![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Feb 2013
Location: Pearland, TX
Posts: 137
|
'72 C-10, 402, is there a way to tell....
..what day my truck was made? I have got a manufactures date of 5/72, but was curious if there was a way to tell what day it was actually made on? I wasn't sure if Chevy's records got THAT specific, to be able to tell the exact day a truck was assembled, but figured you guys would know one way or the other.
The truck in question is: 1972 Chevy C-10 Manufactured 5/72 GVWR 5400 VIN CCE142A166054 W/Base 127 Model CE10934 C60 4 season air condition J70 Hydro Brake Booster M49 Turbo Hydra Matic U37 Cigarette Lighter 525 Light Yellow A11 Tinted Glass G50 Heavy Rear Springs L47 400 CID V-8 engine N40 Power Steering Z53 Amp-Oil-Temp gauge 600 Black Vinyl Trim I am not overly concerned at value of the truck...in fact, I could care less. I just want to see if there was that way of telling an exact date of production. Obviously narrowed it down to May of '72.. Truck was bought new, in Austin, TX from Henna Chevrolet, and guy I bought it from bought it @ 1996 with 20K original miles on it. So, I'm the third owner, and the 2nd owner went through the truck and made it a very nice truck. Repainted it, new interior. New ball joints, tie rods, shocks, brakes, master cylinder, rebuilt the rear end, added a 3.73 R&P and posi. Yanked motor, punched it .030 freshened it up, blah blah blah. I am just wanting to find out as much info as I can on the truck. Thanks guys |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Oct 2009
Location: Godley, TX
Posts: 17,963
|
Re: '72 C-10, 402, is there a way to tell....
welcome peepaw, very nice truck (description - pics! pics! pics!
![]() |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Aug 2008
Location: Cedar Park, Texas
Posts: 7,496
|
Re: '72 C-10, 402, is there a way to tell....
![]() OK, not "worthless", but I want to see it! |
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() Join Date: Aug 2008
Location: Cedar Park, Texas
Posts: 7,496
|
Re: '72 C-10, 402, is there a way to tell....
I ESPECIALLY want to see it, as it may be a truck my brother owned, judging by the SPID and the dates of ownership and mileage mentioned above. Is it Corvette/ Chrome yellow now? If so, I turned a lot of wrenches on it back in the 90's. My brother and I replaced the right inner fender and fender with oem parts from... you guessed it... Henna Chevrolet. We might also have replaced the radiator support...
|
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() Join Date: Feb 2003
Location: Gold Canyon Arizona
Posts: 4,337
|
Re: '72 C-10, 402, is there a way to tell....
welcome to the board! if it will help any mine was born mid feb 72 with vin seq #1424xx
__________________
1971 K5 CST Blazer 1965 Chevelle Malibu 283 (sadly sold) 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Feb 2013
Location: Pearland, TX
Posts: 137
|
Re: '72 C-10, 402, is there a way to tell....
OK guys, thanks for the replies, and here is a little more info:
The heads have been replaced with the 063 castings, and currently houses an Edelbrock Performer RPM, 3310 750 Vac Sec carb, hooker headers, Comp cam 218/224 .500/.500, crane roller rockers, 3/8 pushrods, comp lifters Turbo 400, 11" Hughes Converter. Tilton starter, aluminum water pump, MSD 6A, MSD Billet Dist, Coil and wires. Truck ran a 14.2 @ 102 with a horrible 2.3 60' Truck has been in storage last 5+ years, so needs some TLC. I have a rocker panel I have to replace...couple quarter size spots in lower doors. So, she's not perfect, by any means, but it's a nice driver, my kids love it (I think they like the General Lee Horn the most, LOL!!!!) Oh, spray in bed liner, etc... If you guys can tell me how to post up pics, I would be all too happy to for you....I am not what they call "computer literate", LOL!!! OH, but the block is original to the truck... Last edited by Peepaw; 02-10-2013 at 06:38 PM. |
![]() |
![]() |
![]() |
#7 | |
Registered User
Join Date: Feb 2013
Location: Pearland, TX
Posts: 137
|
Re: '72 C-10, 402, is there a way to tell....
Quote:
Well, guy I bought it from, is a friend of mine, and like I said, he bought it in mid 90's from guy in Austin. My friend...well, until we can find out more, I will give you his initials...how's that? R.M. |
|
![]() |
![]() |
![]() |
#8 |
Senior Member
![]() Join Date: Oct 2009
Location: Godley, TX
Posts: 17,963
|
Re: '72 C-10, 402, is there a way to tell....
To post pictures, use the "Post Reply" button on the LEFT side of the screen - or - select "Go Advanced" if entering a reply in the message box at the bottom of a screen. From there, click the paper clip on the top of the post entry box and it will allow you to browse for pics on your computer and include up to 5 per post.
|
![]() |
![]() |
![]() |
#9 |
Cluster King
![]() Join Date: Nov 2012
Location: Junction City, OR
Posts: 5,263
|
Re: '72 C-10, 402, is there a way to tell....
