454 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Luv68's · 10-16-2003, 09:28 PM

will have pictures this weekend. Disassembled 454 4bolt main, was told it was standard when I bought it. No oversize on bearings or pistons. Will need to be rebuilt. no intake or oil pan. Cannot ship must be picked up. Has been sitting for a while. $400

jacquesdean · 10-17-2003, 10:56 AM

do you have all the pulleys, brackets, heads. with it

Luv68's · 10-17-2003, 05:33 PM

yes I do have the heads, but no brackets

jacquesdean · 10-17-2003, 05:40 PM

do you have the block vin number and casting numbers for the heads please

jacquesdean · 10-17-2003, 05:42 PM

i see you are looking for a 68 cab, would a 69 do?

Luv68's · 10-17-2003, 08:02 PM

block casting # 14015445 heads 14092360

Luv68's · 10-17-2003, 08:04 PM

#2

jamis · 10-17-2003, 08:22 PM

How about the rods 3/8 or 7/16

block is #14015445...454.......78-90... 4 bolt

heads are #14092360...86-88...oval...OPEN...454 Truck

Luv68's · 10-17-2003, 08:25 PM

will need to double check but I think they are 3/8

Luv68's · 10-19-2003, 07:55 AM

TTT

10-17-2003, 05:40 PM	#4
jacquesdean Registered User Join Date: Jan 2003 Location: Snead, Alabama Posts: 399	454 do you have the block vin number and casting numbers for the heads please __________________ Jock, Powder blasting shop, Alabama

10-17-2003, 05:42 PM	#5
jacquesdean Registered User Join Date: Jan 2003 Location: Snead, Alabama Posts: 399	454 i see you are looking for a 68 cab, would a 69 do? __________________ Jock, Powder blasting shop, Alabama

10-17-2003, 08:02 PM	#6
Luv68's Registered User Join Date: Jan 2001 Location: Russellville, Tn and DeLand Fl. Posts: 533	block casting # 14015445 heads 14092360 Attached Images

10-17-2003, 08:04 PM	#7
Luv68's Registered User Join Date: Jan 2001 Location: Russellville, Tn and DeLand Fl. Posts: 533	#2 Attached Images

10-17-2003, 08:22 PM	#8
jamis F.A.S.T. president Join Date: Sep 2003 Location: Florida Posts: 1,883	How about the rods 3/8 or 7/16 block is #14015445...454.......78-90... 4 bolt heads are #14092360...86-88...oval...OPEN...454 Truck Last edited by jamis; 10-17-2003 at 08:25 PM.

10-16-2003, 09:28 PM	#1
Luv68's Registered User Join Date: Jan 2001 Location: Russellville, Tn and DeLand Fl. Posts: 533	454 will have pictures this weekend. Disassembled 454 4bolt main, was told it was standard when I bought it. No oversize on bearings or pistons. Will need to be rebuilt. no intake or oil pan. Cannot ship must be picked up. Has been sitting for a while. $400

10-17-2003, 10:56 AM	#2
jacquesdean Registered User Join Date: Jan 2003 Location: Snead, Alabama Posts: 399	re: 454 do you have all the pulleys, brackets, heads. with it __________________ Jock, Powder blasting shop, Alabama

10-17-2003, 05:33 PM	#3
Luv68's Registered User Join Date: Jan 2001 Location: Russellville, Tn and DeLand Fl. Posts: 533	yes I do have the heads, but no brackets

10-17-2003, 08:25 PM	#9
Luv68's Registered User Join Date: Jan 2001 Location: Russellville, Tn and DeLand Fl. Posts: 533	will need to double check but I think they are 3/8 Attached Images

10-19-2003, 07:55 AM	#10
Luv68's Registered User Join Date: Jan 2001 Location: Russellville, Tn and DeLand Fl. Posts: 533	TTT



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.