What did you do to your truck today? - Page 249 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

63c10step · 09-29-2012, 11:10 PM

[IMG]

[/IMG]
Posted via Mobile Device

62 Barnfind · 09-30-2012, 09:44 AM

Did some more painting with this hot rod flatz.

CRGRS 66 · 09-30-2012, 02:51 PM

Put her to work! That is my daughter, she helped me load up 1.5 cords this morning, add that to another cord and a half, should get me through the winter!

dantimdad · 09-30-2012, 02:57 PM

Wire wheeled, cleaned and painted the back half of the frame. Two days of dry time and assembly begins!

Steven

Smoke_Dog · 09-30-2012, 03:11 PM

Always wanted this model!!!

Quote:

Originally Posted by CRGRS 66

Put her to work! That is my daughter, she helped me load up 1.5 cords this morning, add that to another cord and a half, should get me through the winter!

Smoke_Dog · 09-30-2012, 03:28 PM

Like those wheels!

Quote:

Originally Posted by 198plus

Put one wheel on today........

mud.man.rj · 09-30-2012, 06:27 PM

Oh besides getting diff parts ordered I made a deal for the engine I am building for my buddy's 56 Gm to trade even for a Copper paint job with ghost flames on my 71. Since all my body metal is new and straight it a good trade for both, won't be soon but will be goodbye to Satin black and flames.

CRGRS 66 · 09-30-2012, 11:48 PM

Quote:

Originally Posted by 66clow

Unfortunately sold it

makes me sad, I bet you must be trying to figure out how and when you will end up with your next one, you stick around here Mr.

woodscavenger · 10-01-2012, 12:47 AM

Working on a P/s conversion. Have a mid 70's front end that I am using.

mud.man.rj · 10-01-2012, 03:28 PM

So my 12 bolt is drivin me mad, the open diff. trick with a Loc-rite is just to costly now and still weaker than an Auburn so bit the big one and ordered a Auburn posi unit, have the new bearing already, cash price $573, so that's that, next back to abuse time, haha, well maybe drive a bit nicer, wife will be mad now.

But will get over it.

CRGRS 66 · 10-01-2012, 03:55 PM

Made some serious inquiries to get some parts ordered for my winter projects. Will start a winter project build thread soon!

GMR-PERFORMANCE · 10-01-2012, 04:58 PM

my new rear end..

35 spline wave loc, nodular housing 1350 yoke with willwood disc.. bolt in unit.. I want to do this once and be done with it..

CRGRS 66 · 10-01-2012, 05:17 PM

Quote:

Originally Posted by GMR-PERFORMANCE

my new rear end..

35 spline wave loc, nodular housing 1350 yoke with willwood disc.. bolt in unit.. I want to do this once and be done with it..

very impressive, you have a lovely rear end there

GMR-PERFORMANCE · 10-01-2012, 05:46 PM

Do you think my truck makes my rear end look fat ?? LMAO

Well this is not my first go round with building.. I myself hate the 12 bolt and found that not only is it costly to build the first time that when it breaks you could have bought a 9 inch and not be dinking around with the 12 bolt. Just my opinion I know tons of guys have them and will tell you how tough they are.. However there is just as many and more that can show you the broken parts and in the end a 9 inch was installed.

Being that you can buy them as a complete unit for bolt in today it only makes sense.. I run my stuff hard and once sheet metal is done the idea of a snapped axle walking out and tearing up my bed side .. makes me sick ..

mud.man.rj · 10-01-2012, 07:22 PM

Ya I agree, even with the new Auburn installed I will just find another weak point, then fix it,,then another. haha. Drive it hard. Always.

Hx16457 · 10-01-2012, 07:57 PM

Installed new armrests and visors, of course one of the visors is not "straight", flipped stuff pi$$es me off!
Posted via Mobile Device

dantimdad · 10-01-2012, 09:01 PM

Got to see the grill I am getting for$50. It looks really good. One small ding and needs to be stripped.

I was in the Camry so I couldn't get it. Will pick it up next Saturday.

Steven

63ChevC10 · 10-01-2012, 10:37 PM

I cleaned all of this out of my wiper linkage. I wonder how long it was sitting before I bought it???

woodscavenger · 10-02-2012, 12:57 AM

Working on my p/s steering conversion. Scrubbed the old gear box clean, working on the p/s pump and mounting hardware....

