KS Christmas BONANZA ALOT of 67-72 truck parts!!

[JORGIE95961]

Originally Posted by teeitup

Jorgie, are you needing both defrost vents and just the pass AC housing/ball/outlet? If so $28 shipped for all that

Glen, pics Thurs for sure

69rumbler, I have a 72 I'm going to be parting, not sure how the chrome is yet, I will know more Thurs about it. I have mirror brackets for sure

Thanks Randy

I do not need the oblong dash vent whichever one that is.. but everything else is right

[teeitup]

Duane, no problem, thats basically what I was saying when I said AC control uses one

69rumbler, sorry no pay pal, money orders only, $10 shipped

Jorgie, Ok just the 3 pieces, $28 shipped

Thanks Randy

[69Rumbler]

Send me info
Thanks
Posted via Mobile Device

[fastcam1]

Hey Randy would you happen to have any of sway bar bushing retainers? I'm referring to the u shaped bracket that mount the bushing to the a arms.
Posted via Mobile Device

[rcm1958]

Hi Randy- What do you have in the way of a stock jack,etc. that would go behind the seat?

- Reed

[teeitup]

69rumbler, info sent

fastcam1, sorry none right now

Reed, sorry sold all those setups I had

Thanks Randy

[teeitup]

Guys I will try to get all caught up, I have been gone since Thurs night so it was hard to get pics when I've been out of town. Thanks Randy

[teeitup]

72bowtiestepper, Glenn, here are pics. Buckets, just need cleaned and painted. Bezels are driver quality, need cleaned and shined up

[teeitup]

pics for Jorgie, chrome ball chrome is worn

[rcm1958]

Hi Randy-
I'm going to keep trying---- tailgate (fleetisde)?? hubcaps??

-Reed

[teeitup]

Reed, sorry no good gates or caps right now. But I do know where a good gate is, thanks Randy
Posted via Mobile Device

[rcm1958]

Randy-
I would suspect that you could find out about this gate?? My current on is kind of tired....

Reed

[72bowtiestepper]

Originally Posted by teeitup

72bowtiestepper, Glenn, here are pics. Buckets, just need cleaned and painted. Bezels are driver quality, need cleaned and shined up

Thanks for the pics Randy....The headlight buckets are for a 72 correct ? I know that 67-68 are different. How much for all in your pics sent to 07838
(buckets & bezels ) ?

[teeitup]

Glenn, yes 72 correct, I took all these off a 72 I'm parting out. $37 shipped. I only take money orders. Thanks Randy

[72bowtiestepper]

Originally Posted by teeitup

Glenn, yes 72 correct, I took all these off a 72 I'm parting out. $37 shipped. I only take money orders. Thanks Randy

I'll take them Randy....Money order is fine with me. PM me with your info. I will get it out to you tomorrow. Thanks again....Glenn

[bopper_702]

do you have any deluxe knobs for whipers headlight and radio knobs?

[bopper_702]

or just plain black radio knobs?

[Chibueno]

interested in buying 6 cylinder P/S pump and brackets + power brake setup

[teeitup]

Glenn, I'll let you know when I get it in the mail

bopper_72, I have some 68-72 deluxe wiper and light knobs, no radio knobs

Chibeuno, Sorry no 6 cyl PS stuff. I have a 71-72 1/2 disc brake booster setup with all brackets on a truck I'm parting out., $70 shipped. Truck does not have motor or tranny, so selling it unknown condition. Thanks Randy

[72bowtiestepper]

Originally Posted by 72bowtiestepper

I'll take them Randy....Money order is fine with me. PM me with your info. I will get it out to you tomorrow. Thanks again....Glenn

Money order sent Randy Feb.16- 13 Also looking for a set of black interior plastic door panels for my 72 C-10 in good condition. I'm in no hurry for these, but keep me in mind. Thank's.....Glenn

[Jimbabwe]

Randy,
Could you tell me if you still have the following, and what the tally would be to ship to 10306 (Staten Island, NY):

* The 6 cyl. air cleaner and spacer (post 8 pic 4)

* what looks like the pipe that goes to the air cleaner from the manifold area on my 250 (post 27 pic 3) I may take 2 of these.

*pair of tan/faintly moldy green(just like mine!) vents (post 35 pic2)

* 6 cyl oil cap on valve cover (post 39 pic 1)

* and, if these are clutch pedal hole block-offs, one of these (post 40 pic 2)

I attached the pics.
Thanks, Jim

[davischevy]

I need the following for a small block 72,
Single groove, small block, power steering pump pulley.
Oil filler tube.
Heat stove (tube) set up, from exhaust manifold up to air cleaner.

Thanks

[teeitup]

Glenn, I will watch for you a set of door panels

Jim, I know I have the 6 cyl air cleaner and spacer, no tube, the ones you circled are for V8's. I will have to look on the vents. I should have the oil filler cap. And I do have the clutch delete. I will get better pics tomorrow of what I have for sure

davischevy, I'll have to look out there on all that stuff, I will in morning

Thanks Randy

[bopper_702]

how much do you need for the deluxe wiper and light knobs?
to 89030

[teeitup]

$10 shipped for the pair, Thanks Randy