LA 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gringoloco · 01-27-2013, 10:23 PM

6.0 LQ4, complete with all accessories and wiring harness, ECM, and sensors (not pictured). Ran before pulled, though I had planned on a rebuild.

SOLD I am willing to crate and ship or hold for pickup for a short time.

I need this gone, it's sitting on my only engine stand!

gringoloco · 01-27-2013, 10:29 PM

799 cylinder heads, these are the same casting as the highly desirable 243/LS6 heads, but without the sodium filled valves. This is the best cathedral port head GM produced. Removed from an 18,000 mile engine. These are bolt-on and go heads. Fully assembled with rocker arms and covers.

SOLD

gringoloco · 01-27-2013, 10:35 PM

Comp Cams XR273HR. 220/224, .530/.534, 112 LSA camshaft. Gently used low miles. Great truck cam.

SOLD

gringoloco · 01-27-2013, 10:39 PM

LS2 camshaft and 'yellow' springs. Pulled from a low mile '06 Trailblazer.

SOLD

gringoloco · 01-27-2013, 10:44 PM

LSA oil pan. Includes pickup, dipstick, windage tray, bolts, and gasket. This is a new take-off from a never run engine.

SOLD

gringoloco · 01-27-2013, 10:56 PM

Pacesetter ceramic coated long tube headers, 72C2276. These are designed to fit a Trailblazer SS, but should fit our trucks.

SOLD

gringoloco · 01-27-2013, 10:59 PM

Edelbrock coil covers. Cast aluminum, brand new in box. Includes all hardware and instructions.

SOLD

gringoloco · 01-27-2013, 11:05 PM

Kwik Performance A/C bracket. Mounts Sanden style compressor to LS motor. Designed for truck style accessories.

SOLD

gringoloco · 01-27-2013, 11:08 PM

Bowtie Overdrives TV Made EZ bracket and cable to use a 700R4 behind an LS motor.

SOLD

gringoloco · 01-27-2013, 11:12 PM

Fel-Pro LS cylinder head bolts. Full set.

SOLD

gringoloco · 01-27-2013, 11:16 PM

Coolant temperature sender. Works with stock truck gauge, turned down to fit LS cylinder head.

SOLD

chevydog66 · 01-27-2013, 11:17 PM

How many miles on the 6.0?

gringoloco · 01-27-2013, 11:22 PM

Quote:

Originally Posted by chevydog66

How many miles on the 6.0?

Unknown. It was not original to the truck I pulled it from, which had about 250k on it. I do not know when it was replaced. This was from a '00 truck. It has decent, but not great compression. I had planned on a rebuild.

5150 · 01-27-2013, 11:59 PM

I'll take the temp sender.

Nohatch · 01-28-2013, 12:16 AM

Pm sent on headers, oil pan and sending unit. thanks

Number98 · 01-28-2013, 12:32 AM

Quote:

Originally Posted by gringoloco

LSA oil pan. Includes pickup, dipstick, windage tray, bolts, and gasket. This is a new take-off from a never run engine.

$150 plus shipping

I will take this if it's still up for grabs..

gringoloco · 01-28-2013, 12:49 AM

Quote:

Originally Posted by 5150

I'll take the temp sender.

Sending PM for pmt info

Quote:

Originally Posted by Nohatch

Pm sent on headers, oil pan and sending unit. thanks

PM returned

Quote:

Originally Posted by Number98

I will take this if it's still up for grabs..

Nohatch showed interest first, I'll let you know if he passes
Posted via Mobile Device

greens69 · 01-28-2013, 01:04 AM

Put me in line for the oil pan if it gets this far....

I will take the Kwik bracket if still available.

Thanks
Posted via Mobile Device

gringoloco · 01-28-2013, 01:26 AM

Quote:

Originally Posted by greens69

Put me in line for the oil pan if it gets this far....

I will take the Kwik bracket if still available.

Thanks
Posted via Mobile Device

Pan is pending. Bracket is yours. PM sent.
Posted via Mobile Device

exploderjim · 01-28-2013, 07:25 AM

I will take the coil covers. Pm me instructions for payment and shipping.
Posted via Mobile Device

jmedero · 01-28-2013, 07:50 AM

Did I miss how much for the heads?
Posted via Mobile Device

gringoloco · 01-28-2013, 08:22 AM

Quote:

Originally Posted by exploderjim

I will take the coil covers. Pm me instructions for payment and shipping.
Posted via Mobile Device

Pm coming your way

Quote:

Originally Posted by jmedero

Did I miss how much for the heads?
Posted via Mobile Device

Oops! $250 plus ship
Posted via Mobile Device

1970 C10 MJW · 01-28-2013, 09:16 AM

I will take the heads..

rmvlt1100 · 01-28-2013, 10:14 AM

Quote:

Originally Posted by gringoloco

Edelbrock coil covers. Cast aluminum, brand new in box. Includes all hardware and instructions.

