CA Parting '72 LWB 1/2 ton - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dale_Brown · 02-13-2013, 04:09 PM

Looking for a grill if old blue k20 didn't already purchase it. Also need one head light retainer. All shipped to 21122

Dale_Brown

cheyenne shortstep · 02-13-2013, 04:57 PM

It had headers, I don't sell the truck rams horns because when I get a truck that needs them I don't want to hunt them down.

cheyenne shortstep · 02-13-2013, 05:00 PM

I've got a bunch of H/L retainers, let me dig up a good one and I'll post a pic.

cjohnson6772 · 02-14-2013, 09:20 AM

Quote:

Originally Posted by cheyenne shortstep

I could cut off the filler neck, $20.00 shipped.
No exhaust hangers the frame is gone.

Can you go $15 and I cover Paypal fees?
Posted via Mobile Device

cheyenne shortstep · 02-14-2013, 11:19 AM

If you read my original post it is Money Order only, $15.00 does not make it worth my while. $20.00 is barely breaking even after the cut and shipping.

cjohnson6772 · 02-14-2013, 12:11 PM

Quote:

Originally Posted by cheyenne shortstep

If you read my original post it is Money Order only, $15.00 does not make it worth my while. $20.00 is barely breaking even after the cut and shipping.

I'm sorry I missed the part about money order. That would put me at $23 with the money order. Gonna pass. Friend has a '70 locally I just wanted'72 but I'll make it work. Good luck with sel
Posted via Mobile Device

69Rumbler · 02-14-2013, 06:40 PM

how about the bench seat ? i work in Irwindale and can pick it up how bad is it ?
thank you

cheyenne shortstep · 02-15-2013, 01:15 AM

I'll take $75, has been redone kinda halfass but is usable, the frame and springs seem good. I will get a pic. for you.

Dale_Brown · 02-15-2013, 07:14 AM

Quote:

Originally Posted by cheyenne shortstep

I've got a bunch of H/L retainers, let me dig up a good one and I'll post a pic.

I dont need a pic of the headlight retainer. As long as its usable. Got to be better than Duct tape

.

Price shipped to 21122. Paypal?

cheyenne shortstep · 02-15-2013, 11:15 AM

Dale Brown, just so we are on the same page you need the stainless ring with 3 tabs. If correct I will do $10 shipped, no paypal, PM sent.

cheyenne shortstep · 02-16-2013, 02:56 PM

Seat pic for 69Rumbler, it is currently sitting in my '67 project truck.

rene495 · 02-18-2013, 01:20 AM

Selling the frame, if so how much and the condition

cheyenne shortstep · 02-18-2013, 05:33 PM

rene495, frame has been cut in half to make a trailer. It was quite rusty.

rene495 · 02-18-2013, 06:59 PM

Quote:

Originally Posted by cheyenne shortstep

rene495, frame has been cut in half to make a trailer. It was quite rusty.

ok. thank for the reply

Ajay · 02-18-2013, 09:42 PM

Do you have a steering center link? I need one bad.

cheyenne shortstep · 02-19-2013, 01:41 AM

Ajay, sorry but the center link went with the disc brakes to Dano69C10.

ChevyCruizer · 02-19-2013, 12:42 PM

How about the air cleaner? Also need one red tail light lense. I know the lense are cheap new, but it will be going on a beater truck and will work better than the red tape that is on there now. shipping is 89121

cheyenne shortstep · 02-19-2013, 04:15 PM

ChevyCruiser, please see my other parting thread titled "Parting '72 3/4 ton" for air cleaner and respond in thread, I will throw in a usable tailite lens at no charge.

**D.PASSMORE** · 02-19-2013, 05:35 PM

I need a straight single belt power steering (short-sbc) pulley and hardware that attaches it to shaft - nut, washer and key. Plus the nut and washer that hold pitman arm on - 2WD power steering gear. LMK, Thanks, David

cheyenne shortstep · 02-19-2013, 05:43 PM

D.PASSMORE, I have the nut and washer for pitman arm, no pulley stuff.
$5.00 shipped.

**D.PASSMORE** · 02-20-2013, 07:05 AM

Ok, PM your info to me, thx

ChevyCruizer · 02-21-2013, 12:40 PM

I just looked through the other thread. I did not notice the old fat style air cleaner that I thought I seen a sicture of in this thread.

Quote:

Originally Posted by cheyenne shortstep

ChevyCruiser, please see my other parting thread titled "Parting '72 3/4 ton" for air cleaner and respond in thread, I will throw in a usable tailite lens at no charge.

Thor69 · 02-21-2013, 10:26 PM

Hey do you have the parking brake levers, strut and strut spring available? If you do quote me for shipping to 33138, also if you have an accelerator pedal i need one as well.

Ryan Hubbard · 02-22-2013, 12:27 AM

I would like the clutch pedal and any other related parts for the clutch assembly.

cheyenne shortstep · 02-22-2013, 12:55 AM

RYAN HUBBARD, I may have the Z-bar but I do not have the clutch pedal or rod

Thor69, If you could be a little more specific I probably have the brake parts. As for the accelerator pedal assembly $35 shipped.

