hello from Entwistle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67youngpup · 09-14-2012, 11:41 PM

Greetings from the tiny town of entwistle, somewhere in Alberta.
I'm new around here so this is me;
Steve, 21, recovering drug addict, new 67-72 addict (wicked trade if ya ask me)
I have a 67 gmc 910, 250 inline, fleetside, longbed
This project is going to take a while, I have a 2 year old boy and another one on the way, i'm a 2nd year electrician so money is tight.
Just want to thank you all for the vast knowledge floating around this board. It is incredible! Oh and I will through pictures on here tomorrow sometime.
Thanks, have a great night
Posted via Mobile Device
Posted via Mobile Device

knomadd · 09-15-2012, 12:04 AM

Lots of good info on here. You could spend months on here and not learn everything you can. Can't wait to see pics. Good luck with your build.

71sierragrande · 09-15-2012, 12:17 AM

Greetings from California. Always wanted to get up that way for a summer trip and check out the Banff area. Preferably on a road bike. Maybe someday... Have fun on the site, these guys know everything there is to know.

Good to have you on board, Tim

geezer#99 · 09-15-2012, 01:13 AM

Entwhistle! Isn't that 400 miles up the back end of nowhere Alberta. Right next to that other place Resume Speed!!
Sorry!! Just yankin' your chain.
I lived close to there for 40 years in Rocky Mountain House so I'm familiar with the country side.
My old truck I had a couple years ago was the same as yours. 67, long fleet and a 250.
It was somewhat rare being the 99th one built. Sold to a retired buddy in Langley.
Welcome to the forum!!

09-14-2012, 11:41 PM	#1
67youngpup Registered User Join Date: Sep 2012 Location: entwistle Posts: 2	hello from Entwistle Greetings from the tiny town of entwistle, somewhere in Alberta. I'm new around here so this is me; Steve, 21, recovering drug addict, new 67-72 addict (wicked trade if ya ask me) I have a 67 gmc 910, 250 inline, fleetside, longbed This project is going to take a while, I have a 2 year old boy and another one on the way, i'm a 2nd year electrician so money is tight. Just want to thank you all for the vast knowledge floating around this board. It is incredible! Oh and I will through pictures on here tomorrow sometime. Thanks, have a great night Posted via Mobile Device Posted via Mobile Device

09-15-2012, 12:04 AM	#2
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: hello from Entwistle Lots of good info on here. You could spend months on here and not learn everything you can. Can't wait to see pics. Good luck with your build. __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

09-15-2012, 12:17 AM	#3
71sierragrande Petroleum User Join Date: Dec 2010 Location: San Diego, California Posts: 928	Re: hello from Entwistle Greetings from California. Always wanted to get up that way for a summer trip and check out the Banff area. Preferably on a road bike. Maybe someday... Have fun on the site, these guys know everything there is to know. Good to have you on board, Tim __________________ 1971 GMC Sierra Grande 2WD 1/2 ton, 350/400 auto 2008 Chevy Silverado 2WD 1/2 ton LT1 5.3L auto

09-15-2012, 01:13 AM	#4
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,731	Re: hello from Entwistle Entwhistle! Isn't that 400 miles up the back end of nowhere Alberta. Right next to that other place Resume Speed!! Sorry!! Just yankin' your chain. I lived close to there for 40 years in Rocky Mountain House so I'm familiar with the country side. My old truck I had a couple years ago was the same as yours. 67, long fleet and a 250. It was somewhat rare being the 99th one built. Sold to a retired buddy in Langley. Welcome to the forum!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.