SC wheel tubs, seat and more - The 1947 - Present Chevrolet & GMC Truck Message Board Network

red69ss · 08-15-2012, 06:36 PM

this is a nice set of wheel tubs, they have some dings and a couple of flange holes on each one is a little messed up, but other than that they are in great shape..............I want $80 for the set........local pick up only

red69ss · 08-15-2012, 06:40 PM

this seat is out of a 72 , it has a couple of small nicks in it and a small tear above the drivers side bracket (see pic). It would be great for a driver or to be recovered........I want $100 for it.......local only
SEAT SOLD

red69ss · 08-15-2012, 06:52 PM

I have a power steering set up brackets, hoses and pump. I had this truck running and didn't notice it leaking and it was working but not sure of true condition .....I'll take $40 for it......local pick up

PUMP SOLD

Second pic is of a 350 trans that was in same truck. it works but I know it needs a tailshaft bushing.....I want $50 for it ....local pick up

TRANS SOLD

I also have three drive shafts two came from a shortbed v8 three speed setup one is one piece the other two piece. I also have a two piece from a long bed v8 automatic set up.......I want $50 a piece for these......local only

ONE PIECE SHAFT SOLD Still have 2 for sale.

roushinator · 08-15-2012, 06:59 PM

I am looking for a 72 bench..... If you decide to ship i want it.

red69ss · 08-15-2012, 07:08 PM

I also have this set of rims and tires , they are 5 lug the chrome is flaking in some spots and the tires are dry. I have the caps......I want $50 for the set......local only
TIRES SOLD

red69ss · 08-15-2012, 07:15 PM

Quote:

Originally Posted by roushinator

I am looking for a 72 bench..... If you decide to ship i want it.

I don't want to ship at this time and I'm sure it would be very expensive. If I change my mind I'll let you know.

HotRod C/10 · 08-15-2012, 08:26 PM

intereste in SB auto driveshaft if you decide to ship and rhe pump

**richard2717** · 08-15-2012, 11:15 PM

I would be interested in wheel tubs if u decide to ship

**FLchevygrl** · 08-15-2012, 11:49 PM

hello,
If you change your mind and will ship the power steering setup. I'll take it..
And the bolts too.

thanks,
Betty

red69ss · 08-16-2012, 12:14 AM

Sorry guys don't really want to ship right now, if things change I will let you know.

Leroy-B1 · 08-16-2012, 08:06 AM

I'll take the transmission, power steering stuff and the one piece drive shaft for swb
Posted via Mobile Device

Leroy-B1 · 08-16-2012, 08:07 AM

May be interested in the wheels too need some rollers until I can order the ones I want
Posted via Mobile Device

red69ss · 08-16-2012, 01:06 PM

Quote:

Originally Posted by Leroy-B1

I'll take the transmission, power steering stuff and the one piece drive shaft for swb
Posted via Mobile Device

Ok they are all yours.

Quote:

Originally Posted by Leroy-B1

May be interested in the wheels too need some rollers until I can order the ones I want
Posted via Mobile Device

Let me know about these.

red69ss · 08-19-2012, 09:05 PM

ttt

502ms · 08-20-2012, 09:27 AM

How far is Lancaster from Atlanta, GA?
Posted via Mobile Device

red69ss · 08-20-2012, 09:43 AM

Quote:

Originally Posted by 502ms

How far is Lancaster from Atlanta, GA?
Posted via Mobile Device

according to yahoo maps about 4 hours.

red69ss · 08-23-2012, 07:55 PM

ttt

**daddymoo2** · 08-23-2012, 08:21 PM

Would the tilt column be for sale next to the drive shaft. Thanks
Posted via Mobile Device

red69ss · 08-23-2012, 09:59 PM

Quote:

Originally Posted by daddymoo2

Would the tilt column be for sale next to the drive shaft. Thanks
Posted via Mobile Device

yes, but I'm trying to sale local. It's in my other sale thread.

rico7769 · 08-23-2012, 10:34 PM

how's the springs in the seat? Is it a fold forward? I have one now but need a much better one that has foam that didn't get eaten by mice from the previous owner.lol
Also, I'm in Augusta GA. Where is Lancaster close to?

rico7769 · 08-23-2012, 10:42 PM

Looked it up on google maps and it looks like you aren't too far.

red69ss · 08-23-2012, 10:53 PM

Quote:

Originally Posted by rico7769

how's the springs in the seat? Is it a fold forward? I have one now but need a much better one that has foam that didn't get eaten by mice from the previous owner.lol
Also, I'm in Augusta GA. Where is Lancaster close to?

Quote:

Originally Posted by rico7769

Looked it up on google maps and it looks like you aren't too far.

As far as I know they are in good shape, I'll check them again. It is not a fold forward seat but it is in great shape.

496bb · 08-24-2012, 10:27 AM

If you change your mind about shipping the tubs let me know please, pm is best. thanks.

rico7769 · 08-24-2012, 08:43 PM

would you be willing to do 150.00 and meet me in Columbia, SC? Two and some change hours is a long way to drive my 15 mpg sequioa to get it.

red69ss · 08-24-2012, 09:55 PM

Quote:

Originally Posted by rico7769

would you be willing to do 150.00 and meet me in Columbia, SC? Two and some change hours is a long way to drive my 15 mpg sequioa to get it.

so you want to pay me $50 to meet you in columbia? I might could do that , what year is your truck? Do you know the brackets vary some through the years?

