Fender Badge question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69GWC · 10-28-2012, 08:45 PM

Ok so my truck is a 69 K10 and the driver side front fender has a C10 badge on it and I was wondering what was really spose to be on there so I can maybe change it out.
It does not have one on the passenger side sure they changed the fender out at some point off a 2wd truck.

**jocko** · 10-28-2012, 09:37 PM

that is correct - there are no K10 badges. Blazer had a K5, but that's as close as it got. Yours are correct, unless your truck had a higher trim option selection by the original owner, such as CST (Custom Sport Truck), in which case it would be "CST 10". Also, if it has a 350 eng, that callout would normally go under the CST 10. More than likely your truck is the base model. If you show a pic of your SPID, we can confirm exactly what your fender badge(s) should be. And nice truck!

69GWC · 10-28-2012, 10:08 PM

Ok so even though its a K10 the C10 badge is correct? Mine was a 6cyl truck and is not a custom model its pretty plain I would say.

Thanks for the info.
Posted via Mobile Device

**jocko** · 10-28-2012, 10:14 PM

Yep, in your case then, C10 badge would be correct. No such thing as a K10 badge. Love the color - looks kinda like my 01 Z71 factory sapphire blue, or whatever it's called!

69GWC · 10-28-2012, 10:20 PM

Thanks, yeah I really like the color.

Kinda explains why I could not find a K10 badge for it..lol Maybe I will buy a badge for the other fender then as it does not have one and I think it should have one on both sides if its going to have them..
Posted via Mobile Device

**jocko** · 10-28-2012, 10:34 PM

Or... Buy a K5 Badge and somehow replace your C with a K - that would blow a few minds.

SS Tim · 10-28-2012, 10:46 PM

If you are going to do custom then do "Kustom Kamper/10"

SS Tim · 10-28-2012, 10:54 PM

On a serious side these are the emblems you should probably be running. Great looking truck!

69GWC · 10-29-2012, 08:05 AM

Yeah those are what is on the 70 I have, well not the 4wd badge. Might get a set of the 350 badges as well when I pick up a new C10 badge. Thanks
Posted via Mobile Device

**special-K** · 10-29-2012, 08:20 AM

Custom/10 or CST/10 would look good on your "custom" looking truck,if you don't want the C/10s

10-28-2012, 08:45 PM	#1
69GWC Registered User Join Date: Jun 2012 Posts: 1,089	Fender Badge question Ok so my truck is a 69 K10 and the driver side front fender has a C10 badge on it and I was wondering what was really spose to be on there so I can maybe change it out. It does not have one on the passenger side sure they changed the fender out at some point off a 2wd truck.

10-28-2012, 09:37 PM	#2
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,976	Re: Fender Badge question that is correct - there are no K10 badges. Blazer had a K5, but that's as close as it got. Yours are correct, unless your truck had a higher trim option selection by the original owner, such as CST (Custom Sport Truck), in which case it would be "CST 10". Also, if it has a 350 eng, that callout would normally go under the CST 10. More than likely your truck is the base model. If you show a pic of your SPID, we can confirm exactly what your fender badge(s) should be. And nice truck!

10-28-2012, 10:08 PM	#3
69GWC Registered User Join Date: Jun 2012 Posts: 1,089	Re: Fender Badge question Ok so even though its a K10 the C10 badge is correct? Mine was a 6cyl truck and is not a custom model its pretty plain I would say. Thanks for the info. Posted via Mobile Device

10-28-2012, 10:14 PM	#4
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,976	Re: Fender Badge question Yep, in your case then, C10 badge would be correct. No such thing as a K10 badge. Love the color - looks kinda like my 01 Z71 factory sapphire blue, or whatever it's called!

10-28-2012, 10:20 PM	#5
69GWC Registered User Join Date: Jun 2012 Posts: 1,089	Re: Fender Badge question Thanks, yeah I really like the color. Kinda explains why I could not find a K10 badge for it..lol Maybe I will buy a badge for the other fender then as it does not have one and I think it should have one on both sides if its going to have them.. Posted via Mobile Device

10-28-2012, 10:34 PM	#6
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,976	Re: Fender Badge question Or... Buy a K5 Badge and somehow replace your C with a K - that would blow a few minds.

10-28-2012, 10:46 PM	#7
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: Fender Badge question If you are going to do custom then do "Kustom Kamper/10" __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

10-28-2012, 10:54 PM	#8
SS Tim Registered User Join Date: Aug 2010 Location: Edwards, CA Posts: 7,503	Re: Fender Badge question On a serious side these are the emblems you should probably be running. Great looking truck! Attached Images __________________ Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID Blazer SPID Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders Do you have a 1972 Plaid Pickup? Plaid Blazer ** Plaid Suburban

10-29-2012, 08:05 AM	#9
69GWC Registered User Join Date: Jun 2012 Posts: 1,089	Re: Fender Badge question Yeah those are what is on the 70 I have, well not the 4wd badge. Might get a set of the 350 badges as well when I pick up a new C10 badge. Thanks Posted via Mobile Device

10-29-2012, 08:20 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Fender Badge question Custom/10 or CST/10 would look good on your "custom" looking truck,if you don't want the C/10s __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.