Project: 1967 C10 Small Window - Page 32 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

El Campo · 12-03-2012, 08:19 PM

Glossy all the way!!!!!

David67 · 12-03-2012, 08:23 PM

Quote:

Originally Posted by El Campo

Glossy all the way!!!!!

Decided on glossy just before you posted!

David67 · 12-13-2012, 06:08 PM

came home to this.....thanks Josh! It's just about there. Would y'all recommend spraying a few coats of automotive clear, followed by wetsanding, buffing, polishing, to get it looking like glass? I want to make sure it's compatible. He was also really busy with the bed and it's pretty close to being ready for red!

**67cheby** · 12-13-2012, 06:11 PM

Beautiful !
Posted via Mobile Device

David67 · 12-13-2012, 06:14 PM

Quote:

Originally Posted by 67cheby

Beautiful !
Posted via Mobile Device

Thanks Mike!

Slick67 · 12-13-2012, 07:10 PM

Is that Outdoor Spar Uerathane? Don't use auto clear on it. Looks great!!!!! If so wet sand it with 1200 to get slick then with 2000 grit, clean it then buff it. I used McGuires polish #1 cut and got great results after the buffing, wax it with some really good wax and buff it again then apply it by hand and just wipe it off. If you need help let me know!!!

**cericd** · 12-13-2012, 07:19 PM

Looking great! Can't wait to see it mounted in the bed.

David67 · 12-13-2012, 07:34 PM

Quote:

Originally Posted by Slick67

Is that Outdoor Spar Uerathane? Don't use auto clear on it. Looks great!!!!! If so wet sand it with 1200 to get slick then with 2000 grit, clean it then buff it. I used McGuires polish #1 cut and got great results after the buffing, wax it with some really good wax and buff it again then apply it by hand and just wipe it off. If you need help let me know!!!

Thanks for the info!! yeah it's Minwax indoor/outdoor spar urethane. So I'd do what you mentioned to the urethane itself?

Quote:

Originally Posted by cericd

Looking great! Can't wait to see it mounted in the bed.

Thanks!

aggie91 · 12-13-2012, 08:41 PM

Bed wood looks great. Are you home on break now till January?
Posted via Mobile Device

**oldman3** · 12-13-2012, 08:42 PM

Super nice...Jim

mud.man.rj · 12-13-2012, 09:58 PM

Nice, very nice, car show material.

1985-GMC · 12-13-2012, 10:51 PM

Looks awesome! Yeah I wouldn't spray automotive clear on top of that other stuff, it will do some neat stuff you're not gonna like.

67ctener · 12-13-2012, 11:24 PM

Looks awesome
Posted via Mobile Device

TX72C10 · 12-14-2012, 01:34 AM

David,

Love your truck and being that your a Aggie I thought you might like to check this out if you have not already seen it.

Davis Lights 2012 - Texas Aggie War Hymn - YouTube

David67 · 12-14-2012, 03:41 AM

Quote:

Originally Posted by aggie91

Bed wood looks great. Are you home on break now till January?
Posted via Mobile Device

Thanks! Yeah I'm back for about a month!

Quote:

Originally Posted by oldman3

Super nice...Jim

Thanks!

Quote:

Originally Posted by mud.man.rj

Nice, very nice, car show material.

Thanks a lot!

Quote:

Originally Posted by 1985-GMC

Looks awesome! Yeah I wouldn't spray automotive clear on top of that other stuff, it will do some neat stuff you're not gonna like.

Thanks! and I had a feeling it might..

Quote:

Originally Posted by 67ctener

Looks awesome
Posted via Mobile Device

Thank you!

Quote:

Originally Posted by TX72C10

David,

Love your truck and being that your a Aggie I thought you might like to check this out if you have not already seen it.

Davis Lights 2012 - Texas Aggie War Hymn - YouTube

WHOOOOP! I hadn't seen that, thanks for sharing and for the compliment!

David67 · 12-14-2012, 03:44 AM

I just went and checked facebook.....it had been posted a few times

Bennett68C10 · 12-14-2012, 09:29 AM

Bed wood looks great David

longbed67 · 12-14-2012, 10:08 AM

Looks great! What is compatible is Epoxy! you can thin it down, spray it to get the build. Epoxy is also much denser and creates a harder surface. The only down side is you must spray Spar Varnish over it again as Epoxy is not UV resistant. You can then sand and buff without excessive yellowing from the Spar Var...

jlsanborn · 12-14-2012, 01:10 PM

Looks awesome David! I wouldn't mess around with other finishes on there. What you've got now looks sick! Just my $0.02

How bout some bed pics!?

David67 · 12-14-2012, 03:13 PM

Quote:

Originally Posted by Bennett--G4L

Bed wood looks great David

Thanks Keith

Quote:

Originally Posted by longbed67

Looks great! What is compatible is Epoxy! you can thin it down, spray it to get the build. Epoxy is also much denser and creates a harder surface. The only down side is you must spray Spar Varnish over it again as Epoxy is not UV resistant. You can then sand and buff without excessive yellowing from the Spar Var...

Thanks! And thanks for the info! I'd really like to not have any yellowing so I'm going to sand the urethane and buff it very carefully.

Quote:

Originally Posted by jlsanborn

Looks awesome David! I wouldn't mess around with other finishes on there. What you've got now looks sick! Just my $0.02

How bout some bed pics!?

Thanks a lot, just want to flatten it out a little bit! Not much to see on the bed, but I'll try to get some pictures up later. Right now I'm bodyworking everything so there isn't much progress that you'd be able to see in pics.

