TX Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

REEDS 72 · 03-17-2013, 01:35 PM

Hi will you do 25 shipped on the tail light harness thanks.

**WIDESIDE72** · 03-17-2013, 01:40 PM

Quote:

Originally Posted by REEDS 72

Hi will you do 25 shipped on the tail light harness thanks.

It's yours. Pm sent with payment info
Posted via Mobile Device

brian1971 · 03-17-2013, 03:28 PM

payment sent for brake light switch thanks brian

the ideaman · 03-17-2013, 04:47 PM

Paypal sent.
Posted via Mobile Device

**WIDESIDE72** · 03-18-2013, 12:56 AM

Quote:

Originally Posted by GMCNUT

I will take the tilt steering column - will PM you to get payment details

Could you give me an idea when you will be paying for the column? I have someone else interested if you pass.
Posted via Mobile Device

**TBONE1964** · 03-18-2013, 05:30 AM

Sorry, I over looked the part of your post that states no PM's. I sent you one regarding the cluster and thought I would embarrass myself and ask if you would take $30.00 shipped for it. If not, I understand. It is all I have to spend at this time. Your price of $50.00 is a good price but out of my budget now. I had to ask.

Thank you,
Tom

Sloan66 · 03-18-2013, 06:56 AM

By chance do you have the clamp that holds the power steering lines t the frame? If so interested. Thx shipping to 37130

**WIDESIDE72** · 03-18-2013, 07:42 AM

Quote:

Originally Posted by Sloan66

By chance do you have the clamp that holds the power steering lines t the frame? If so interested. Thx shipping to 37130

I am goingback thurs and can pull it. $10 shipped
Posted via Mobile Device

**WIDESIDE72** · 03-18-2013, 07:43 AM

Quote:

Originally Posted by TBONE1964

Sorry, I over looked the part of your post that states no PM's. I sent you one regarding the cluster and thought I would embarrass myself and ask if you would take $30.00 shipped for it. If not, I understand. It is all I have to spend at this time. Your price of $50.00 is a good price but out of my budget now. I had to ask.

Thank you,
Tom

Due to the cost of shipping, I can't do $30, but how about $40?
Posted via Mobile Device

**TBONE1964** · 03-18-2013, 09:03 AM

Quote:

Originally Posted by WIDESIDE72

Due to the cost of shipping, I can't do $30, but how about $40?
Posted via Mobile Device

If you still have it on Friday March 22nd, I can get it for $40.00

I appreciate it,
Tom

Sloan66 · 03-18-2013, 09:25 AM

Great! PM me on payment info for the power steering line clamp. Thx

pbjsammich · 03-18-2013, 12:28 PM

I'd be interested in the gauge cluster if you might have an AC/Heater control panel to go with it? Trying to score these two items from the same seller if possible. Appreciate it!

Ken

**WIDESIDE72** · 03-19-2013, 04:27 AM

Bowtienut, you are up on the tilt
Posted via Mobile Device

**WIDESIDE72** · 03-19-2013, 04:29 AM

Quote:

Originally Posted by bowtietruknut

I'll take the steering column if it gets to me
Posted via Mobile Device

Youre up. Pm sent
Posted via Mobile Device

starfire58 · 03-19-2013, 01:23 PM

How about an uncut a/c dash panel?

**WIDESIDE72** · 03-19-2013, 01:33 PM

Quote:

Originally Posted by pbjsammich

I'd be interested in the gauge cluster if you might have an AC/Heater control panel to go with it? Trying to score these two items from the same seller if possible. Appreciate it!

Ken

At least one of the levers was broken on the Ac control in this truck but I have another one from a Cheyenne I parted. It would like to like to lay my hands on it first to make sure i really do have it and be sure of it's condition before I give a price on it, though.
Posted via Mobile Device

**WIDESIDE72** · 03-19-2013, 01:35 PM

Quote:

Originally Posted by starfire58

How about an uncut a/c dash panel?

I will ask the yard owner about getting it out. The dash in the truck is an ac dash and uncut, but I don't have any way of getting the spot welds loose.
Posted via Mobile Device

pbjsammich · 03-19-2013, 01:43 PM

Quote:

Originally Posted by WIDESIDE72

At least one of the levers was broken on the Ac control in this truck but I have another one from a Cheyenne I parted. It would like to like to lay my hands on it first to make sure i really do have it and be sure of it's condition before I give a price on it, though.
Posted via Mobile Device

Sounds good. Throw up a pic and price when available. Appreciate it!

