Project O.G. - My First Ever Build - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72BlckButy · 12-23-2012, 05:05 PM

bump for an answer for cericd.

67c10rustbuket · 12-23-2012, 05:22 PM

I measure inside to inside of the backing plates or your location 2. Hereis a pic of my 5 lugger.
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

**lolife99** · 12-23-2012, 05:26 PM

Quote:

Originally Posted by cericd

So, I'm trying to determine which of the two different width 1970 C10 rear ends I have. I've been told that if I measure from backing plate to backing plate and it's 55.5" then it is the older 67-69 version and if it's 57" it's the 71-72 version. Well, I'm still not sure where to measure from. So here's a pic. Should I be measuring from spot #1 or spot #2 (or somewhere else entirely)?

I measure from 2 in your picture.

**CC69Rat** · 12-23-2012, 10:06 PM

Which one do you have?

Youre going on the Power Tour with us.. right?
Posted via Mobile Device

**cericd** · 02-07-2013, 03:24 PM

I have the later/wider rear end.

**CC69Rat** · 02-07-2013, 03:41 PM

Chris -- you ordering axles for it ? I understand Buck found some conversion axles at Advance Auto Parts. $158.xx shipped to your door. Did you see that thread?

Your axles will be 31 5/16" long. They're easy to swap out. That will give you a lot of options for wheels too. 6 lug steelies are kinda hard to come by.

**cericd** · 02-07-2013, 06:32 PM

No I didn't see that thread. Got a link? Is he the one with the sweet stepper? How do those axels compare to the ones u hit for your gmc?
Posted via Mobile Device

twangismythang · 02-07-2013, 11:54 PM

subscribed, cant wait to see what ya do with the drop....
Posted via Mobile Device

**CC69Rat** · 02-08-2013, 09:07 AM

Chris -- here's that thread on the conversion axles. http://67-72chevytrucks.com/vboard/s...d.php?t=564907

How do they compare to Moser? Not really sure man .. other than price.

Remember you'll need new bearings and seals too. ~$40

It took Dad and I maybe a total of two hours to do the full swap. The key is going to be the bolt that holds the Pin in place. 95% chance it will break when it comes out. If it does, don't worry. PM me, I've got the fix for it. It's all pretty common. Mine broke when I took it out.

C10_ustacould · 03-30-2013, 08:15 PM

Chris, I am very happy with my axle purchase. You just can't beat the price! You found a sweet truck to begin your project, so clean... I am jealous! Anymore progress?

**CC69Rat** · 03-30-2013, 08:21 PM

Chris!.. where you been bro?
Posted via Mobile Device

71chevswb · 05-14-2013, 09:54 PM

Any updates? What's your avatar a picture of? Looks cool.
Posted via Mobile Device

**cericd** · 05-14-2013, 10:34 PM

Quote:

Originally Posted by 71chevswb

Any updates? What's your avatar a picture of? Looks cool.
Posted via Mobile Device

Here is the original pic that my avatar is based on and the photoshop that CC69Rat's dad did for me prior to me buying my truck. He was trying to show me the possibilities of my truck with a just drop and some rims.

**cericd** · 05-14-2013, 10:51 PM

Well guys, as far as updates go. Life is a funny thing. Right when you get used to the status quo, life throws a few curve balls your way. Just to keep things interesting you know? So here's a list of the curve balls I've received in the last couple months.

1. 70ft section of hurricane fence had the bottoms of the poles rust out causing the fence to lay down (somehow I missed the rust a year and a half ago when we bought this house)

2. house got termites

3. a woman attempting to turn left swung wide (right) into my daily driver Mazda 3 as I was going straight beside her through an intersection. (Fortunately she had insurance)

3a. The body shop took over a month and a week to properly fix my Mazda. (Too long of a story)

4. When I finally got my car back. I noticed a clunking and squeaking sound in the rear end. Turned out to be the rear shocks and swaybar end links.

5. Got the Mazda back again and a week later both low beam headlights stopped working. Oh yeah and the water pump started leaking.

So, while life was just keeping things interesting, it was siphoning cash away from my truck fund. I mean hey, I guess all that qualifies as updates. Just not the updates I would have chosen

Rusbuilt · 05-15-2013, 09:00 AM

Chris I know the feeling. Life has its ways of sneaking in and robbing the joy from truck building! lol But then there are things in life that are worth taking time from the truck thing, example... My wife and I just had our first little one! He is 7 weeks old now and I have found being a dad is amazing! I hope you can get back on your truck soon! Its looking good!!

