New un-named crew cab project...... - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mcbassin · 01-17-2013, 08:55 PM

Hey Joe, where you at?
Posted via Mobile Device

kustomrust82 · 01-18-2013, 11:45 AM

that interior is clean! ive never seen a dash pad that nice before! looks like a good solid truck good luck with it!

joe231 · 11-09-2013, 08:24 PM

Sorry guys,

I haven't been on here much to some time.

Haven't done much funn stuff to this either.
I had to replace the head gaskets, joy lol
Then I had problems getting the valve covers to seal.
Ended up leaking oil everywhere. I finally got the leaks fixed and was under the truck cleaning it up. I found out that the front springs have an add-a-leaf.
That explains why it sits higher.
I'm thinking I might ditch the add-a-leaf and swap in an EZ-inch instead. Hopefully it will help the rough ride.

C@rnut001 · 11-09-2013, 09:59 PM

Well, it is good to see you on here Joe. Keep up the work on your trucks and I hope you have a good winter.

joe231 · 11-09-2013, 10:18 PM

Thanks Owen!
You too!
Did you get moved to the valley?

C@rnut001 · 11-10-2013, 05:48 PM

Well, Joe, I moved to the valley and I have already moved back to a village. I finished my PhD in Education and I now live in a small village north of Kotzebue. I had bought an '86 GMC but it blew up this summer and I sold it (it had a 4.3L V6, one of the first in a 3/4 ton truck). I will be looking for another truck this summer. It is great to hear you are still working on your trucks.

joe231 · 11-10-2013, 05:56 PM

Right on
What is the name of the village?

C@rnut001 · 11-10-2013, 07:58 PM

I now live in Kiana. It is beautiful up here and I hope to do some hunting after this year. We have a lot of caribou and moose up here.

joe231 · 11-10-2013, 08:13 PM

Cool

scotts62 · 12-26-2013, 09:15 AM

Hey im late but better than never!

joe231 · 12-26-2013, 12:33 PM

Haha
Right on!

joe231 · 07-11-2014, 02:55 AM

I decided to throw some military 37's on my truck
Name: image.jpg
Views: 590
Size: 66.5 KB

(I got a load of stuff headed for the dump in the back so she is squatting a bit.)

joe231 · 07-11-2014, 02:59 AM

Name: image.jpg
Views: 583
Size: 65.7 KB

I have to do some trimming. I'm also planing on lifting the truck sooner or later. Just gotta gather up a few more parts....

MTCK · 07-11-2014, 03:07 AM

Looks tough! Just go straight!

joe231 · 07-11-2014, 03:17 AM

Thanks!!
Lol
It actually clears the front fenders lock to lock but it is close in a couple spots.
It will most likely rub with articulation while turning. I'm just gonna trim the lower corners for now.

Hankster · 07-11-2014, 01:42 PM

Looks good with the military tires on it.

COS399 · 07-12-2014, 01:28 AM

I got your twin, except I had to put a 4L80 in mine.

I got a couple of 6.2 engines you can have. It's just getting them up there that would make it cost prohibitive.

joe231 · 07-12-2014, 03:40 AM

Thanks Hank!

Cos
That's cool! Does your truck have a number painted on the roof?
Are you running a 4L80E behind your cummins?

Is love to have those 6.2's lol

COS399 · 07-12-2014, 09:52 AM

Quote:

Originally Posted by joe231

Cos
That's cool! Does your truck have a number painted on the roof?
Are you running a 4L80E behind your cummins?

Is love to have those 6.2's lol

No, mine doesn't have a number on the roof. Not sure if it ever did. I know at some point it must have been repainted though. The front end has some light blue showing in places and it is a GMC but has a Chevy grille and had a Chevy tailgate.

As for the 4L80 behind the Cummins, Yes I removed the TH400 and put in the 4L80 since mine is also geared with 4.10 gears in the differentials.

scotts62 · 07-18-2014, 11:59 AM

Looking good Joe!!!!

joe231 · 07-20-2014, 05:41 PM

Thanks Scott!!