02-13-2013, 04:09 PM	#51
Dale_Brown Registered User Join Date: Dec 2012 Location: Pasadena, Maryland Posts: 169	Re: Parting '72 LWB 1/2 ton Looking for a grill if old blue k20 didn't already purchase it. Also need one head light retainer. All shipped to 21122 Dale_Brown

02-13-2013, 04:57 PM	#52
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Parting '72 LWB 1/2 ton It had headers, I don't sell the truck rams horns because when I get a truck that needs them I don't want to hunt them down.

02-13-2013, 05:00 PM	#53
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Parting '72 LWB 1/2 ton I've got a bunch of H/L retainers, let me dig up a good one and I'll post a pic.

02-14-2013, 11:19 AM	#55
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Parting '72 LWB 1/2 ton If you read my original post it is Money Order only, $15.00 does not make it worth my while. $20.00 is barely breaking even after the cut and shipping.

02-14-2013, 06:40 PM	#57
69Rumbler Registered User Join Date: Jan 2013 Location: Los Angeles Posts: 903	Re: Parting '72 LWB 1/2 ton how about the bench seat ? i work in Irwindale and can pick it up how bad is it ? thank you __________________ 1969 C20 CUSTOM "RUMBLEr"

02-15-2013, 01:15 AM	#58
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Parting '72 LWB 1/2 ton I'll take $75, has been redone kinda halfass but is usable, the frame and springs seem good. I will get a pic. for you.

02-15-2013, 11:15 AM	#60
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Parting '72 LWB 1/2 ton Dale Brown, just so we are on the same page you need the stainless ring with 3 tabs. If correct I will do $10 shipped, no paypal, PM sent.

02-16-2013, 02:56 PM	#61
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Parting '72 LWB 1/2 ton Seat pic for 69Rumbler, it is currently sitting in my '67 project truck. Attached Images

02-18-2013, 01:20 AM	#62
rene495 Registered User Join Date: Jun 2008 Location: Hill valley, california Posts: 49	Re: Parting '72 LWB 1/2 ton Selling the frame, if so how much and the condition

02-18-2013, 05:33 PM	#63
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Parting '72 LWB 1/2 ton rene495, frame has been cut in half to make a trailer. It was quite rusty.

02-18-2013, 09:42 PM	#65
Ajay Registered User Join Date: Sep 2012 Location: Austin, tx Posts: 2	Re: Parting '72 LWB 1/2 ton Do you have a steering center link? I need one bad.

02-19-2013, 01:41 AM	#66
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Parting '72 LWB 1/2 ton Ajay, sorry but the center link went with the disc brakes to Dano69C10.

02-19-2013, 12:42 PM	#67
ChevyCruizer 17's too small Join Date: Oct 2004 Location: Las Vegas, NV Posts: 335	Re: Parting '72 LWB 1/2 ton How about the air cleaner? Also need one red tail light lense. I know the lense are cheap new, but it will be going on a beater truck and will work better than the red tape that is on there now. shipping is 89121 __________________ 68 C10 SWB SS 5 lug power disc brake conversion 2.5 inch drop spindles van tilt column Air Ride Technologies Cool Ride air bag kits Performance Online tubular upper control arms and shock relocator kits ECE super track panhard bar 1 piece side windows

02-19-2013, 04:15 PM	#68
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Parting '72 LWB 1/2 ton ChevyCruiser, please see my other parting thread titled "Parting '72 3/4 ton" for air cleaner and respond in thread, I will throw in a usable tailite lens at no charge.

02-19-2013, 05:35 PM	#69
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: Parting '72 LWB 1/2 ton I need a straight single belt power steering (short-sbc) pulley and hardware that attaches it to shaft - nut, washer and key. Plus the nut and washer that hold pitman arm on - 2WD power steering gear. LMK, Thanks, David __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)



Register or Log In To remove these advertisements.

02-19-2013, 05:43 PM	#70
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Parting '72 LWB 1/2 ton D.PASSMORE, I have the nut and washer for pitman arm, no pulley stuff. $5.00 shipped.

02-20-2013, 07:05 AM	#71
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Re: Parting '72 LWB 1/2 ton Ok, PM your info to me, thx

02-21-2013, 10:26 PM	#73
Thor69 Registered User Join Date: Jul 2012 Location: miami, fl Posts: 11	Re: Parting '72 LWB 1/2 ton Hey do you have the parking brake levers, strut and strut spring available? If you do quote me for shipping to 33138, also if you have an accelerator pedal i need one as well.

02-22-2013, 12:27 AM	#74
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: Parting '72 LWB 1/2 ton I would like the clutch pedal and any other related parts for the clutch assembly.

02-22-2013, 12:55 AM	#75
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Parting '72 LWB 1/2 ton RYAN HUBBARD, I may have the Z-bar but I do not have the clutch pedal or rod Thor69, If you could be a little more specific I probably have the brake parts. As for the accelerator pedal assembly $35 shipped.

Register or Log In To remove these advertisements.