**cericd** · 05-15-2013, 09:27 AM

Thanks Rus. Congrats on your first child. I won't complain too much, these things happen.

**CC69Rat** · 05-15-2013, 09:39 AM

Chris --

Hang in there man. Life just happens sometimes. Ex. Read back over your post. Ask yourself what could you have done differently? I can't think of anything.. See what I mean? I am a worrier and stress over stuff too man but I just turned 40. I made a commitment to myself that I was going to get over stuff. Just ask yourself had it never happened is there anything I could have done to prevent it? .. well, not really. So why beat yourself up. I know it sucks but you just gotta pick up what you can and run with it.

The good thing about your truck is the longer you keep it, the more it's worth. The truck is not going anywhere, it's not eating anything. .. hang on to it as long as you can. They're getting super hard to find. I know what you paid for that truck and I can tell you with 100% certainty you could sell it right now and make a profit on it. Put $2k in a good 4/6 drop and a set of wheels and your profit margin goes even higher.

With these trucks, IMO it's all about the stance. You have to get it looking clean, but agressive too. Not over done but a stock looking truck with modern features, suspension, wheels, engines, etc. is really popular right now. These trucks are finally gaining some respect among the First Gen Camaros for example. I bought a running and driving 1969 Camaro for $2,300 when I was 18yrs old. Original California car, you could eat off the floor pans. Now, you couldn't touch that same car for less than $15k.

What I'm saying is there's no love lost in your truck. It can wait. .. take it one day at a time, do what you have to do and one day you'll turn around and the truck will be done.

**cericd** · 05-15-2013, 09:58 AM

Thanks Chad. I wasn't really trying to complain. I just wanted to inform my forum buddies why this page has gone unchanged for so long. But I know what you mean about being a worrier. I tend to overthink and worry more than most. I will say this, don't buy a fixer up house and fixer up truck at the same time

Posted via Mobile Device

**CC69Rat** · 05-15-2013, 10:10 AM

LOL! I'm right there with you buddy. I have my master bathroom gutted at the moment.. moving a wall, new floor, plumbing, moved a jetted tub, tile, new linen closet, drywall .. yeah, it's fun.

It has taken a lot of my truck time too but sometimes you just have to do the best you can.

**cericd** · 05-15-2013, 10:26 AM

Man, after seeing that list of all the house stuff you've been working on just makes your truck look that much more impressive.

Oh, and I gotta say this, all the "worrying" you went through when choosing your wheels was well worth it. You nailed it!

original-71 · 05-15-2013, 03:45 PM

man brother sorry for all the things that has happened, hope you get the chance to work on your truck soon.

**cericd** · 05-15-2013, 04:23 PM

Thanks Hector. Remember that time I was gonna come by and see your truck? When I got ahold of you that afternoon my gps said I was six minutes from your house. Lol. I need to figure out a time we can meet up. I really want to see how the ece setup rides without a c-Notch. Thanks for the encouragement.
Posted via Mobile Device

original-71 · 05-15-2013, 04:33 PM

Quote:

Originally Posted by cericd

Thanks Hector. Remember that time I was gonna come by and see your truck? When I got ahold of you that afternoon my gps said I was six minutes from your house. Lol. I need to figure out a time we can meet up. I really want to see how the ece setup rides without a c-Notch. Thanks for the encouragement.
Posted via Mobile Device

i should be home all this weekend if you wanna come by you are welcome. besides i need a reason to get the truck out of the garage

Jimbabwe · 07-07-2013, 09:42 PM

**CC69Rat** · 07-07-2013, 09:46 PM

^^ that's what I'm talking about..

Posted via Mobile Device

12-23-2012, 05:05 PM	#51
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project O.G. - My First Ever Build bump for an answer for cericd. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

12-23-2012, 05:22 PM	#52
67c10rustbuket Registered User Join Date: Apr 2011 Location: Mustang, Oklahoma Posts: 2,806	Re: Project O.G. - My First Ever Build I measure inside to inside of the backing plates or your location 2. Hereis a pic of my 5 lugger. Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device Attached Images __________________ Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car

12-23-2012, 10:06 PM	#54
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: Project O.G. - My First Ever Build Which one do you have? Youre going on the Power Tour with us.. right? Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

02-07-2013, 03:24 PM	#55
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,155	Re: Project O.G. - My First Ever Build I have the later/wider rear end.

