|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
02-25-2013, 09:12 AM
|
#1 |
|
Registered User
Join Date: Jul 2010
Location: Janesville, WI
Posts: 664
|
what year wheels will fit
I have a 71 2wd 3/4 ton what year steel wheels will interchange?
Posted via Mobile Device |
|
|
|
02-25-2013, 11:06 AM
|
#2 |
|
the boat guy
Join Date: Jul 2007
Location: springfield mo
Posts: 2,339
|
Re: what year wheels will fit
Any year with the right bolt pattern.
Year doesn't really matter much, some years these trucks were offered with 5, 6, and 8 lug wheels depending on equipment. Posted via Mobile Device
__________________
67, swb, fleet, tach, throttle, 5.3, 4l60e, 3.73's, fuel cell, 5 lug, p.d.b., 4-6 drop. great little truck 66, stevens drag/ski 18' silouette, 350, 2.02 doublehump heads. comp extreme marine 278 cam, vette 7 fin valve covers, old polished edelbrock intake, velvetdrive, casale v-drive, adj cavitation plate. 28, model a rpu project, |
|
|
|
|
02-25-2013, 11:40 AM
|
#3 |
|
Registered User
 
Join Date: Dec 2012
Location: Chandler AZ
Posts: 1,149
|
Re: what year wheels will fit
F**d, D**ge and GM used 8 lug on 6.5" patterns. They will all fit IF the center hole is big enough and clear your front brakes. I found some of a 74 for my old beater. I even have some from a 91 Chevy 3/4 ton on mine as spares right now.
Look for years with front disc brakes and you should be good.
__________________
1970 Longhorn, Front Disc, 350/4 bolt, 882 heads, HEI, Edelbrock, 700R4, HO-52/4.11. 1996 Corvette, Collector Roadster, LT4, 396, 450RWHP, 6sp, 4.11/Dana44/posi 5 point roll bar And let us not grow weary of doing good, for in due season we will reap, if we do not give up. Gal 6:9 |
|
|
|
|
02-25-2013, 12:25 PM
|
#4 |
|
20' Daredevil (Ret)
Join Date: May 2003
Location: Jefferson State
Posts: 13,586
|
Re: what year wheels will fit
Ford changed their 8-lug bolt pattern to 170mm in 1999. As stated above, all others will be 8x6.5" and should work as long as they fit over the axle stub (shouldn't be an issue as our axles are generally smaller than or equal to most others) and if they clear the front calipers.
__________________
- Mike - 1972 K20 LWB 350/350/205 RIP El Jay |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
