Nobaddaze's 82 C10 Cruiser Build - Page 14 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

'82 steppin · 09-06-2012, 01:52 AM

Quote:

Originally Posted by Nobaddaze

please do? any obstacles i can avoid the better. Thanks again

I cant upload the pictures but I used the stock mounts and made full thread bolts to get it tighten as the stock bolts is half thread the core support is in the stock location
Posted via Mobile Device

breeze85cten · 09-06-2012, 03:01 AM

I forget what you said about your engine. Was it built internally? Looks awesome by the way. Cant wait to hear it rumble. I love the sound of a healthy carbed 350.

Nobaddaze · 09-06-2012, 11:10 AM

Quote:

Originally Posted by breeze85cten

I forget what you said about your engine. Was it built internally? Looks awesome by the way. Cant wait to hear it rumble. I love the sound of a healthy carbed 350.

nothing much internally except for the cam. stock bores on a fresh rebuild. should run ok but not going to be winning any races.

breeze85cten · 09-06-2012, 04:26 PM

Quote:

Originally Posted by Nobaddaze

nothing much internally except for the cam. stock bores on a fresh rebuild. should run ok but not going to be winning any races.

It loos awesome. Cant beat the sound of a carbed 350 with full exhaust!! Also check out my thread! just posted my new wheels!

Nobaddaze · 12-31-2012, 10:16 PM

got some work done this weekend. Got the truck out of the back yardand into the garage. pulled the cab and bed off. mounted the motor and put the tranny on the stand. i ordered a bunch of parts, (waterpump,balancer,shift kit, and some little stuff). Its a big motivator to see my motor in. Crossed a big milestone.

luifer76 · 12-31-2012, 10:37 PM

dude the frame is looking sick ......engine looks sexy... love it.

maxxxy · 01-10-2013, 11:32 PM

I have never taken the time to go all the way through this thread until now. Super sweet!

breeze85cten · 05-21-2013, 11:22 PM

Eric!!!! Where have you been!!?? So are you getting anything done??

Nobaddaze · 06-15-2013, 02:28 AM

unfortunately nothing lately...been so busy with other stuff, haven't had time.

Hook0215 · 06-16-2013, 02:23 AM

Dude, you are one talented sob........
Posted via Mobile Device

Nobaddaze · 06-21-2013, 08:52 PM

Thanks buddy
Posted via Mobile Device

Nobaddaze · 07-01-2013, 09:30 PM

ok guys, my loss is your gain. the truck is officially FOR SALE. as much as it hurts to get rid of it, hard times call for uneasy actions. the truck is exactly as it sits in the above pictures. all offers will be considered but please dont waste my time. i would love to see it go to a member who will treat it with the love that i did. even to buy it as a chassis for an already running driving truck would be a deal. please PM with any questions.

Nobaddaze · 07-01-2013, 09:32 PM

its going on craigslist in a couple days but i thought id give you guys a chance first, Thanks

zellway · 09-18-2013, 01:19 PM

Did you end up selling this? What brand headers did you use? The look clean! Great work on this project!

Nobaddaze · 09-20-2013, 10:20 PM

Quote:

Originally Posted by zellway

Did you end up selling this? What brand headers did you use? The look clean! Great work on this project!

thanks. nope havent sold it yet but it has taken a huge backseat to other stuff at the moment.

the hearders are flowtech

Nobaddaze · 09-20-2013, 10:24 PM

here is how she sits now, in my new shop

mcboomport · 09-27-2013, 12:07 AM

Right on! Congrats on the shop!

Nobaddaze · 10-01-2013, 09:28 PM

Quote:

Originally Posted by mcboomport

Right on! Congrats on the shop!

thanks man. hows your build coming?

dialric · 10-06-2013, 05:45 PM

still available to purchase?

Nobaddaze · 10-07-2013, 01:23 AM

Quote:

Originally Posted by dialric

still available to purchase?

pm sent, still available

mcboomport · 10-14-2013, 05:32 PM

I have been busy with two other projects, so I haven't touched the truck. I'm working on a GP styled RD400, and a 50 chevy coupe. I just got done putting dual carbs on the 50. I just took my RD frame into the powdercoaters. I'm about to sell the gold/white one to fund a motor/ tranny for the project though. Trying to thin the herd and dial in everything.

dialric · 10-15-2013, 02:15 PM

i sent u another p m

Redhouse · 12-01-2013, 01:19 PM

Did you end up selling it?

09-06-2012, 03:01 AM	#327
breeze85cten Registered User Join Date: Jul 2010 Location: Gilbert, AZ Posts: 162	Re: Nobaddaze's 82 C10 Cruiser Build I forget what you said about your engine. Was it built internally? Looks awesome by the way. Cant wait to hear it rumble. I love the sound of a healthy carbed 350.

12-31-2012, 10:16 PM	#330
Nobaddaze Registered User Join Date: Sep 2010 Location: Gilbert, Az Posts: 350	Re: Nobaddaze's 82 C10 Cruiser Build got some work done this weekend. Got the truck out of the back yardand into the garage. pulled the cab and bed off. mounted the motor and put the tranny on the stand. i ordered a bunch of parts, (waterpump,balancer,shift kit, and some little stuff). Its a big motivator to see my motor in. Crossed a big milestone. __________________ Hard work has a future payoff. Laziness pays off now. My Build

12-31-2012, 10:37 PM	#331
luifer76 Registered User Join Date: Jul 2010 Location: Southern California CA Posts: 1,088	Re: Nobaddaze's 82 C10 Cruiser Build dude the frame is looking sick ......engine looks sexy... love it. __________________ nOtHiNg LiKe ThE gOoD oLe ChEvYs....