If it helps any, I found this date on my build sheet. It is 02-21-72. I am not sure if this is the day it rolled off the line or when the document was created.
Of course without the build sheet you would have to narrow it down like Jocko has suggested. |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Feb 2013
Location: Pearland, TX
Posts: 137
|
Re: '72 C-10, 402, is there a way to tell....
Fantastic guys...walking into little league meeting....I'll get some pics up after the meeting
Posted via Mobile Device |
![]() |
![]() |
![]() |
#11 |
Senior Member
![]() Join Date: Oct 2009
Location: Godley, TX
Posts: 17,963
|
Re: '72 C-10, 402, is there a way to tell....
Actually, I forgot about the build sheet! That does narrow it down quite a bit - I'm not sure what "sched" date means... Scheduled for what? Delivery? Completion? Start of the assembly line? But it had to be printed before the truck began assembly. Interesting!
|
![]() |
![]() |
![]() |
#12 | |
Senior Member
![]() Join Date: Aug 2008
Location: Cedar Park, Texas
Posts: 7,496
|
Re: '72 C-10, 402, is there a way to tell....
Quote:
Posted via Mobile Device |
|
![]() |
![]() |
![]() |
#13 |
Senior Member
![]() Join Date: Aug 2008
Location: Cedar Park, Texas
Posts: 7,496
|
Re: '72 C-10, 402, is there a way to tell....
Photos yet? The suspense is killing me!
Posted via Mobile Device |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,503
|
Re: '72 C-10, 402, is there a way to tell....
The broadcast sheet (aka build sheet) is going to be the closest date. As stated it was a scheduled build start date, but generally pretty close most of the time as I understand. Being as yours is an Atlanta there was likely never a sheet in your truck beyond maybe dealer delivery.
Date coded parts might help but the lead times from vendors were so variable it would at best be a guess unless you knew the truck to be completely stock. If everyone that had a close (4,5&6/72) 72 Alanta truck gave us their serial nuber and the build date on the blue door tag we might be able to weight it toward early or late May. For what it is worth your's is the highest 72 Atlanta serial number I have/remember seeing.
__________________
Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID ** Blazer SPID ** Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders ** Do you have a 1972 Plaid Pickup? ** Plaid Blazer ** Plaid Suburban |
![]() |
![]() |
![]() |
#15 |
Senior Member
![]() Join Date: Feb 2001
Location: New Madison, Ohio
Posts: 21,365
|
Re: '72 C-10, 402, is there a way to tell....
Hey Peepaw ...
First of all ![]() ![]() Check out the LINK below and you will get a lot of information. 1967-1972 VIN Number Codes http://67-72chevytrucks.com/Chevyear.html
__________________
A husband can be right...or...A husband can be happy. ![]() 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. ![]() 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc ![]() ![]() JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder! |
![]() |
![]() |
![]() |
#16 |
Registered User
![]() Join Date: May 2012
Location: Anton, Texas
Posts: 2,364
|
Re: '72 C-10, 402, is there a way to tell....
another welcome from a fellow Texan...
|
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Feb 2013
Location: Pearland, TX
Posts: 137
|
Re: '72 C-10, 402, is there a way to tell....
|
![]() |
![]() |
![]() |
#18 | |
Registered User
Join Date: Feb 2013
Location: Pearland, TX
Posts: 137
|
Re: '72 C-10, 402, is there a way to tell....
Quote:
GUys, Im sorry...got home LATE from that baseball meeting. Brought laptop to work this morning, was gonna post up pics for you all, BUT, I forgot the cable that attaches my camera to laptop!!!! However, I DO have pics on my cell phone and I can send some pics to someone, if they want to post those up (even have a video picking kids up from school and them sounding the general lee horn!!!) So, if someone wants pics earlier than @ 4:00 today, PM me your cell phone number, and I will be all too happy to send pics to it. If no one likes that route...then @ 4:00 today, I WILL post pics for you guys. ![]() |
|
![]() |
![]() |
![]() |
#19 | |
Registered User
Join Date: Feb 2013
Location: Pearland, TX
Posts: 137
|
Re: '72 C-10, 402, is there a way to tell....
Quote:
Atlanta? My truck, or the guy with build sheet? Speaking of, on my Mopars, build sheets under seat bottom cushions...same on the C-10? I am not holding my breath, as I am sure mine is LONG gone. Interior was gone trough about dozen years ago, including bench seat. So.... |
|
![]() |
![]() |
![]() |
#20 | |
Registered User
Join Date: Feb 2013
Location: Pearland, TX
Posts: 137
|
Re: '72 C-10, 402, is there a way to tell....
Quote:
Well, thank you sir! I've got family up close to you (Indiana and Michigan), and I was up there for Christmas to visit family. I will check out the link you provided...again, many thanks! ![]() |
|
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Feb 2013
Location: Pearland, TX
Posts: 137
|
Re: '72 C-10, 402, is there a way to tell....
