stuck driver front caliper - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tim21391 · 09-19-2012, 11:37 PM

well its been awhile since ive been on here... my bad folks... some people may remember me... but needless to say i need some pointers... first off i have a stuck driver caliper.. i also noticed my master cylinder leaks out the cap... since its $15 im goin with a new master cylinder.. im thinking a new caliper and hose will get me back going... with that being said i think i should go ahead with turning both rotor/hubs.. two calipers.. bearings and seals and what not with pads... $250 why not right?

oldblue1968chevy · 09-20-2012, 02:11 AM

Id for SURE replace the soft hoses and probably the hard ones, i chaased a problem for EVER and it was a NEW braided hose that was pinched and never went back to normal....

At least all the hydraulic parts (calipers, mc lines)

welcome back ever get the truck painted i remember you

cdowns · 09-20-2012, 04:25 AM

a leak out the master cyl car is normally the gasket or cap itself not the naster cyl

09-19-2012, 11:37 PM	#1
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	stuck driver front caliper well its been awhile since ive been on here... my bad folks... some people may remember me... but needless to say i need some pointers... first off i have a stuck driver caliper.. i also noticed my master cylinder leaks out the cap... since its $15 im goin with a new master cylinder.. im thinking a new caliper and hose will get me back going... with that being said i think i should go ahead with turning both rotor/hubs.. two calipers.. bearings and seals and what not with pads... $250 why not right? __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

09-20-2012, 02:11 AM	#2
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: stuck driver front caliper Id for SURE replace the soft hoses and probably the hard ones, i chaased a problem for EVER and it was a NEW braided hose that was pinched and never went back to normal.... At least all the hydraulic parts (calipers, mc lines) welcome back ever get the truck painted i remember you __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

09-20-2012, 04:25 AM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: stuck driver front caliper a leak out the master cyl car is normally the gasket or cap itself not the naster cyl __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.