01-10-2013, 11:32 PM	#332
maxxxy Registered User Join Date: Jul 2010 Location: Norman, Oklahoma Posts: 557	Re: Nobaddaze's 82 C10 Cruiser Build I have never taken the time to go all the way through this thread until now. Super sweet! __________________ Max Max's bagged 81 81 rcsb bagged, 22s, build in progress 09 ext cab, 24" U2's, DD sub/amp

05-21-2013, 11:22 PM	#333
breeze85cten Registered User Join Date: Jul 2010 Location: Gilbert, AZ Posts: 162	Re: Nobaddaze's 82 C10 Cruiser Build Eric!!!! Where have you been!!?? So are you getting anything done??

06-15-2013, 02:28 AM	#334
Nobaddaze Registered User Join Date: Sep 2010 Location: Gilbert, Az Posts: 350	Re: Nobaddaze's 82 C10 Cruiser Build unfortunately nothing lately...been so busy with other stuff, haven't had time. __________________ Hard work has a future payoff. Laziness pays off now. My Build

06-16-2013, 02:23 AM	#335
Hook0215 Registered User Join Date: Dec 2012 Location: Harahan, La. Posts: 54	Re: Nobaddaze's 82 C10 Cruiser Build Dude, you are one talented sob........ Posted via Mobile Device

06-21-2013, 08:52 PM	#336
Nobaddaze Registered User Join Date: Sep 2010 Location: Gilbert, Az Posts: 350	Re: Nobaddaze's 82 C10 Cruiser Build Thanks buddy Posted via Mobile Device __________________ Hard work has a future payoff. Laziness pays off now. My Build

07-01-2013, 09:30 PM	#337
Nobaddaze Registered User Join Date: Sep 2010 Location: Gilbert, Az Posts: 350	Re: Nobaddaze's 82 C10 Cruiser Build ok guys, my loss is your gain. the truck is officially FOR SALE. as much as it hurts to get rid of it, hard times call for uneasy actions. the truck is exactly as it sits in the above pictures. all offers will be considered but please dont waste my time. i would love to see it go to a member who will treat it with the love that i did. even to buy it as a chassis for an already running driving truck would be a deal. please PM with any questions. __________________ Hard work has a future payoff. Laziness pays off now. My Build

07-01-2013, 09:32 PM	#338
Nobaddaze Registered User Join Date: Sep 2010 Location: Gilbert, Az Posts: 350	Re: Nobaddaze's 82 C10 Cruiser Build its going on craigslist in a couple days but i thought id give you guys a chance first, Thanks __________________ Hard work has a future payoff. Laziness pays off now. My Build

09-18-2013, 01:19 PM	#339
zellway Registered User Join Date: Dec 2009 Location: Arizona City, AZ Posts: 747	Re: Nobaddaze's 82 C10 Cruiser Build Did you end up selling this? What brand headers did you use? The look clean! Great work on this project! __________________ ----------------------------------------------------------- Erik My 69 suburban http://67-72chevytrucks.com/vboard/s...d.php?t=530626 1970 C10 step Project Jiminy http://67-72chevytrucks.com/vboard/s...d.php?t=682647 RUST!? Thats just mother natures way of telling all of us.....MINE!!!!

09-20-2013, 10:24 PM	#341
Nobaddaze Registered User Join Date: Sep 2010 Location: Gilbert, Az Posts: 350	Re: Nobaddaze's 82 C10 Cruiser Build here is how she sits now, in my new shop __________________ Hard work has a future payoff. Laziness pays off now. My Build

09-27-2013, 12:07 AM	#342
mcboomport Registered User Join Date: Oct 2010 Location: Portland, OR Posts: 320	Re: Nobaddaze's 82 C10 Cruiser Build Right on! Congrats on the shop!

10-06-2013, 05:45 PM	#344
dialric Registered User Join Date: Nov 2008 Location: grand rapids michigan Posts: 324	Re: Nobaddaze's 82 C10 Cruiser Build still available to purchase?

10-14-2013, 05:32 PM	#346
mcboomport Registered User Join Date: Oct 2010 Location: Portland, OR Posts: 320	Re: Nobaddaze's 82 C10 Cruiser Build I have been busy with two other projects, so I haven't touched the truck. I'm working on a GP styled RD400, and a 50 chevy coupe. I just got done putting dual carbs on the 50. I just took my RD frame into the powdercoaters. I'm about to sell the gold/white one to fund a motor/ tranny for the project though. Trying to thin the herd and dial in everything.



Register or Log In To remove these advertisements.

10-15-2013, 02:15 PM	#347
dialric Registered User Join Date: Nov 2008 Location: grand rapids michigan Posts: 324	Re: Nobaddaze's 82 C10 Cruiser Build i sent u another p m

12-01-2013, 01:19 PM	#348
Redhouse Registered User Join Date: Jan 2012 Location: Roxboro NC Posts: 43	Re: Nobaddaze's 82 C10 Cruiser Build Did you end up selling it?

Register or Log In To remove these advertisements.