02-07-2013, 03:41 PM	#56
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: Project O.G. - My First Ever Build Chris -- you ordering axles for it ? I understand Buck found some conversion axles at Advance Auto Parts. $158.xx shipped to your door. Did you see that thread? Your axles will be 31 5/16" long. They're easy to swap out. That will give you a lot of options for wheels too. 6 lug steelies are kinda hard to come by. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

02-07-2013, 06:32 PM	#57
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,155	Re: Project O.G. - My First Ever Build No I didn't see that thread. Got a link? Is he the one with the sweet stepper? How do those axels compare to the ones u hit for your gmc? Posted via Mobile Device

02-07-2013, 11:54 PM	#58
twangismythang Registered User Join Date: Oct 2012 Location: Memphis, Tn. Posts: 219	Re: Project O.G. - My First Ever Build subscribed, cant wait to see what ya do with the drop.... Posted via Mobile Device __________________ Victory will only be achieved through superior firepower and trusting in the Lord. SOLD 68 C-10. http://67-72chevytrucks.com/vboard/s...d.php?t=560975 SOLD 2000 Silverado...http://67-72chevytrucks.com/vboard/s...=1#post6492671 87 V-10 4X4 http://67-72chevytrucks.com/vboard/s...d.php?t=643898

02-08-2013, 09:07 AM	#59
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: Project O.G. - My First Ever Build Chris -- here's that thread on the conversion axles. http://67-72chevytrucks.com/vboard/s...d.php?t=564907 How do they compare to Moser? Not really sure man .. other than price. Remember you'll need new bearings and seals too. ~$40 It took Dad and I maybe a total of two hours to do the full swap. The key is going to be the bolt that holds the Pin in place. 95% chance it will break when it comes out. If it does, don't worry. PM me, I've got the fix for it. It's all pretty common. Mine broke when I took it out. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

03-30-2013, 08:15 PM	#60
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Project O.G. - My First Ever Build Chris, I am very happy with my axle purchase. You just can't beat the price! You found a sweet truck to begin your project, so clean... I am jealous! Anymore progress? __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

03-30-2013, 08:21 PM	#61
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: Project O.G. - My First Ever Build Chris!.. where you been bro? Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

05-14-2013, 09:54 PM	#62
71chevswb Registered User Join Date: Oct 2011 Location: NorthWest Posts: 131	Re: Project O.G. - My First Ever Build Any updates? What's your avatar a picture of? Looks cool. Posted via Mobile Device

05-14-2013, 10:51 PM	#64
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,155	Re: Project O.G. - My First Ever Build Well guys, as far as updates go. Life is a funny thing. Right when you get used to the status quo, life throws a few curve balls your way. Just to keep things interesting you know? So here's a list of the curve balls I've received in the last couple months. 1. 70ft section of hurricane fence had the bottoms of the poles rust out causing the fence to lay down (somehow I missed the rust a year and a half ago when we bought this house) 2. house got termites 3. a woman attempting to turn left swung wide (right) into my daily driver Mazda 3 as I was going straight beside her through an intersection. (Fortunately she had insurance) 3a. The body shop took over a month and a week to properly fix my Mazda. (Too long of a story) 4. When I finally got my car back. I noticed a clunking and squeaking sound in the rear end. Turned out to be the rear shocks and swaybar end links. 5. Got the Mazda back again and a week later both low beam headlights stopped working. Oh yeah and the water pump started leaking. So, while life was just keeping things interesting, it was siphoning cash away from my truck fund. I mean hey, I guess all that qualifies as updates. Just not the updates I would have chosen __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

05-15-2013, 09:00 AM	#65
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Project O.G. - My First Ever Build Chris I know the feeling. Life has its ways of sneaking in and robbing the joy from truck building! lol But then there are things in life that are worth taking time from the truck thing, example... My wife and I just had our first little one! He is 7 weeks old now and I have found being a dad is amazing! I hope you can get back on your truck soon! Its looking good!! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

05-15-2013, 09:27 AM	#66
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,155	Re: Project O.G. - My First Ever Build Thanks Rus. Congrats on your first child. I won't complain too much, these things happen. __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