RockTonka · 10-02-2012, 02:15 AM

Quote:

Originally Posted by GMR-PERFORMANCE

my new rear end..

35 spline wave loc, nodular housing 1350 yoke with willwood disc.. bolt in unit.. I want to do this once and be done with it..

Looks nice, details on where ya got that??

Edit...nevermind, fiqured it out. Moser M9 is badass, and $$$$!

jbgroby · 10-02-2012, 08:27 AM

Quote:

Originally Posted by dantimdad

Got to see the grill I am getting for$50. It looks really good. One small ding and needs to be stripped.

I was in the Camry so I couldn't get it. Will pick it up next Saturday.

Steven

Steve, What your back windows don't roll down?

ArmedAffliction · 10-02-2012, 10:29 AM

Posted via Mobile Device
Here are some pics sorry for the delay

Posted via Mobile Device

ArmedAffliction · 10-02-2012, 10:35 AM

Well that didnt work
How do you share pics from instagram
Posted via Mobile Device

dantimdad · 10-02-2012, 11:13 AM

Quote:

Originally Posted by jbgroby

Steve, What your back windows don't roll down?

Uhmmmm....

This is the first car I have had payments on in 14 years. No chances are being taken with the interior. LOL!

Steven

dantimdad · 10-02-2012, 11:14 AM

Quote:

Originally Posted by ArmedAffliction

Well that didnt work
How do you share pics from instagram
Posted via Mobile Device

I couldn't get it to work. I just transfer stuff to photobucket and use their links.

Steven

09-29-2012, 11:10 PM	#6201
63c10step Registered User Join Date: Jul 2011 Location: Bristol,Tn Posts: 45	Re: What did you do to your truck today? [IMG][/IMG] Posted via Mobile Device

09-30-2012, 09:44 AM	#6202
62 Barnfind Registered User Join Date: Jan 2012 Location: Salado, Tx Posts: 1,375	Re: What did you do to your truck today? Did some more painting with this hot rod flatz. __________________ John Z 1962 Chevy C10 Stepside 62 Barnfind My build tread: http://67-72chevytrucks.com/vboard/s...d.php?t=507513

09-30-2012, 02:51 PM	#6203
CRGRS 66 Registered User Join Date: Apr 2012 Location: Cambridge, Ontario, Canada Posts: 1,771	Re: What did you do to your truck today? Put her to work! That is my daughter, she helped me load up 1.5 cords this morning, add that to another cord and a half, should get me through the winter! Attached Images __________________ Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709

09-30-2012, 02:57 PM	#6204
dantimdad Registered User Join Date: Feb 2010 Location: Hartselle, Al. Posts: 466	Re: What did you do to your truck today? Wire wheeled, cleaned and painted the back half of the frame. Two days of dry time and assembly begins! Steven __________________ “Life is and will ever remain an equation incapable of solution, but it contains certain known factors.” - Nikola Tesla Matt. 6:27 "Who of you by worrying can add a single hour to his life?” http://www.67-72chevytrucks.com/vboa...=507266&page=2

09-30-2012, 06:27 PM	#6207
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: What did you do to your truck today? Oh besides getting diff parts ordered I made a deal for the engine I am building for my buddy's 56 Gm to trade even for a Copper paint job with ghost flames on my 71. Since all my body metal is new and straight it a good trade for both, won't be soon but will be goodbye to Satin black and flames.

10-01-2012, 12:47 AM	#6209
woodscavenger Registered User Join Date: Sep 2012 Location: Boise, ID Posts: 57	Re: What did you do to your truck today? Working on a P/s conversion. Have a mid 70's front end that I am using. __________________ 62 C10, LWB fleetside, 350SBC, Munie 4spd,

10-01-2012, 03:28 PM	#6210
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: What did you do to your truck today? So my 12 bolt is drivin me mad, the open diff. trick with a Loc-rite is just to costly now and still weaker than an Auburn so bit the big one and ordered a Auburn posi unit, have the new bearing already, cash price $573, so that's that, next back to abuse time, haha, well maybe drive a bit nicer, wife will be mad now. But will get over it.