08-15-2012, 06:36 PM	#1
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	wheel tubs, seat and more this is a nice set of wheel tubs, they have some dings and a couple of flange holes on each one is a little messed up, but other than that they are in great shape..............I want $80 for the set........local pick up only Attached Images __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

08-15-2012, 06:40 PM	#2
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: wheel tubs, seat and more this seat is out of a 72 , it has a couple of small nicks in it and a small tear above the drivers side bracket (see pic). It would be great for a driver or to be recovered........I want $100 for it.......local only SEAT SOLD Attached Images __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein Last edited by red69ss; 10-13-2012 at 06:40 PM.

08-15-2012, 06:52 PM	#3
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: wheel tubs, seat and more I have a power steering set up brackets, hoses and pump. I had this truck running and didn't notice it leaking and it was working but not sure of true condition .....I'll take $40 for it......local pick up PUMP SOLD Second pic is of a 350 trans that was in same truck. it works but I know it needs a tailshaft bushing.....I want $50 for it ....local pick up TRANS SOLD I also have three drive shafts two came from a shortbed v8 three speed setup one is one piece the other two piece. I also have a two piece from a long bed v8 automatic set up.......I want $50 a piece for these......local only ONE PIECE SHAFT SOLD Still have 2 for sale. Attached Images __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein Last edited by red69ss; 08-19-2012 at 09:03 PM.

08-15-2012, 06:59 PM	#4
roushinator Registered User Join Date: Jul 2012 Location: Baton Rouge, LA Posts: 385	Re: wheel tubs, seat and more I am looking for a 72 bench..... If you decide to ship i want it.

08-15-2012, 07:08 PM	#5
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: wheel tubs, seat and more I also have this set of rims and tires , they are 5 lug the chrome is flaking in some spots and the tires are dry. I have the caps......I want $50 for the set......local only TIRES SOLD Attached Images __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein Last edited by red69ss; 10-13-2012 at 06:41 PM.

08-15-2012, 08:26 PM	#7
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: wheel tubs, seat and more intereste in SB auto driveshaft if you decide to ship and rhe pump __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

08-15-2012, 11:15 PM	#8
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,126	Re: wheel tubs, seat and more I would be interested in wheel tubs if u decide to ship __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

08-15-2012, 11:49 PM	#9
FLchevygrl Active Member Join Date: Mar 2012 Location: Sarasota,Fl Posts: 177	Re: wheel tubs, seat and more hello, If you change your mind and will ship the power steering setup. I'll take it.. And the bolts too. thanks, Betty

08-16-2012, 12:14 AM	#10
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: wheel tubs, seat and more Sorry guys don't really want to ship right now, if things change I will let you know. __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

08-16-2012, 08:06 AM	#11
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: wheel tubs, seat and more I'll take the transmission, power steering stuff and the one piece drive shaft for swb Posted via Mobile Device

08-16-2012, 08:07 AM	#12
Leroy-B1 Registered User Join Date: Dec 2010 Location: Mars Hill, NC Posts: 1,994	Re: wheel tubs, seat and more May be interested in the wheels too need some rollers until I can order the ones I want Posted via Mobile Device

08-19-2012, 09:05 PM	#14
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: wheel tubs, seat and more ttt __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

08-20-2012, 09:27 AM	#15
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: wheel tubs, seat and more How far is Lancaster from Atlanta, GA? Posted via Mobile Device __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

08-23-2012, 07:55 PM	#17
red69ss Burnouts are therapeutic Join Date: Jun 2007 Location: lancaster, south carolina Posts: 852	Re: wheel tubs, seat and more ttt __________________ 1969 CHEVELLE SS 1972 C10 ALMOST DAILY DRIVER 1968 C10 RUSTBUCKET (MISSION IMPOSSIBLE) 1972 PONTIAC LEMANS CONVERTIBLE (WIFE'S CAR) "My wife and I were happy for twenty years. Then we met." - Rodney Dangerfield "The difference between genius and stupidity is that genius has its limits." - Einstein

08-23-2012, 08:21 PM	#18
daddymoo2 Senior Member Join Date: Mar 2010 Location: union,ky Posts: 1,574	Re: wheel tubs, seat and more Would the tilt column be for sale next to the drive shaft. Thanks Posted via Mobile Device



Register or Log In To remove these advertisements.

08-23-2012, 10:34 PM	#20
rico7769 Hybrid67 Join Date: Jan 2009 Location: Martinez, GA Posts: 195	Re: wheel tubs, seat and more how's the springs in the seat? Is it a fold forward? I have one now but need a much better one that has foam that didn't get eaten by mice from the previous owner.lol Also, I'm in Augusta GA. Where is Lancaster close to? __________________ Keep em' Running! All show.....no go

08-23-2012, 10:42 PM	#21
rico7769 Hybrid67 Join Date: Jan 2009 Location: Martinez, GA Posts: 195	Re: wheel tubs, seat and more Looked it up on google maps and it looks like you aren't too far. __________________ Keep em' Running! All show.....no go

08-24-2012, 10:27 AM	#23
496bb Registered User Join Date: Jan 2012 Location: Birmingham AL Posts: 283	Re: wheel tubs, seat and more If you change your mind about shipping the tubs let me know please, pm is best. thanks.

08-24-2012, 08:43 PM	#24
rico7769 Hybrid67 Join Date: Jan 2009 Location: Martinez, GA Posts: 195	Re: wheel tubs, seat and more would you be willing to do 150.00 and meet me in Columbia, SC? Two and some change hours is a long way to drive my 15 mpg sequioa to get it. __________________ Keep em' Running! All show.....no go

Register or Log In To remove these advertisements.