Anyone install an "ez efi" kit?

[BENC-10]

Hey, everyone. Came across a killer deal for the ez efi master kit. But before i pull the trigger, just want to know what some of the problems i could face (if any!) I am running it on my stock gas tank, which i dont know if it will work or not..If anyone has it installed i would like to know the steps you guys did. Thanks

[derrickmanx1]

I have one. It's great just be careful where you route the wiring. Also follow the directions. If you don't have them go to the fast website and print them out. Take your time and enjoy.
Posted via Mobile Device

[BENC-10]

sweet!!! thanks! are you running the system with your stock tank?..my buddy was telling me that since its f.i it has to have a return line going back to the tank? Thats about the only concern i have, at this point the system itself looks pretty straight foward haha

[70c10stepside]

Carb>efi :p Save the carbs! Electronics are killing everything..
Posted via Mobile Device

[eagleuh1]

Everything but my pocketbook, in the long run anyways.

[Ackattack]

Originally Posted by BENC-10

sweet!!! thanks! are you running the system with your stock tank?..my buddy was telling me that since its f.i it has to have a return line going back to the tank? Thats about the only concern i have, at this point the system itself looks pretty straight foward haha

I put a tbi engine in my 69 truck and switched to a 72 sending unit. It has a vapor recovery thing that can be used for a return line. I also put a TPI engine in my 72 truck and did the same thing. Both of them used a frame mounted fuel pump. The only issue with using the stock tank was on the TPI truck it would cut out a little when you ran low on gas going around a corner. So I just kept more than a 1/4 tank.

[BENC-10]

Originally Posted by Ackattack

I put a tbi engine in my 69 truck and switched to a 72 sending unit. It has a vapor recovery thing that can be used for a return line. I also put a TPI engine in my 72 truck and did the same thing. Both of them used a frame mounted fuel pump. The only issue with using the stock tank was on the TPI truck it would cut out a little when you ran low on gas going around a corner. So I just kept more than a 1/4 tank.

Cool, I had researched a little and found that 72 sending unit too, but i wasnt sure if it was going to work! lol.. THANKS FOR THE ADVICE! ill try and post pics when i install it