Bed seems crooked?

[jel111]

Hey all I have a ?- I have a 66 c-10 and it seems the bed is mounted crooked. I have looked at the mounts and it looks like they have no play. What makes me think that it is the bed thats crooked and not the cab is that obviously it doesnt line up with the rear tires. It is closer on the passenger side tire than the drivers side. Now I have looked at everything and it seems to me it has to be pushed over towards the passenger side to line up with the cab which would make the rear tire situation better as well. What could be the possibilities here? I know that could be a lot to type but I was thinking the shoes that the front of the bed could be leaning? Thanks everybody can't wait to hear from ya all!!!!!!

[badriand]

Just start measuring everything. Measure back of cab to front mounts and make sure they are the same / back to back mounts etc. Also make sure your rear end is center and panhard adjusted right. I spent a lot of time doing the exact thing. Also make your your bed is level / square and not twisted.
Posted via Mobile Device

[Rich 5150 69]

If you have lowered your truck you will need a adjustable panhard bar.....

[70cst]

Originally Posted by Rich 5150 69

If you have lowered your truck you will need a adjustable panhard bar.....

Good point