**WIDESIDE72** · 03-19-2013, 08:39 PM

Tilt column still available.
Posted via Mobile Device

**WIDESIDE72** · 03-20-2013, 12:52 AM

Tilt column sold to gmcnut
Posted via Mobile Device

jjzepplin · 03-20-2013, 08:00 AM

Quote:

Originally Posted by jjzepplin

Do you have a rag joint? Can't seem to find one... Even on this forum.

Any luck? I need one with a 3/4" shaft spline.

**WIDESIDE72** · 03-20-2013, 01:22 PM

Quote:

Originally Posted by jjzepplin

Any luck? I need one with a 3/4" shaft spline.

I have not been back yet and won't be until friday
Posted via Mobile Device

**WIDESIDE72** · 03-21-2013, 08:03 AM

Ttt
Posted via Mobile Device

bronze 72 super · 03-21-2013, 01:01 PM

Payment made. PM sent on shipping info. Mike.

mvesr · 03-21-2013, 09:39 PM

Do you have a crank pulley for the power steering part number 3751232

Thanks-Mika

03-17-2013, 01:35 PM	#26
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets Hi will you do 25 shipped on the tail light harness thanks.

03-17-2013, 03:28 PM	#28
brian1971 Registered User Join Date: Sep 2012 Location: fort lauderdale,fl Posts: 1,296	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets payment sent for brake light switch thanks brian __________________ 1971 c10 custom deluxe fleetside swb LS3 w/BTR stage IV cam,4L85E w/3600 stall 67-72chevytrucks.com/vboard/showthread.php?t=558024

03-17-2013, 04:47 PM	#29
the ideaman Registered User Join Date: May 2009 Location: Central Valley,ca Posts: 174	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets Paypal sent. Posted via Mobile Device

03-18-2013, 05:30 AM	#31
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets Sorry, I over looked the part of your post that states no PM's. I sent you one regarding the cluster and thought I would embarrass myself and ask if you would take $30.00 shipped for it. If not, I understand. It is all I have to spend at this time. Your price of $50.00 is a good price but out of my budget now. I had to ask. Thank you, Tom

03-18-2013, 06:56 AM	#32
Sloan66 Registered User Join Date: Jan 2013 Location: Jackson, TN Posts: 215	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets By chance do you have the clamp that holds the power steering lines t the frame? If so interested. Thx shipping to 37130

03-18-2013, 09:25 AM	#36
Sloan66 Registered User Join Date: Jan 2013 Location: Jackson, TN Posts: 215	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets Great! PM me on payment info for the power steering line clamp. Thx

03-18-2013, 12:28 PM	#37
pbjsammich Registered User Join Date: Aug 2011 Location: Lake Conroe TX Posts: 53	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets I'd be interested in the gauge cluster if you might have an AC/Heater control panel to go with it? Trying to score these two items from the same seller if possible. Appreciate it! Ken __________________ 1967 C10 Stepside - "Minty" 1972 GMC 3500 - "Rojo Grande"

03-19-2013, 04:27 AM	#38
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets Bowtienut, you are up on the tilt Posted via Mobile Device

03-19-2013, 01:23 PM	#40
starfire58 Registered User Join Date: Oct 2012 Location: Streator, Illinois Posts: 123	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets How about an uncut a/c dash panel?

03-19-2013, 08:39 PM	#44
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets Tilt column still available. Posted via Mobile Device

03-20-2013, 12:52 AM	#45
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets Tilt column sold to gmcnut Posted via Mobile Device

03-21-2013, 08:03 AM	#48
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets Ttt Posted via Mobile Device

03-21-2013, 01:01 PM	#49
bronze 72 super Registered User Join Date: Sep 2007 Location: Rufus Oregon Posts: 1,187	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets Payment made. PM sent on shipping info. Mike.

03-21-2013, 09:39 PM	#50
mvesr Registered User Join Date: Sep 2012 Location: Arden NC Posts: 185	Re: Parted out a 72 Highlander; truck tilt, rust free core support, PS pump/ brackets Do you have a crank pulley for the power steering part number 3751232 Thanks-Mika



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.