wilwood master cylinder install pics? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

texastrendz · 02-10-2013, 10:16 PM

Anyone got photos of an install on a 67-72 cab? How it bolts to the firewall and which mounting holes are used.

**lolife99** · 02-10-2013, 10:20 PM

Here you go,...

texastrendz · 02-10-2013, 10:24 PM

Nice, does it cover the entire hole in the fire wall since you only use the bottom holes? Did it come with the adapters you have in the picture on the brake line fittings?

**lolife99** · 02-10-2013, 10:26 PM

Yes and yes.

texastrendz · 02-10-2013, 10:28 PM

One more question, is it pretty much a bolt in with the brake rod and pedal?
My truck had a power brake setup from the factory.

**lolife99** · 02-10-2013, 10:31 PM

Mine had manual brakes,... and it was a direct bolt on.

texastrendz · 02-10-2013, 10:38 PM

No problem finding a manual setup, just glad it is a bolt up unit. Thanks for all the fast responses. Going to give Scotts Hotrod a call in the morning and get the order in.

**lolife99** · 02-10-2013, 10:45 PM

I ordered mine from Jegs.

texastrendz · 02-10-2013, 10:50 PM

Quote:

Originally Posted by lolife99

I ordered mine from Jegs.

He has helped me with some questions I have posted on this forum. Time to pay it foward and spend some money with them as they support the forum. Trying to spread it out with the vendors on the site.

Zoomin · 02-10-2013, 11:43 PM

Quote:

Originally Posted by texastrendz

He has helped me with some questions I have posted on this forum. Time to pay it foward and spend some money with them as they support the forum. Trying to spread it out with the vendors on the site.

Justin's a great guy to do business with.

68racer · 02-11-2013, 03:19 PM

lolife, which bore size did you use?

bruce bruce · 02-11-2013, 04:07 PM

Quote:

Originally Posted by texastrendz

He has helped me with some questions I have posted on this forum. Time to pay it foward and spend some money with them as they support the forum. Trying to spread it out with the vendors on the site.

Good to see that...I don't think Jeg's is a vendor on here

**lolife99** · 02-11-2013, 06:49 PM

Quote:

Originally Posted by 68racer

lolife, which bore size did you use?

1" bore.

**lolife99** · 02-11-2013, 06:49 PM

Quote:

Originally Posted by bruce bruce

Good to see that...I don't think Jeg's is a vendor on here

Nope.

wraprail · 02-11-2013, 07:51 PM

Quote:

Originally Posted by lolife99

1" bore.

I would assume you have 4 wheel disc with that 1" bore?
Hows the pedal?
I'm converting my power to manual and not sure which bore size is best. What calipers are you using?

Thanks
Posted via Mobile Device

**lolife99** · 02-11-2013, 08:07 PM

This truck is not on the road yet.

My '69 also has a 1" bore M/C with no booster.
It is a disc/drum set up.
Pedal effort is a little more than a truck with a booster,... but I think it's worth it to clean up the firewall.
I'm using Wilwood D52 calipers.

68racer · 02-11-2013, 08:44 PM

Thanks.

texastrendz · 02-11-2013, 09:52 PM

Just got off the phone with Justin at Scotts, got a killer price and service. Thanks again board vendors. Its on the way boys and girls.

Zoomin · 02-11-2013, 10:05 PM

Very nice. Be sure to let us know when you get it.

wraprail · 02-11-2013, 10:28 PM

One more question Keith if you don't mind ( and if it's ok with the OP I don't mean to threadjack) are you using an OE (or OE type) combination valve on either truck and if so are you also using an aftermarket adjustable prop valve in addition to the OE valve.
2 questions, sorry.

Thanks
Posted via Mobile Device

**lolife99** · 02-11-2013, 10:45 PM

My stepside has a SSBC prop valve mounted on the frame.

My '69 has a standard disc/drum prop valve that hangs below the M/C.

Zoomin · 02-11-2013, 11:12 PM

Nice workmanship on the line bending Keith!
Posted via Mobile Device

wraprail · 02-12-2013, 12:43 AM

Never seen that SSB valve before, nice piece but dude, that is the cleanest work on the lnstall/tube bending I have ever seen. Period. Anywhere. 180 into a 90 that close to a fitting? I would not believe that was even possible. I am seriously impressed.
BTW, thanks for the info....