David67 · 12-17-2012, 04:55 PM

bodyworking a stepside bed is FUN............

We bolted up the fenders today in order to get the tops of the fenders and bedsides straight. Everything's looking really straight right now and they'll probably come off today and get hit with some more high build. When it comes apart, it's probably not going back together til it's red!

jlsanborn · 12-17-2012, 05:39 PM

It's looking like a truck! Nice work boys!

**oldman3** · 12-17-2012, 05:45 PM

Looks great, shouldn't be long now....Jim

aggie91 · 12-17-2012, 09:05 PM

Looks good. Hope the weather holds out for you while your off from school.
Posted via Mobile Device

David67 · 12-17-2012, 11:41 PM

Quote:

Originally Posted by jlsanborn

It's looking like a truck! Nice work boys!

Thanks!

Quote:

Originally Posted by oldman3

Looks great, shouldn't be long now....Jim

Thanks not too much longer..

Quote:

Originally Posted by aggie91

Looks good. Hope the weather holds out for you while your off from school.
Posted via Mobile Device

Thanks it should be nice and warm tomorrow.

Should be done with bodywork tomorrow.....hoping to get a final coat of high build on and maybe even the black sealer coat...
Also going to try and buff and polish the wood.

It'll show a little bit of grain which I like, but it'll be super slick.

12-03-2012, 08:19 PM	#776
El Campo Registered User Join Date: Jul 2011 Location: El Campo, Tx Posts: 1,246	Re: Project: 1967 C10 Small Window Glossy all the way!!!!! __________________ 72 Chevy blue LWB, 99% original Oklahoma truck, 28,000 miles 72 Chevy SWB: http://67-72chevytrucks.com/vboard/s...d.php?t=486626 (Attempt/Mistake #2) 2003 Harley Davidson Dyna Superglide with 2007 Street Bob front end 2000 Ford F350 Powerstroke 4WD CCLB, 310,000 miles running great (STOLEN St. Patricks Day 2014 AND NEVER RECOVERED) 2002 Ford F250 Powerstroke 4WD CCLB (To replace stolen one) Hook em Horns!!!

12-13-2012, 06:08 PM	#778
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window came home to this.....thanks Josh! It's just about there. Would y'all recommend spraying a few coats of automotive clear, followed by wetsanding, buffing, polishing, to get it looking like glass? I want to make sure it's compatible. He was also really busy with the bed and it's pretty close to being ready for red! Attached Images __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

12-13-2012, 06:11 PM	#779
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project: 1967 C10 Small Window Beautiful ! Posted via Mobile Device __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-13-2012, 07:10 PM	#781
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Project: 1967 C10 Small Window Is that Outdoor Spar Uerathane? Don't use auto clear on it. Looks great!!!!! If so wet sand it with 1200 to get slick then with 2000 grit, clean it then buff it. I used McGuires polish #1 cut and got great results after the buffing, wax it with some really good wax and buff it again then apply it by hand and just wipe it off. If you need help let me know!!! __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

12-13-2012, 07:19 PM	#782
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,155	Re: Project: 1967 C10 Small Window Looking great! Can't wait to see it mounted in the bed.

12-13-2012, 08:41 PM	#784
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Project: 1967 C10 Small Window Bed wood looks great. Are you home on break now till January? Posted via Mobile Device __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

12-13-2012, 08:42 PM	#785
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Project: 1967 C10 Small Window Super nice...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

12-13-2012, 09:58 PM	#786
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: Project: 1967 C10 Small Window Nice, very nice, car show material.

12-13-2012, 10:51 PM	#787
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: Project: 1967 C10 Small Window Looks awesome! Yeah I wouldn't spray automotive clear on top of that other stuff, it will do some neat stuff you're not gonna like. __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

12-13-2012, 11:24 PM	#788
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Project: 1967 C10 Small Window Looks awesome Posted via Mobile Device __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

12-14-2012, 03:44 AM	#791
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window I just went and checked facebook.....it had been posted a few times __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

12-14-2012, 09:29 AM	#792
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project: 1967 C10 Small Window Bed wood looks great David __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

12-14-2012, 10:08 AM	#793
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: Project: 1967 C10 Small Window Looks great! What is compatible is Epoxy! you can thin it down, spray it to get the build. Epoxy is also much denser and creates a harder surface. The only down side is you must spray Spar Varnish over it again as Epoxy is not UV resistant. You can then sand and buff without excessive yellowing from the Spar Var... __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

12-14-2012, 01:10 PM	#794
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,372	Re: Project: 1967 C10 Small Window Looks awesome David! I wouldn't mess around with other finishes on there. What you've got now looks sick! Just my $0.02 How bout some bed pics!? __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

12-17-2012, 04:55 PM	#796
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project: 1967 C10 Small Window bodyworking a stepside bed is FUN............ We bolted up the fenders today in order to get the tops of the fenders and bedsides straight. Everything's looking really straight right now and they'll probably come off today and get hit with some more high build. When it comes apart, it's probably not going back together til it's red! Attached Images __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67



Register or Log In To remove these advertisements.

12-17-2012, 05:39 PM	#797
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,372	Re: Project: 1967 C10 Small Window It's looking like a truck! Nice work boys! __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

12-17-2012, 05:45 PM	#798
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: Project: 1967 C10 Small Window Looks great, shouldn't be long now....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

12-17-2012, 09:05 PM	#799
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Project: 1967 C10 Small Window Looks good. Hope the weather holds out for you while your off from school. Posted via Mobile Device __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

Register or Log In To remove these advertisements.