![]() |
![]() |
#1 |
Registered User
Join Date: Oct 2012
Location: Picayune, Mississippi
Posts: 62
|
New geezer here
Hey guys,hope I am posting this in the right place, but picked up a '54 short bed yesterday. Already have 5 or 6 cars, and am tickled pink over this 'new' truck. I bleed bowties and have been a Chevy vanner since the 70s, have had 6 early Chevy vans, a few Chevelles, El Caminos, and Vegas, and still have a 65 Chevy van and now the 54 truck.
I will search the archives but will have a ton of questions until I get the hang of this great site and get to know my truck better. I have and want to put a 350/350 set up in the truck and would really like to convert to five lug setup since I will have to do away with my stock rear end. I am retired, so needless to say, money is tight and I am looking for advice on a budget build. A Mustang II from suspension is out of the budget. My main target is reliability and comfort if that is possible. Power steering and A/C are on top of the list. But first I need advice on rear end, external gas tank, V8 engine and tranny mounts. Should V8 go in where the six banger is or should it be moved back? Anyway, enough questions for now. I look forward to joining in on a great shared interest of vintage iron. greg |
![]() |
![]() |
![]() |
#2 |
SAVING ONE TRUCK AT A TIME
![]() Join Date: Feb 2010
Location: sherwood oregon
Posts: 1,141
|
Re: New geezer here
welcome.
__________________
53-suburban (99% done) 40-pick up (99.9% done) 12-cc lb dually D-max (dd) 61-crew cab D-max "PAY LESS FOR WHAT YOU NEED PAY MORE FOR WHAT YOU WANT" 53 BURBAN BARN FIND:http://67-72chevytrucks.com/vboard/s...d.php?t=404091 1940 PROJECT MOON SHINE:http://67-72chevytrucks.com/vboard/s...d.php?t=551088 1961 CREW MAX: http://67-72chevytrucks.com/vboard/s....php?p=6957999 |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jul 2011
Location: Las Vegas - Nev. aka Sin City
Posts: 1,835
|
Re: New geezer here
welcome from sin city
|
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Apr 2009
Location: Kennewick WA.
Posts: 1,437
|
Re: New geezer here
Welcome from Wa. I went to school @ Delta State many eons ago. What most people don't know about Miss is how good the food is.
![]() Posted via Mobile Device |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Dec 2009
Location: Melbourne Australia
Posts: 549
|
Re: New geezer here
"I bleed bowties" I like that! Its good to see your passionate about your Chevys!
I personally love anything GM from Chevrolet,Pontiacs, the humble aussie Holden and everything in between. Welcome from Melbourne Australia!
__________________
RIP John (Lambis), my beloved Father & best Friend. My Build 56 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=486721 |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jul 2011
Location: Auburn ca.
Posts: 2,886
|
Re: New geezer here
5 or 6 cars! That is nowhere enough! How do you servive?
![]() ![]() |
![]() |
![]() |
![]() |
#7 |
and a few others
Join Date: Jun 2007
Location: Blue Ridge Mountains of VA
Posts: 5,638
|
Re: New geezer here
Welcome from a fellow retiree.
How 'bout some pictures of that truck and the van too. Is it a shorty van?
__________________
Bill ![]() BlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
|
Re: New geezer here
Welcome, you have found a wealth of knowledge and bunch of very civil people.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project |
![]() |
![]() |
![]() |
#9 |
Registered User
![]() Join Date: Aug 2011
Location: Boston, MA
Posts: 695
|
Re: New geezer here
Welcome from Medford MA. We're all Bowtie bleeders here.
|
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Oct 2012
Location: Picayune, Mississippi
Posts: 62
|
Re: New geezer here
Well, after much thought and direction searching, I have decide to go with an S10 frame. While taking my 54 apart to start semi-resto jobby on it. I was going to keep the straight axle and disc brake it. But after much addition, the total was making it lean more toward the S10 frame conversion. Got the 54 down to the last body bolts and the S10 is down to the bare frame. I post pics later today falling asleep here.
|
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Jun 2012
Location: Southern Iowa
Posts: 944
|
Re: New geezer here
I love seeing progress pictures.
|
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Feb 2012
Location: CA
Posts: 846
|
Re: New geezer here
Welcome Greg. This was my first truck build and this site is where you want to be. Wealth of information gives you so many different options you never knew were available.