$100 plus shipping

I'm interest in the coil covers if they haven't sold yet.

gringoloco · 01-28-2013, 10:53 AM

Quote:

Originally Posted by 1970 C10 MJW

I will take the heads..

Clear your PMs, I need a shipping addy for quote

Quote:

Originally Posted by rmvlt1100

I'm interest in the coil covers if they haven't sold yet.

Pending sale. Will let you know if it falls through

01-27-2013, 10:23 PM	#1
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts 6.0 LQ4, complete with all accessories and wiring harness, ECM, and sensors (not pictured). Ran before pulled, though I had planned on a rebuild. SOLD I am willing to crate and ship or hold for pickup for a short time. I need this gone, it's sitting on my only engine stand! Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 02-01-2013 at 09:28 PM.

01-27-2013, 10:29 PM	#2
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts 799 cylinder heads, these are the same casting as the highly desirable 243/LS6 heads, but without the sodium filled valves. This is the best cathedral port head GM produced. Removed from an 18,000 mile engine. These are bolt-on and go heads. Fully assembled with rocker arms and covers. SOLD Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 01-30-2013 at 12:29 AM.

01-27-2013, 10:35 PM	#3
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Comp Cams XR273HR. 220/224, .530/.534, 112 LSA camshaft. Gently used low miles. Great truck cam. SOLD Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 01-31-2013 at 08:45 PM.

01-27-2013, 10:39 PM	#4
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts LS2 camshaft and 'yellow' springs. Pulled from a low mile '06 Trailblazer. SOLD Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 01-29-2013 at 11:05 AM.

01-27-2013, 10:44 PM	#5
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts LSA oil pan. Includes pickup, dipstick, windage tray, bolts, and gasket. This is a new take-off from a never run engine. SOLD Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 01-28-2013 at 08:23 AM.

01-27-2013, 10:56 PM	#6
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Pacesetter ceramic coated long tube headers, 72C2276. These are designed to fit a Trailblazer SS, but should fit our trucks. SOLD Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 01-28-2013 at 08:23 AM.

01-27-2013, 10:59 PM	#7
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Edelbrock coil covers. Cast aluminum, brand new in box. Includes all hardware and instructions. SOLD Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 01-29-2013 at 11:05 AM.

01-27-2013, 11:05 PM	#8
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Kwik Performance A/C bracket. Mounts Sanden style compressor to LS motor. Designed for truck style accessories. SOLD Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 01-28-2013 at 10:57 AM.

01-27-2013, 11:08 PM	#9
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Bowtie Overdrives TV Made EZ bracket and cable to use a 700R4 behind an LS motor. SOLD Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 01-29-2013 at 11:05 AM.

01-27-2013, 11:12 PM	#10
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Fel-Pro LS cylinder head bolts. Full set. SOLD Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 01-29-2013 at 11:05 AM.

01-27-2013, 11:16 PM	#11
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Coolant temperature sender. Works with stock truck gauge, turned down to fit LS cylinder head. SOLD Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy Last edited by gringoloco; 01-28-2013 at 12:56 AM.

01-27-2013, 11:17 PM	#12
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts How many miles on the 6.0? __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

01-27-2013, 11:59 PM	#14
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts I'll take the temp sender. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

01-28-2013, 12:16 AM	#15
Nohatch Registered User Join Date: Jul 2006 Location: Ohio Posts: 83	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Pm sent on headers, oil pan and sending unit. thanks Last edited by Nohatch; 01-28-2013 at 12:33 AM.

01-28-2013, 01:04 AM	#18
greens69 Registered User Join Date: Oct 2000 Location: Tomball,Texas USA Posts: 324	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Put me in line for the oil pan if it gets this far.... I will take the Kwik bracket if still available. Thanks Posted via Mobile Device __________________ Houston and Dallas Autorama Show Chairman ///Relaxed Atmosphere 1969 Chevrolet C10 1972 Chevrolet 2WD Blazer 1987 GMC Sierra



Register or Log In To remove these advertisements.

01-28-2013, 07:25 AM	#20
exploderjim Registered User Join Date: Jan 2010 Location: Grimsby, Ontario Posts: 205	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts I will take the coil covers. Pm me instructions for payment and shipping. Posted via Mobile Device

01-28-2013, 07:50 AM	#21
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts Did I miss how much for the heads? Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-28-2013, 09:16 AM	#23
1970 C10 MJW Registered User Join Date: Aug 2012 Location: Indiana Posts: 470	Re: 6.0 LQ4, LS6 Heads, LS2 Cam, Comp Cam, Lots of LS Swap Parts I will take the heads.. __________________ 70 C10 working on a LSx swap 4.8L MS3 edelbrock pro flo intake, pacesetter long tubes, 4l60e 2500 stall hoping the tranny holds up lol

Register or Log In To remove these advertisements.