|
08-09-2012, 10:27 PM
|
#1 |
|
Registered User
Join Date: Jun 2012
Location: Birnamwood, Wisconsin
Posts: 178
|
Restoration Question
I know this is going to sound like a dumb question to a lot of you pros but i am completely new to this and i would love some advice. I recently got a 72 k20 to restore. We got it from an old friend and he had already done most of the frame work on it. We just want to know what everyone does before you go and get the truck painted? Do I have to strip all of the old paint off and do i need to strip all the wiring out of the entire truck? Any help is GREATLY appreciated! Thanks guys.
|
|
|
|
08-10-2012, 09:19 AM
|
#2 |
|
2WD Jimmy
 
Join Date: Mar 2005
Location: Davis County, Utah
Posts: 2,565
|
Re: Restoration Question
I personally would let the paint shop decide wheather it needs stripping, but do insist on an epoxy sealer coat before paint.
As to the wiring, if it were me, I would remove the wiring and get an American Autowire Classic update kit to replace the original, but if your wiring is good and not chopped up by previous owners, you might be ok. fwiw |
|
|
|
|
08-10-2012, 09:25 AM
|
#3 |
|
Senior Member
 
Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,373
|
Re: Restoration Question
Agreed with letting the Body Shop decide. They will remove what needs to be removed and since they have done this before...less chance of breaking parts or losing parts.
Good luck. Others?
__________________
A husband can be right...or...A husband can be happy.  67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk.  1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc   JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