I did some trimming

Name: image.jpg
Views: 460
Size: 46.0 KB

joe231 · 07-20-2014, 05:43 PM

Name: image.jpg
Views: 445
Size: 47.3 KB

joe231 · 07-20-2014, 05:46 PM

And a pic of my son Zack's CCSB next to mine last night at Jim Creek
Name: image.jpg
Views: 459
Size: 35.8 KB

My truck does much better on the beach now with the larger tires, before I had so air down some... Not anymore

y5mgisi · 07-20-2014, 10:47 PM

Looks rugged! I like it!

C@rnut001 · 07-20-2014, 11:19 PM

Man, your truck is looking great. I hope your summer is going well. I am currently trying to buy a K5 Chevy Blazer here in my village (it is a '76 or so and has been sitting a bit). Keep working on your trucks, it is great to see an update.

01-17-2013, 08:55 PM	#76
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: New un-named crew cab project...... Hey Joe, where you at? Posted via Mobile Device __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

01-18-2013, 11:45 AM	#77
kustomrust82 Registered User Join Date: Jan 2013 Location: Tampa, Fl Posts: 59	Re: New un-named crew cab project...... that interior is clean! ive never seen a dash pad that nice before! looks like a good solid truck good luck with it! __________________ '82 c10 shortbed drag truck '82 GMC 3500 Dually DD scrap truck '55 Chevy 210 4 door sled '65 VW Bug Rat Rod

11-09-2013, 08:24 PM	#78
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: New un-named crew cab project...... Sorry guys, I haven't been on here much to some time. Haven't done much funn stuff to this either. I had to replace the head gaskets, joy lol Then I had problems getting the valve covers to seal. Ended up leaking oil everywhere. I finally got the leaks fixed and was under the truck cleaning it up. I found out that the front springs have an add-a-leaf. That explains why it sits higher. I'm thinking I might ditch the add-a-leaf and swap in an EZ-inch instead. Hopefully it will help the rough ride. __________________ *CHEVY ONLY*

11-09-2013, 09:59 PM	#79
C@rnut001 Registered User Join Date: Dec 2011 Location: Alaska Posts: 405	Re: New un-named crew cab project...... Well, it is good to see you on here Joe. Keep up the work on your trucks and I hope you have a good winter. __________________ C@rnut001 (Owen) Alaskan Members Check In http://67-72chevytrucks.com/vboard/s...22#post5094422 http://67-72chevytrucks.com/vboard/s...18#post6778618

11-09-2013, 10:18 PM	#80
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: New un-named crew cab project...... Thanks Owen! You too! Did you get moved to the valley? __________________ *CHEVY ONLY*

11-10-2013, 05:48 PM	#81
C@rnut001 Registered User Join Date: Dec 2011 Location: Alaska Posts: 405	Re: New un-named crew cab project...... Well, Joe, I moved to the valley and I have already moved back to a village. I finished my PhD in Education and I now live in a small village north of Kotzebue. I had bought an '86 GMC but it blew up this summer and I sold it (it had a 4.3L V6, one of the first in a 3/4 ton truck). I will be looking for another truck this summer. It is great to hear you are still working on your trucks. __________________ C@rnut001 (Owen) Alaskan Members Check In http://67-72chevytrucks.com/vboard/s...22#post5094422 http://67-72chevytrucks.com/vboard/s...18#post6778618

11-10-2013, 05:56 PM	#82
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: New un-named crew cab project...... Right on What is the name of the village? __________________ *CHEVY ONLY*

11-10-2013, 07:58 PM	#83
C@rnut001 Registered User Join Date: Dec 2011 Location: Alaska Posts: 405	Re: New un-named crew cab project...... I now live in Kiana. It is beautiful up here and I hope to do some hunting after this year. We have a lot of caribou and moose up here. __________________ C@rnut001 (Owen) Alaskan Members Check In http://67-72chevytrucks.com/vboard/s...22#post5094422 http://67-72chevytrucks.com/vboard/s...18#post6778618

11-10-2013, 08:13 PM	#84
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: New un-named crew cab project...... Cool __________________ *CHEVY ONLY*

12-26-2013, 09:15 AM	#85
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: New un-named crew cab project...... Hey im late but better than never! __________________ Scott 93 crew cab build Project 62

12-26-2013, 12:33 PM	#86
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: New un-named crew cab project...... Haha Right on! __________________ *CHEVY ONLY*