Thanks for the kind welcome. I have been in Texas all my life, but as I get older, not sure how much longer I can take the summers. I work in my shop, and summers are killing me ![]() |
![]() |
![]() |
![]() |
#22 | |
Registered User
Join Date: Feb 2013
Location: Pearland, TX
Posts: 137
|
Re: '72 C-10, 402, is there a way to tell....
Quote:
I want to add some info for you to your Brother's truck. Since my friend bought it, it has been in good hands. Sure, there were MANY MANY MANY nights, where Top Fuel burnouts and Dukes of Hazzard were inflicted upon Old Yeller, but she was always well maintained. Motor came out in 2002..give or take. ARP main studs and rod bolts were added, TRW flat tops and the whole works balanced. Compression checks in @ 9.5:1. 063 castings were added, ported, valve job, Manley SS 2.19 and 1.88 valves added. Edelbrock Performer RPM, 750, MSd, blah blah blah. Turbo 400 built, 11" Hughes converter, rear end rebuilt, 3.73, posi. AC system gone through, and converted to R134. Thumping sound system. New carpet. Door panels. Weather stripping. Head lights. Spray in bed liner. Exhaust system. New front end (ball joints, tie rods, shocks, etc...) New master cylinder, rotors, calipers, pads, etc..Had truck repainted. My friend spent small fortune on the truck. Was used as a daily driver for a few years, until his commute became a lot further, and then he got married, bought house, no garage. Had kids. So, truck got put away 5 or 6 or 7 years ago into storage, where it has sat, for the most part, in hibernation. Occassionaly she was brought out for joy ride, but maybe 100 miles over last 5+ years has been placed on her. Odometer showing 80K. Truck has some rust in the rockers, and lower doors, and up top along roof line. But no serious cancer to speak of. He had bought one new rocker, which I am going to put on, but I need to pick up another one as well. If I am going to do one, might as well do both. The truck will be driven from my shop to home occasionally, pick kids up from school in it, taken to the track to see if we can't improve quite a bit on that 14.2 she ran 10 years ago. Plans call for bigger cam (convert over to a roller), single plane intake, and 850 4150. When my friend said he was finally selling it (got tired of the $170 a MONTH for storage last 5-7 years), he knew to call me. I told him dozen years ago, if he EVER sold it, I wanted it. Dozen years later, I have it. ![]() Truck is in good hands, again. ![]() |
|
![]() |
![]() |
![]() |
#23 | |
Registered User
Join Date: Aug 2010
Location: Edwards, CA
Posts: 7,503
|
Re: '72 C-10, 402, is there a way to tell....
Quote:
__________________
Thanks, Tim * VIN/Model Decoders * Power Team Charts (engine/transmission/gear ratio) * Post Your Pickup SPID ** Blazer SPID ** Suburban/Panel SPID * RTFM ... Read The Factory Manuals... download 'em here Highlanders ** Do you have a 1972 Plaid Pickup? ** Plaid Blazer ** Plaid Suburban Last edited by SS Tim; 02-11-2013 at 11:59 AM. |
|
![]() |
![]() |
![]() |
#24 | |
Registered User
Join Date: Feb 2013
Location: Pearland, TX
Posts: 137
|
Re: '72 C-10, 402, is there a way to tell....
Quote:
Roger that. This is actually my first go round with ANY vehicle with a BBC in it. I've made the Mopar (still my 1st TRUE love), the SBF, the SBC, and the LSx rounds (even managed to squeeze in a 287 Pontiac) over the years, but no real experience with the BBC. So, been doing some homework on it over at Hot Rodders . com, and they really didn't "specialize" in finding build dates and such on my truck, and is how I came across you guys. You type in 67-72 Chevy on Google, and this site pops up top. I am excited about the truck, and as many crazy things about it is, I am NOT a fan of Yellow vehicles. However, from day one, when I laid eye's on this truck some 12-15 years ago for the 1st time, it just "worked" on this truck. If weather holds out, I am taking her to the strip on Friday to see what she can do. I am also going to try and swap over to a serpentine belt setup before Friday, but we will shall see how it goes. |
|
![]() |
![]() |
![]() |
#25 |
Registered User
Join Date: Feb 2013
Location: Pearland, TX
Posts: 137
|
Re: '72 C-10, 402, is there a way to tell....
Well this is rather interesting. I followed link above, and according to my VIN, my truck is a 1972 model of course.
If you follow the Model # from glove box, it calls it s a '69. Says 5th number in model number (mine is CE10934), the 9 is the 5th #, and wold say it is a '69. So, maybe glovebox got swapped out, or something? Crazy thing is, all the options from Tag on glovebox door, match what my truck has. What are the odds of that? So, anyone care to share some light on the subject? |
![]() |
![]() |
![]() |
Bookmarks |
|
|