![]() |
![]() |
#1 |
Registered User
Join Date: Aug 2011
Location: Casper, WY
Posts: 20
|
Radiator Saddles
I recently replace the radiator in my '85 GMC 3500. I installed a new aluminum 4 core radiator from Champion that was supposed to be a direct replacement. The radiator is just a bit shorter that the stock one (about an inch) letting it sit loose when the top cover is installed. I took up the extra space with some rags so the new radiator can't move around. Does anyone know where I can buy some rubber saddles that are taller than stock? Champion didn't have any or any solutions to the problem.
|
![]() |
![]() |
![]() |
#2 |
BAD BOW-Silverado XST
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
|
Re: Radiator Saddles
Did you install a BB radiator bolt down bracket? SB used two seperate brackets. A BB bracket is a single large bracket. I think LMC still has them for $20. You can also buy the rubber upper and lower bushing from them too.
|
![]() |
![]() |
![]() |
#3 |
Robert Olson Transport
![]() Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,287
|
Re: Radiator Saddles
i had a similar situation and i wound up using some hold downs from a newer generation truck its been a while i forget what year but it was a chevy product
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Aug 2011
Location: Casper, WY
Posts: 20
|
Re: Radiator Saddles
|
![]() |
![]() |
![]() |
#5 |
78K & 79C Jimmys
Join Date: Nov 2009
Location: Ottawa Ont CANADA
Posts: 7,901
|
Re: Radiator Saddles
Ive added a small bit of rubber hose to wedge things before
take a 5/8ths hose as long as the saddle and wedge it in or cut a piece .5 inch out of the length
__________________
John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350 |
![]() |
![]() |
![]() |
Bookmarks |
|
|