10-01-2012, 03:55 PM	#6211
CRGRS 66 Registered User Join Date: Apr 2012 Location: Cambridge, Ontario, Canada Posts: 1,771	Re: What did you do to your truck today? Made some serious inquiries to get some parts ordered for my winter projects. Will start a winter project build thread soon! __________________ Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709

10-01-2012, 04:58 PM	#6212
GMR-PERFORMANCE Registered User Join Date: Aug 2010 Location: Keller TX Posts: 836	Re: What did you do to your truck today? my new rear end.. 35 spline wave loc, nodular housing 1350 yoke with willwood disc.. bolt in unit.. I want to do this once and be done with it.. Attached Images __________________ 62 long box with a little SBC http://www.67-72chevytrucks.com/vboa...d.php?t=510631 http://good-times.webshots.com/album/561798652HdwqzG

10-01-2012, 05:46 PM	#6214
GMR-PERFORMANCE Registered User Join Date: Aug 2010 Location: Keller TX Posts: 836	Re: What did you do to your truck today? Do you think my truck makes my rear end look fat ?? LMAO Well this is not my first go round with building.. I myself hate the 12 bolt and found that not only is it costly to build the first time that when it breaks you could have bought a 9 inch and not be dinking around with the 12 bolt. Just my opinion I know tons of guys have them and will tell you how tough they are.. However there is just as many and more that can show you the broken parts and in the end a 9 inch was installed. Being that you can buy them as a complete unit for bolt in today it only makes sense.. I run my stuff hard and once sheet metal is done the idea of a snapped axle walking out and tearing up my bed side .. makes me sick .. Attached Images __________________ 62 long box with a little SBC http://www.67-72chevytrucks.com/vboa...d.php?t=510631 http://good-times.webshots.com/album/561798652HdwqzG

10-01-2012, 07:22 PM	#6215
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: What did you do to your truck today? Ya I agree, even with the new Auburn installed I will just find another weak point, then fix it,,then another. haha. Drive it hard. Always.

10-01-2012, 07:57 PM	#6216
Hx16457 Registered User Join Date: Sep 2012 Location: Lawton Oklahoma Posts: 308	Re: What did you do to your truck today? Installed new armrests and visors, of course one of the visors is not "straight", flipped stuff pi$$es me off! Posted via Mobile Device __________________ People who make excuses didn't want to do it in the first place! http://s1326.photobucket.com/albums/...cpZZ1QQtppZZ16

10-01-2012, 09:01 PM	#6217
dantimdad Registered User Join Date: Feb 2010 Location: Hartselle, Al. Posts: 466	Re: What did you do to your truck today? Got to see the grill I am getting for$50. It looks really good. One small ding and needs to be stripped. I was in the Camry so I couldn't get it. Will pick it up next Saturday. Steven __________________ “Life is and will ever remain an equation incapable of solution, but it contains certain known factors.” - Nikola Tesla Matt. 6:27 "Who of you by worrying can add a single hour to his life?” http://www.67-72chevytrucks.com/vboa...=507266&page=2

10-01-2012, 10:37 PM	#6218
63ChevC10 Registered User Join Date: Sep 2012 Location: Graham, WA Posts: 136	Re: What did you do to your truck today? I cleaned all of this out of my wiper linkage. I wonder how long it was sitting before I bought it??? Attached Images

10-02-2012, 12:57 AM	#6219
woodscavenger Registered User Join Date: Sep 2012 Location: Boise, ID Posts: 57	Re: What did you do to your truck today? Working on my p/s steering conversion. Scrubbed the old gear box clean, working on the p/s pump and mounting hardware.... __________________ 62 C10, LWB fleetside, 350SBC, Munie 4spd,



Register or Log In To remove these advertisements.

10-02-2012, 10:29 AM	#6222
ArmedAffliction Registered User Join Date: Jul 2012 Location: Spanish Fork, Ut Posts: 10	Re: What did you do to your truck today? Posted via Mobile Device Here are some pics sorry for the delay Posted via Mobile Device

10-02-2012, 10:35 AM	#6223
ArmedAffliction Registered User Join Date: Jul 2012 Location: Spanish Fork, Ut Posts: 10	Re: What did you do to your truck today? Well that didnt work How do you share pics from instagram Posted via Mobile Device

Register or Log In To remove these advertisements.