I have a '49. I completely restored the frame, suspension, and all the parts. In the end as happy as I am with the frame, I will eventually pull a S10 frame like you are and go that route. Good decision by your part. Frame come with a motor in it? I tucked a 292 in mine with a 5 speed - if I go to the S10 frame the L6 is coming haha. Love to see some pictures.
__________________
"Dixie" - 1988 Chevrolet V30 CC DRW "3+3" | 7.4L 454 (L19) | TH400 | 4" lift | 35"s "Lucille" - 1949 Chevrolet 3100 (on hold) |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Jan 2007
Location: York, Pa.
Posts: 1,386
|
Re: New geezer here
gregw98, welcome from York PA. It will be good to see another 54 on here.
Shannon
__________________
48 Panel Truck 1948 Chevy / S10 1954 Chevy / S10 1951 Chevy / C4 47 Step van Lowered 1996 Dually |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Oct 2012
Location: Picayune, Mississippi
Posts: 62
|
Re: New geezer here
Next step is to get the cab into the garage and sitting on the frame. Haven't exactly figured how I am going to do that just yet. Solo act, here. Being that it is raining, I am going to put the 79 Camaro rearend in it today. But have plenty to keep me bleeding, I mean busy.
|
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Oct 2012
Location: Picayune, Mississippi
Posts: 62
|
Re: New geezer here
![]() ![]() ![]() |
![]() |
![]() |
![]() |
#16 |
Junior Member
Join Date: Dec 2006
Location: Guymon, Oklahoma
Posts: 2,040
|
Re: New geezer here
Welcome Greg, to the site. Always good to see another old Geezer here who loves "old iron". Great people, plus much helpful info. Neat truck you have, and will enjoy watching it come together.
Cayoterun
__________________
Cayoterun Okla. Panhandle I think I'll do it myself and pay the extra $500. |
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Jul 2011
Location: Auburn ca.
Posts: 2,886
|
Re: New geezer here
Hey my wife used to live in Guymon.
|
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Oct 2012
Location: Picayune, Mississippi
Posts: 62
|
Re: New geezer here
Yeah, I remember her.
|
![]() |
![]() |
![]() |
#19 |
Registered User
![]() Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,532
|
Re: New geezer here
Welcome from the middle of Washington State. My favorite real redhead peddles real estate in Picayune. She's my cousin's daughter and very special in my heart.
|
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Oct 2012
Location: Picayune, Mississippi
Posts: 62
|
Re: New geezer here
Okay been working my buns off. Got an S10, got it stripped, stripped down the '54. So far so good. Got the S10 for $500, sold the 2.8 and tranny for $450, the sold the '54 frame for $250. Picked up a '79 Camaro rear end and got it installed. Got the 2 inch front spacers, ordered the V8 offset engine mounts. Going to replace the upper control bushings today. Rolled the cab into the garage and set it down on the S10 frame. Made my body mounts utilizing fabbed S10 donut bushings. So far, I have been flying solo. Getting there with the help of my trusty engine hoist. Once I get the front cap on and everything aligned, I will weld the body mounts in place and then I will have the most intimidating part behind me. I'll transfer some pics and load them here.
BTW: is there a way to load pics directly from MY COMPUTER without having to put them on PHOTOBUCKET first? |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Oct 2012
Location: Picayune, Mississippi
Posts: 62
|
Re: New geezer here
[IMG]http://s6.photobucket.com/albums/y214/gregw98/?action=view¤t=000_0055.jpg[/]
I can't seem to get full size pics posted. 'll try again later. Last edited by gregw98; 11-20-2012 at 11:47 AM. Reason: can't get pics posted right. |
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Jun 2012
Location: Southern Iowa
Posts: 944
|
Re: New geezer here
Make sure you copy and paste the "IMG for bulletin boards & forums" from the Photobucket Share selection.
Last edited by Highsider; 11-20-2012 at 11:35 PM. |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Oct 2012
Location: Picayune, Mississippi
Posts: 62
|
Re: New geezer here
![]() |
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Oct 2012
Location: Picayune, Mississippi
Posts: 62
|
Re: New geezer here
|
![]() |
![]() |
![]() |
#25 |
Registered User
Join Date: Oct 2012
Location: Picayune, Mississippi
Posts: 62
|
Re: New geezer here
<a href="http://s6.photobucket.com/albums/y214/gregw98/?action=view&current=2012-11-19_161458.jpg" target="_blank"><img src="http://i6.photobucket.com/albums/y214/gregw98/2012-11-19_161458.jpg" border="0" alt="Photobucket"></a>
|
![]() |
![]() |
![]() |
Bookmarks |
|
|