KS Christmas BONANZA ALOT of 67-72 truck parts!!

[no_rice]

what are you asking for that gmc radiator support if its solid? is it something youd ship?

think i saw an aqua green armrest... got a pair of them?

and maybe there is a white patinad rear sport bumper laying around...?! thanks

[Graham57a]

Hey Randy, do you have any 2wd fleetside rear sport bumper brackets? I'm needing a set of inners and outers (4 pieces total). If so let me know, thanks

[camrycurt]

Originally Posted by teeitup

camrycurt, I have a good manual column but the turn signal plastic retainer is cracked $60 shipped. I have a set of outside door handles $12 plus shipping. No steering wheels right now. If you buy the column I'll throw suicide handle in. Pics coming

Thanks Randy

Randy,

OK, great. I'll pass on the door handles but will take the manual column with the suicide knob thrown in for $60.

I'll get a MO together but it will be this weekend before I can get to the store, so I'll let you know when it's gone out.

Thanks!

[crig39]

I need an oil fill tube with valve cover grommet, do you have one? Thanks Carl

[teeitup]

Street_Smart, I have a under dash harness and a engine harness, the engine harness has some spices and I have a gauge setup $45 shipped for all. Pics here in a bit

no_rice, support has small rust on pass side $60, pics coming, I'd ship but they are expensive like $80 fed ex, but would get you a firm quote if you wanted it. I'll have to look on the arm rests, what year you needing them for? Sorry no sport bumpers

Graham57A, Andrew, sorry none right now

Camrycurt, Curt, sounds good, Thanks

crig39, Carl, yes I have one $31 shipped for it

Thanks Randy

[teeitup]

gmc support

[teeitup]

harnesses and gauge setup

[teeitup]

visors

[brian1971]

hi Randy, can you send me your payment information so I can send you a money order for the fenders ( yellow and blue ones) thanks Brian
Posted via Mobile Device

[Street Smart]

Sounds like a deal!!!!
{Street_Smart, I have a under dash harness and a engine harness, the engine harness has some spices and I have a gauge setup $45 shipped for all.}
I also need a decent drivers side outside handle and a rubber grommet that goes over the heater box with 3 holes, (like in post 39, #81). Ring me up Sir and P.M. me your info, THANKS!

[Street Smart]

P.S. i almost forgot, i need a pair of tail light lens. THANKS AGAIN!

[teeitup]

brian1971, PM coming

Street_Smart, another $15 for all that, pm coming

Thanks Randy

[teeitup]

THANKS to Everyone who has subscribed or bought off this thread!!!! I'm trying my best to keep up with it all. I think I'm all caught up again, if I've forgot anyone please let me know, I don't miss anyone on purpose. Thanks again, Randy

[Elliot949]

Always a pleasure doing business with you... I am looking forward to getting the intake for my little 327 mouse.... Dan

[Crash_OK]

Originally Posted by Crash_OK

Randy.. Thanks for checking on the 4x4 sway bar.. keep me in mind when and if you get one..

Do you have a Transfer case shifter boot trim ring for my 69 K10?

Thanks

Randy,

Have you had a chance to look for the TC Shifter Boot Trim?

Thanks

[teeitup]

Elliott949, Dan, and also with you, Thanks

Crash_OK, Mark, sorry I forgot to post I did look only have 4 speed rings right now

Thanks Randy

[gdelaney]

Will take the 71-72 bumper if straight. Let me know shipping to 55330.

[teeitup]

It is straight but has some scrapes on it, there are close up pics of it on page 9 of this thread. Thanks Randy

[no_rice]

Its still better then the battery acid eaten support on my truck, but I think ill hold up and debate on it a bit. As for the arm rests. They would be for a 70 gmc.

Thanks
Posted via Mobile Device

[longhorn70gmc]

Originally Posted by teeitup

longhorn70GMC, Billy, here is what I have out of the parts you asked about
GMC booklet $10
door edge guards $10
and I think all the horn guts, free
then plus shipping
Thanks Randy

Hello Randy,
Sounds great on the parts, I'll take em. I still have your address on the check box you sent me. My Addy is
1124 Sims
Ridgecrest Ca.
93555

Well my brother I will be standing by to get that set up and out to you. OH YEA, did you have any 3/4 ton ugly hubcaps left?
R/
Billy

[teeitup]

no_rice, I will this weekend

Billy, I will get you a total

Thanks Randy

[yellowGT]

round outside door mirrors w/ the three holes if you just have the arms ill take those.
glove box push button
inside door handles
inside window handles
dash speaker
lighter assembly

[scorchingeng]

Hi teeitup,

I know you may not have these parts left, but I could have sworn I saw them in your other post. Anyway, here's my list:

Rear Chrome Sport Bumper + Brackets to go with it. (To make sure I'm not retarded, it's for a 1969 Longbed Stepside.. I believe that's the right bumper.)

I need a factory A/C control console - best condition possible so levers work, etc.

Chrome Rear Cab Light + Lens.

That should cover it until I can think of something else.

Thanks!

[anrobak]

Teeitup,

I need some parts and I'd like to send you a list and you give me a total price. I'll send a check for payment and come pick them up ASAP if that's agreeable. Here's what I need:

-71'-72' driver-side fender
-71'-72' driver-side inner fender
-71'-72' grill shell and grill
-71'-72' headlight bucket and trim ring
-2 doors, driver and passenger
-set of door panels, either 71' or 72'

[HotRod C/10]

Originally Posted by scorchingeng

Hi teeitup,

I know you may not have these parts left, but I could have sworn I saw them in your other post. Anyway, here's my list:

Rear Chrome Sport Bumper + Brackets to go with it. (To make sure I'm not retarded, it's for a 1969 Longbed Stepside.. I believe that's the right bumper.)

I need a factory A/C control console - best condition possible so levers work, etc.

Chrome Rear Cab Light + Lens.

That should cover it until I can think of something else.

Thanks!

Another LOCAL!.,...........