|
10-17-2012, 04:50 PM
|
#1 |
|
Cool Truck
Join Date: Dec 2008
Location: Bowie,MD
Posts: 1,869
|
Trailer harness
I wanted to hook up a trailer harness on my truck and was wondering if anyone has ever used the one from LMC? Have you had any problems with it, and how do you go about installing it?
http://www.lmctruck.com/icatalog/cb/full.aspx?Page=50
__________________
1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed |
|
|
|
10-17-2012, 06:46 PM
|
#2 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Trailer harness
U can pick those up at local trailer shops also. There is a rubber connection at the last support under the truck where the rear harness can be unplugged from the rest of the truck. Take that connection loose and the end going up front plug the insirt adapter into it and then the rear harness into it. Your done.
 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
10-17-2012, 08:16 PM
|
#3 |
|
Cool Truck
Join Date: Dec 2008
Location: Bowie,MD
Posts: 1,869
|
Re: Trailer harness
what do you mean by last support under the truck?
__________________
1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed |
|
|
|
|
10-17-2012, 08:21 PM
|
#4 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Trailer harness
Look under the truck at back drivers side. The frame rail there should be a brace going over to the passenger side. There should be a rubber gormlet right there close that pulls a part. It should be tucked up in the frame with a clip.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
10-17-2012, 08:27 PM
|
#5 |
|
Cool Truck
Join Date: Dec 2008
Location: Bowie,MD
Posts: 1,869
|
Re: Trailer harness
ok, thanks for the info
__________________
1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed |
|
|
|
|
10-17-2012, 09:01 PM
|
#6 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: Trailer harness
Your welcome!
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