**lolife99** · 02-12-2013, 07:46 AM

Quote:

Originally Posted by wraprail

Never seen that SSBC valve before,....

http://ssbrakes.com/c-407225-shop-by...ortioning.html

Wilwood also makes a cool "distribution system" that is also adjustable.
But I already had the SSBC unit.
http://www.wilwood.com/MasterCylinde...derValves.aspx

02-10-2013, 10:16 PM	#1
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	wilwood master cylinder install pics? Anyone got photos of an install on a 67-72 cab? How it bolts to the firewall and which mounting holes are used.

02-10-2013, 10:20 PM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: wilwood master cylinder install pics? Here you go,... Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

02-10-2013, 10:24 PM	#3
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: wilwood master cylinder install pics? Nice, does it cover the entire hole in the fire wall since you only use the bottom holes? Did it come with the adapters you have in the picture on the brake line fittings?

02-10-2013, 10:26 PM	#4
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: wilwood master cylinder install pics? Yes and yes. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

02-10-2013, 10:28 PM	#5
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: wilwood master cylinder install pics? One more question, is it pretty much a bolt in with the brake rod and pedal? My truck had a power brake setup from the factory.

02-10-2013, 10:31 PM	#6
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: wilwood master cylinder install pics? Mine had manual brakes,... and it was a direct bolt on. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

02-10-2013, 10:38 PM	#7
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: wilwood master cylinder install pics? No problem finding a manual setup, just glad it is a bolt up unit. Thanks for all the fast responses. Going to give Scotts Hotrod a call in the morning and get the order in.

02-10-2013, 10:45 PM	#8
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: wilwood master cylinder install pics? I ordered mine from Jegs. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

02-11-2013, 03:19 PM	#11
68racer Yeah baby! Join Date: Feb 2001 Location: United Kingdom Posts: 436	Re: wilwood master cylinder install pics? lolife, which bore size did you use? __________________ 11.37 @116

02-11-2013, 08:07 PM	#16
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: wilwood master cylinder install pics? This truck is not on the road yet. My '69 also has a 1" bore M/C with no booster. It is a disc/drum set up. Pedal effort is a little more than a truck with a booster,... but I think it's worth it to clean up the firewall. I'm using Wilwood D52 calipers. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

02-11-2013, 08:44 PM	#17
68racer Yeah baby! Join Date: Feb 2001 Location: United Kingdom Posts: 436	Re: wilwood master cylinder install pics? Thanks. __________________ 11.37 @116

02-11-2013, 09:52 PM	#18
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: wilwood master cylinder install pics? Just got off the phone with Justin at Scotts, got a killer price and service. Thanks again board vendors. Its on the way boys and girls.

02-11-2013, 10:05 PM	#19
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: wilwood master cylinder install pics? Very nice. Be sure to let us know when you get it. __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

02-11-2013, 10:28 PM	#20
wraprail Registered User Join Date: Sep 2010 Location: Lake Havasu City Arizona Posts: 863	Re: wilwood master cylinder install pics? One more question Keith if you don't mind ( and if it's ok with the OP I don't mean to threadjack) are you using an OE (or OE type) combination valve on either truck and if so are you also using an aftermarket adjustable prop valve in addition to the OE valve. 2 questions, sorry. Thanks Posted via Mobile Device

02-11-2013, 10:45 PM	#21
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: wilwood master cylinder install pics? My stepside has a SSBC prop valve mounted on the frame. My '69 has a standard disc/drum prop valve that hangs below the M/C. Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823



Register or Log In To remove these advertisements.

02-11-2013, 11:12 PM	#22
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: wilwood master cylinder install pics? Nice workmanship on the line bending Keith! Posted via Mobile Device __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

02-12-2013, 12:43 AM	#23
wraprail Registered User Join Date: Sep 2010 Location: Lake Havasu City Arizona Posts: 863	Re: wilwood master cylinder install pics? Never seen that SSB valve before, nice piece but dude, that is the cleanest work on the lnstall/tube bending I have ever seen. Period. Anywhere. 180 into a 90 that close to a fitting? I would not believe that was even possible. I am seriously impressed. BTW, thanks for the info....

Register or Log In To remove these advertisements.