05-15-2013, 09:39 AM	#67
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: Project O.G. - My First Ever Build Chris -- Hang in there man. Life just happens sometimes. Ex. Read back over your post. Ask yourself what could you have done differently? I can't think of anything.. See what I mean? I am a worrier and stress over stuff too man but I just turned 40. I made a commitment to myself that I was going to get over stuff. Just ask yourself had it never happened is there anything I could have done to prevent it? .. well, not really. So why beat yourself up. I know it sucks but you just gotta pick up what you can and run with it. The good thing about your truck is the longer you keep it, the more it's worth. The truck is not going anywhere, it's not eating anything. .. hang on to it as long as you can. They're getting super hard to find. I know what you paid for that truck and I can tell you with 100% certainty you could sell it right now and make a profit on it. Put $2k in a good 4/6 drop and a set of wheels and your profit margin goes even higher. With these trucks, IMO it's all about the stance. You have to get it looking clean, but agressive too. Not over done but a stock looking truck with modern features, suspension, wheels, engines, etc. is really popular right now. These trucks are finally gaining some respect among the First Gen Camaros for example. I bought a running and driving 1969 Camaro for $2,300 when I was 18yrs old. Original California car, you could eat off the floor pans. Now, you couldn't touch that same car for less than $15k. What I'm saying is there's no love lost in your truck. It can wait. .. take it one day at a time, do what you have to do and one day you'll turn around and the truck will be done. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)



Register or Log In To remove these advertisements.

05-15-2013, 09:58 AM	#68
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,155	Re: Project O.G. - My First Ever Build Thanks Chad. I wasn't really trying to complain. I just wanted to inform my forum buddies why this page has gone unchanged for so long. But I know what you mean about being a worrier. I tend to overthink and worry more than most. I will say this, don't buy a fixer up house and fixer up truck at the same time Posted via Mobile Device __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

05-15-2013, 10:10 AM	#69
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: Project O.G. - My First Ever Build LOL! I'm right there with you buddy. I have my master bathroom gutted at the moment.. moving a wall, new floor, plumbing, moved a jetted tub, tile, new linen closet, drywall .. yeah, it's fun. It has taken a lot of my truck time too but sometimes you just have to do the best you can. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

05-15-2013, 10:26 AM	#70
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,155	Re: Project O.G. - My First Ever Build Man, after seeing that list of all the house stuff you've been working on just makes your truck look that much more impressive. Oh, and I gotta say this, all the "worrying" you went through when choosing your wheels was well worth it. You nailed it! __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

05-15-2013, 03:45 PM	#71
original-71 ///Relaxed Atmosphere Join Date: May 2010 Location: Houston,Tx Posts: 1,266	Re: Project O.G. - My First Ever Build man brother sorry for all the things that has happened, hope you get the chance to work on your truck soon. __________________ 71-Cheyenne Super (E.C.E Static Drop 4.5/7". Intro Rally's 20X8.5 5" B.S 255/35/20 (F) 20X10 5.25 B.S 275/35/20 (R) 87-Silverado Static Drop 5/7" Raceline Explosion 5 22X8.5 (F) 22X10 (R) hector _________________________________ 1971 Chevrolet Cheyenne Super 1987 Chevrolet Silverado 2006 Ford Mustang GT 2012 Toyota 4-Runner 2014 Dodge Ram 1500 Sport Crew Cab

05-15-2013, 04:23 PM	#72
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,155	Re: Project O.G. - My First Ever Build Thanks Hector. Remember that time I was gonna come by and see your truck? When I got ahold of you that afternoon my gps said I was six minutes from your house. Lol. I need to figure out a time we can meet up. I really want to see how the ece setup rides without a c-Notch. Thanks for the encouragement. Posted via Mobile Device __________________ Chris My 1970 SWB C/10 - https://67-72chevytrucks.com/vboard/...d.php?t=534872

07-07-2013, 09:42 PM	#74
Jimbabwe Registered User Join Date: Dec 2011 Location: New York City Posts: 648	Re: Project O.G. - My First Ever Build Attached Images

07-07-2013, 09:46 PM	#75
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,214	Re: Project O.G. - My First Ever Build ^^ that's what I'm talking about.. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

Register or Log In To remove these advertisements.