-22-2012, 09:44 AM	#19
DevilDog Aggie Registered User Join Date: Jul 2012 Location: Mansfield, TX Posts: 147	Re: Reveille - Questions..... Thx Cubber!!! She isn't too happy right now sitting on jack stands, but she will be rubber down tonight! :-) __________________ __________________ Rob '72 Chevy C-10 - 350-5.7/TH350/PS/PB/AC Build Thread - http://67-72chevytrucks.com/vboard/s...87#post5503187 Semper Fi and Gig'em Aggies!

08-22-2012, 10:52 AM	#21
DevilDog Aggie Registered User Join Date: Jul 2012 Location: Mansfield, TX Posts: 147	Re: Reveille - Questions..... Thanks for the info Gas! Just figured bigger is always better! :-) __________________ __________________ Rob '72 Chevy C-10 - 350-5.7/TH350/PS/PB/AC Build Thread - http://67-72chevytrucks.com/vboard/s...87#post5503187 Semper Fi and Gig'em Aggies!

08-22-2012, 12:27 PM	#22
Steve Hafner Registered User Join Date: Sep 2010 Location: Northport, Alabama Posts: 1,353	Re: Reveille - Questions..... . . . . Another " Interesting " SPID . . . It has the HIGHLANDER gray plaid seats . . . The PA1 Deluxe wheel covers, found on a Highlander . . . But doesn't list the YG6,7 or 8 "Spec Promotion Package". . . . . Attached Images

Register or Log In To remove these advertisements.