07-11-2014, 02:55 AM	#87
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: New un-named crew cab project...... I decided to throw some military 37's on my truck (I got a load of stuff headed for the dump in the back so she is squatting a bit.) __________________ *CHEVY ONLY*

07-11-2014, 02:59 AM	#88
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: New un-named crew cab project...... I have to do some trimming. I'm also planing on lifting the truck sooner or later. Just gotta gather up a few more parts.... __________________ *CHEVY ONLY*

07-11-2014, 03:07 AM	#89
MTCK Registered User Join Date: Dec 2009 Location: Fairbanks, AK Posts: 1,830	Re: New un-named crew cab project...... Looks tough! Just go straight! __________________ -Marcus 1991 V3500 L29 454 4L80E NP205 D60/14 Bolt 4.56's 1984 K30 292 TH400 NP205 D60/14 Bolt 4.56's flat bed 7'6" Meyer Plow 2022 Silverado 3500 L8T Project Daily Driver Project Heavy Hauler Project Plow Truck

07-11-2014, 03:17 AM	#90
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: New un-named crew cab project...... Thanks!! Lol It actually clears the front fenders lock to lock but it is close in a couple spots. It will most likely rub with articulation while turning. I'm just gonna trim the lower corners for now. __________________ *CHEVY ONLY*



Register or Log In To remove these advertisements.

07-11-2014, 01:42 PM	#91
Hankster Registered User Join Date: Jan 2013 Location: Nacogdoches, Texas Posts: 895	Re: New un-named crew cab project...... Looks good with the military tires on it. __________________ Current Build 89 s10 ecsb 2wd 4.3/700r4 50k OG Miles Instagram- shaggin_s10 '86 Chevrolet C10 Custom Deluxe - Gen V 454 - 4l80e - welded 12 bolt (Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=611611 ) SOLD

07-12-2014, 01:28 AM	#92
COS399 Registered User Join Date: Dec 2013 Location: Northern, MT Posts: 569	Re: New un-named crew cab project...... I got your twin, except I had to put a 4L80 in mine. I got a couple of 6.2 engines you can have. It's just getting them up there that would make it cost prohibitive. Attached Images __________________ 1987 GMC R2500 SC 454 T400 1988 Chevy R30 CC DRW 12 valve Cummins NV4500 GearVendors

07-12-2014, 03:40 AM	#93
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: New un-named crew cab project...... Thanks Hank! Cos That's cool! Does your truck have a number painted on the roof? Are you running a 4L80E behind your cummins? Is love to have those 6.2's lol __________________ *CHEVY ONLY*

07-18-2014, 11:59 AM	#95
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: New un-named crew cab project...... Looking good Joe!!!! __________________ Scott 93 crew cab build Project 62

07-20-2014, 05:41 PM	#96
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: New un-named crew cab project...... Thanks Scott!! I did some trimming __________________ *CHEVY ONLY*

07-20-2014, 05:43 PM	#97
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: New un-named crew cab project...... __________________ *CHEVY ONLY*

07-20-2014, 05:46 PM	#98
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: New un-named crew cab project...... And a pic of my son Zack's CCSB next to mine last night at Jim Creek My truck does much better on the beach now with the larger tires, before I had so air down some... Not anymore __________________ *CHEVY ONLY*

07-20-2014, 10:47 PM	#99
y5mgisi Second Chance Program Join Date: Jun 2006 Location: Portland, OR Posts: 2,642	Re: New un-named crew cab project...... Looks rugged! I like it! __________________ 90 Chevy Suburban 2500 5.3 swap/th400/np241/14bltSF/10blt. 77 C20 crew cab Silverado. 396/th400. In work.

07-20-2014, 11:19 PM	#100
C@rnut001 Registered User Join Date: Dec 2011 Location: Alaska Posts: 405	Re: New un-named crew cab project...... Man, your truck is looking great. I hope your summer is going well. I am currently trying to buy a K5 Chevy Blazer here in my village (it is a '76 or so and has been sitting a bit). Keep working on your trucks, it is great to see an update. __________________ C@rnut001 (Owen) Alaskan Members Check In http://67-72chevytrucks.com/vboard/s...22#post5094422 http://67-72chevytrucks.com/vboard/s...18#post6778618

Register or Log In To remove these advertisements.